Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations (SOR/2021-25)

Full Document:

HTMLFull Document: Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations (Accessibility Buttons available) |
XMLFull Document: Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations [785 KB] |
PDFFull Document: Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations [1280 KB]

Regulations are current to 2024-11-26 and last amended on 2021-10-31. Previous Versions

Table of Contents

Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations

SOR/2021-25

CANADA SHIPPING ACT, 2001

CANADIAN ENVIRONMENTAL PROTECTION ACT, 1999

ENVIRONMENTAL VIOLATIONS ADMINISTRATIVE MONETARY PENALTIES ACT

IMPACT ASSESSMENT ACT

Registration 2021-02-26

Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations

P.C. 2021-93 2021-02-26

Whereas, pursuant to subsection 332(1)Footnote ^a of the Canadian Environmental Protection Act, 1999Footnote ^b, the Minister of the Environment published in the Canada Gazette, Part I, on December 15, 2018 a copy of the proposed Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations, substantially in the annexed form, and persons were given an opportunity to file comments with respect to the proposed Regulations or to file a notice of objection requesting that a board of review be established and stating the reasons for the objection;

Return to footnote ^aS.C. 2004, c. 15, s. 31
Return to footnote ^bS.C. 1999, c. 33

Therefore, His Excellency the Administrator of the Government of Canada in Council, on the recommendation of the Minister of the Environment and the Minister of Health with respect to the provisions of the annexed Regulations other than section 82, and on the recommendation of the Minister of Transport with respect to that section 82, makes the annexed Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations pursuant to

(a) subsections 93(1) and 102(1) and sections 191 and 286.1Footnote ^c of the Canadian Environmental Protection Act (1999)Footnote ^b;
- Return to footnote ^cS.C. 2009, c. 14, s. 80
(b) subsection 120(1)Footnote ^d of the Canada Shipping Act, 2001Footnote ^e;
- Return to footnote ^dS.C. 2018, c. 27, s. 694
- Return to footnote ^eS.C. 2001, c. 26
(c) paragraph 109(b) of the Impact Assessment ActFootnote ^f; and
- Return to footnote ^fS.C. 2019, c. 28, s. 1
(d) subsection 5(1) of the Environmental Violations Administrative Monetary Penalties ActFootnote ^g.
- Return to footnote ^gS.C. 2009, c. 14, s. 126

Interpretation

Marginal note:Definitions

1 The following definitions apply in these Regulations.

Act

Act means the Canadian Environmental Protection Act, 1999. (Loi)

authorized carrier

authorized carrier means, as the case may be,

(a) a carrier that, in accordance with the Canada Shipping Act, 2001 and the regulations under that Act, transports — or is to transport — hazardous waste or hazardous recyclable material by means of a boat, ship or craft designed, used or capable of being used solely or partly for navigation in, on, through or immediately above water; and
(b) a carrier that transports — or is to transport — hazardous waste or hazardous recyclable material in accordance with the requirements of the jurisdiction in which the waste or recyclable material is transported. (transporteur agréé)

authorized facility

authorized facility means a facility that is authorized by the authorities of the jurisdiction in which it is located to dispose of hazardous waste by means of a disposal operation set out in column 2 of Part 1 of Schedule 1 or to recycle hazardous recyclable material by means of a recycling operation set out in column 2 of Part 2 of Schedule 1. (installation agréée)

Canada-USA Agreement

Canada-USA Agreement means the Agreement Between the Government of Canada and the Government of the United States of America Concerning the Transboundary Movement of Hazardous Waste, which entered into force on November 8, 1986, as amended from time to time. (accord Canada – États-Unis)

CAS Registry Number

CAS Registry Number means the identification number assigned to a substance by the Chemical Abstracts Service Division of the American Chemical Society. (numéro d’enregistrement CAS)

competent authority

competent authority means, in the case of a country that is a party to the Convention or is subject to OECD Decision C(2001)107/FINAL, the authority that is designated as the competent authority by that country under the Convention or under OECD Decision C(2001)107/FINAL, as the case may be, and, in the case of the United States, the United States Environmental Protection Agency. (autorité compétente)

consignee

consignee means a person that receives or is to receive delivery from a consignor of a shipment that contains hazardous waste or hazardous recyclable material at a site that they own, operate or otherwise control. (destinataire)

consignor

consignor means a person that, on their own behalf or on behalf of another person under an agreement or arrangement with that person, sends or is to send a shipment that contains hazardous waste or hazardous recyclable material from a site that is located in a province to a site that is located in another province and that is owned, operated or otherwise controlled by a consignee. (expéditeur)

contract

contract means a contract — or, if all of the parties are the same legal entity, an arrangement among those parties — that is in writing and is signed and, if parties are the same legal entity that is doing business in both Canada and another country, is signed by the representatives of that entity in both countries. (contrat)

Convention

Convention means the Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and Their Disposal, which entered into force on May 5, 1992. (Convention)

environmentally hazardous constituent

environmentally hazardous constituent means a constituent that is contained in a leachate and is set out in column 3 of Schedule 2 in a concentration that is determined to be equal to or greater than the concentration set out in column 4 of that Schedule in accordance with Method 1311: Toxicity Characteristic Leaching Procedure, as set out in Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846, Third Edition, published by the United States Environmental Protection Agency. (constituant dangereux pour l’environnement)

final disposal operation

final disposal operation means a disposal operation set out in column 2 of Part 1 of Schedule 1 that bears one of the disposal codes D1 to D12, DC1 and DC2 set out in column 1 of that Part. (opération finale d’élimination)

final recycling operation

final recycling operation means a recycling operation set out in column 2 of Part 2 of Schedule 1 that bears one of the recycling codes R1 to R11, RC1 and RC2 set out in column 1 of that Part. (opération finale de recyclage)

foreign exporter

foreign exporter means a person, including a government entity, in a foreign country that exports hazardous waste or hazardous recyclable material from that country for import into, or conveyance in transit through, Canada. (exportateur étranger)

foreign importer

foreign importer means a person, including a government entity, in a foreign country that imports into that country hazardous waste or hazardous recyclable material that is exported from, or conveyed in transit through, Canada. (importateur étranger)

interim disposal operation

interim disposal operation means a disposal operation set out in column 2 of Part 1 of Schedule 1 that bears one of the disposal codes D13 to D15 set out in column 1 of that Part. (opération préalable d’élimination)

interim recycling operation

interim recycling operation means a recycling operation set out in column 2 of Part 2 of Schedule 1 that bears one of the recycling codes R12, R13 and RC3 set out in column 1 of that Part. (opération préalable de recyclage)

line entry

line entry means

(a) in respect of a notification, an entry that appears on a separate numbered line in the notification with respect to a type of hazardous waste or hazardous recyclable material that is to be transported under the permit and that includes that line number and the information set out in subparagraphs 1(j)(i) to (iii), 2(j)(i) to (iii), 3(i)(i) to (iii), 4(i)(i) to (iii), 5(j)(i) to (iii) or 6(j)(i) to (iii) of Schedule 3, as the case may be;
(b) in respect of a movement document referred to in Part 1, an entry that appears on a separate numbered line in the movement document with respect to a type of hazardous waste or hazardous recyclable material that is to be transported under a permit and that includes that line number, the reference number of the notification for the permit and the line entry for that type of hazardous waste or hazardous recyclable material that is set out in the notification, with the exception of the information set out in clauses 1(j)(iii)(A), (F) and (L), 2(j)(iii)(A), (F) and (L), 3(i)(iii)(A), (F) and (L), 4(i)(iii)(A), (F) and (L), 5(j)(iii)(A), (E) and (K) or 6(j)(iii)(A), (E) and (K) of Schedule 3, as the case may be; and
(c) in respect of a movement document referred to in Part 2, an entry that appears on a separate numbered line in the movement document with respect to a type of hazardous waste or hazardous recyclable material that is to be shipped from a consignor to a site that is owned, operated or otherwise controlled by a consignee and that includes that line number and the information set out in paragraph 1(g) of Schedule 4. (ligne de renseignements)

movement document

movement document means, with respect to a shipment of hazardous waste or hazardous recyclable material, a document that is referred to

(a) in sections 15 and 16, if the shipment is imported to Canada;
(b) in sections 27 and 28, if the shipment is exported from Canada;
(c) in sections 39 and 40, if the shipment is exported from Canada and is imported to Canada after it is conveyed in transit through a foreign country;
(d) in sections 49 and 50, if the shipment is conveyed in transit through Canada;
(e) in sections 60 and 61, if the hazardous waste or hazardous recyclable material is returned to Canada;
(f) in sections 71 and 72, if the hazardous waste or hazardous recyclable material is returned to a foreign country of origin; and
(g) in section 80, if the shipment is moved within Canada. (document de mouvement)

municipality

municipality means an incorporated city, town, village, metropolitan authority, township, district, county or rural municipality in Canada. (municipalité)

notification

notification means a notification referred to in paragraph 185(1)(a) of the Act. (notification)

OECD Decision C(2001)107/FINAL

OECD Decision C(2001)107/FINAL means Decision C(2001)107/FINAL of the Organization for Economic Co-operation and Development, entitled Decision of the Council Concerning the Revision of Decision C(92)39/FINAL on the Control of Transboundary Movements of Wastes Destined for Recovery Operations, dated February 25, 2002. (décision C(2001)107/FINAL de l’OCDE)

PCB

PCB means polychlorinated biphenyl. (BPC)

permit

permit means a permit referred to in paragraph 185(1)(b) of the Act. (permis)

persistent organic pollutant

persistent organic pollutant means a substance set out in column 3 of Schedule 5 that is contained in hazardous waste or hazardous recyclable material, if the concentration is equal to or greater than the concentration set out in column 4 of that Schedule. (substance polluante organique persistante)

receiving facility

receiving facility means the first authorized facility that receives or is to receive hazardous waste or hazardous recyclable material for disposal or recycling under a permit or permits, whether the disposal or recycling operation that is to be performed at that facility is interim or final. (installation de réception)

recyclable material

recyclable material means anything that is to be recycled. (matière recyclable)

shipment

shipment means cargo, in one or more containers or in bulk, that is transported as a unit without being separated at any time during the movement and that

(a) in the case of a return to Canada or to a foreign country of origin, is shipped to the facility from which it was originally shipped or to the facility identified in the permit for the return;
(b) in the case of a movement within Canada, is shipped by a consignor to a site that is located in another province and that is owned, operated or otherwise controlled by a consignee; and
(c) in any other case, is shipped by one person from one facility in the country of origin to a receiving facility in the country of destination. (envoi)

sign

sign includes to sign by means of an electronic signature that is generated using a technology or process that is approved by the Minister for the purposes of submitting information to the Minister online. (signature)

unique identification number

unique identification number means a number assigned by a province or a country to identify a person, entity or facility. (numéro d’identification unique)

waste

waste means anything that is to be disposed of. (déchet)

Marginal note:Definition of hazardous waste

2 (1) For the purposes of Division 8 of Part 7 and Part 10 of the Act and these Regulations, hazardous waste means anything that is to be disposed of using one of the operations set out in column 2 of Part 1 of Schedule 1 and that
- (a) is set out in column 2 of Schedule 6;
- (b) meets the criteria for inclusion in one of Classes 2 to 6, 8 and 9 as set out in Part 2 of the Transportation of Dangerous Goods Regulations;
- (c) contains a substance set out in column 3 of Schedule 7 that is in a concentration equal to or greater than the concentration set out in column 4 of that Schedule;
- (d) produces a leachate that contains an environmentally hazardous constituent set out in column 3 of Schedule 2 that is in a concentration equal to or greater than the concentration set out in column 4 of that Schedule; or
- (e) is set out in column 3 of Schedule 8, is either pure or the only active ingredient and is unused.
Marginal note:Exclusions
(2) Hazardous waste referred to in subsection (1) does not include anything
- (a) that is to be transported in a quantity of less than 5 kg or 5 L per shipment, unless it contains mercury or meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations;
- (b) that remains in a container that is to be transported after the contents of that container have been removed to the maximum extent feasible and before the container is either refilled or cleaned of its residual contents;
- (c) that is mingled with non-hazardous waste or non-hazardous recyclable material and collected as part of the regular collection of non-hazardous waste and non-hazardous recyclable material by or on behalf of a municipality, unless it is separated from that waste or recyclable material during or after the collection;
- (d) that is personal or household waste of the individual who transports it; or
- (e) that is generated from the normal operations of a ship and whose discharge is authorized under the Canada Shipping Act, 2001.

Marginal note:Waste considered hazardous for export

3 (1) Anything that is to be disposed of using one of the operations set out in column 2 of Part 1 of Schedule 1, even if it is not hazardous waste within the meaning of subsection 2(1), is considered to be hazardous waste for the purposes of Division 8 of Part 7 and Part 10 of the Act and Divisions 1 to 4, 7 and 8 of Part 1 of these Regulations if it is to be exported to a country of destination or conveyed in transit through Canada or a foreign country and
- (a) it is defined as, or considered to be, hazardous under the legislation of the country of destination or country of transit;
- (b) its import is prohibited under the legislation of the country of destination; or
- (c) it is one of the hazardous wastes referred to in Article 1, subparagraph 1(a) of the Convention or of the other wastes referred to in Article 1, paragraph 2 of the Convention, with the exception of wastes referred to in Article 1, paragraphs 3 and 4 of the Convention — as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada — and the country of destination is a party to the Convention.
Marginal note:Waste considered hazardous for return to foreign country of origin
(2) Anything that is to be disposed of using one of the operations set out in column 2 of Part 1 of Schedule 1, even if it is not hazardous waste within the meaning of subsection 2(1), is considered to be hazardous waste for the purposes of Division 8 of Part 7 and Part 10 of the Act and Division 6 of Part 1 of these Regulations if it is to be conveyed in transit through a foreign country and it is defined as, or considered to be, hazardous under the legislation of that country.

Marginal note:Definition of hazardous recyclable material

4 (1) For the purposes of Division 8 of Part 7 and Part 10 of the Act and these Regulations, hazardous recyclable material means anything that is to be recycled using one of the operations set out in column 2 of Part 2 of Schedule 1 and that
- (a) is set out in column 2 of Schedule 6;
- (b) meets the criteria for inclusion in one of Classes 2 to 6, 8 and 9 as set out in Part 2 of the Transportation of Dangerous Goods Regulations;
- (c) contains a substance set out in column 3 of Schedule 7 that is in a concentration equal to or greater than the concentration set out in column 4 of that Schedule;
- (d) produces a leachate that contains an environmentally hazardous constituent set out in column 3 of Schedule 2 that is in a concentration equal to or greater than the concentration set out in column 4 of that Schedule; or
- (e) is set out in column 3 of Schedule 8, is either pure or the only active ingredient and is unused.
Marginal note:Exclusions — import, export and transit
(2) For the purposes of the provisions of Division 8 of Part 7 and Part 10 of the Act that relate to the import, export and conveyance in transit of hazardous recyclable material and for the purposes of Part 1 of these Regulations, hazardous recyclable material referred to in subsection (1) does not include anything
- (a) that is to be transported in a quantity of less than 5 kg or 5 L per shipment, unless it contains mercury or meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations;
- (b) that remains in a container that is to be transported after the contents of that container have been removed to the maximum extent feasible and before the container is either refilled or cleaned of its residual contents;
- (c) that is mingled with non-hazardous waste or non-hazardous recyclable material and collected as part of the regular collection of non-hazardous waste and non-hazardous recyclable material by or on behalf of a municipality, unless it is separated from that waste or recyclable material during or after the collection;
- (d) that is personal or household recyclable material of the individual who transports it;
- (e) that is generated from the normal operations of a ship and whose discharge is authorized under the Canada Shipping Act, 2001;
- (f) that is to be imported from a country of origin, or exported to a country of destination, that is subject to OECD Decision C(2001)107/FINAL, and, if applicable, that is to be conveyed in transit only through a country that is subject to that Decision, if it
  - (i) is to be imported or exported in a quantity of 25 kg or 25 L or less per shipment for the purpose of conducting analysis or research with respect to the recycling of that recyclable material,
  - (ii) does not contain an infectious substance that meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations, and
  - (iii) is accompanied by a document that includes the name and address of the importer or exporter and the words “test samples” or “échantillons d’épreuve”; or
- (g) that is to be imported from a country of origin, or exported to a country of destination, that is subject to OECD Decision C(2001)107/FINAL, and, if applicable, that is to be conveyed in transit only through a country that is a party to that Decision, if it
  - (i) is set out in Schedule 9,
  - (ii) is to be recycled by means of a recycling operation set out in column 2 of Part 2 of Schedule 1 at an authorized facility in the country of destination, and
  - (iii) is accompanied by one or more documents that demonstrate that the requirements of this paragraph are met.
Marginal note:Exclusions — movement within Canada
(3) For the purposes of the provisions of Division 8 of Part 7 and Part 10 of the Act that relate to the movement of hazardous recyclable material within Canada and for the purposes of Part 2 of these Regulations, hazardous recyclable material referred to in subsection (1) does not include anything
- (a) that is to be transported in a quantity of less than 5 kg or 5 L per shipment, unless it contains mercury or meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations;
- (b) that remains in a container that is to be transported after the contents of that container have been removed to the maximum extent feasible and before the container is either refilled or cleaned of its residual contents;
- (c) that is mingled with non-hazardous waste or non-hazardous recyclable material and collected as part of the regular collection of non-hazardous waste and non-hazardous recyclable material by or on behalf of a municipality, unless it is separated from that waste or recyclable material during or after the collection;
- (d) that is personal or household recyclable material of the individual who transports it;
- (e) that is generated from the normal operations of a ship and whose discharge is authorized under the Canada Shipping Act, 2001;
- (f) that satisfies the following conditions:
  - (i) it is to be transported in a quantity of 25 kg or 25 L or less per shipment for the purpose of conducting analysis or research with respect to the recycling of that recyclable material,
  - (ii) it does not contain an infectious substance that meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations, and
  - (iii) it is accompanied by a document that includes the name and address of the consignor or consignee and the words “test samples” or “échantillons d’épreuve”;
- (g) that satisfies the following conditions:
  - (i) it is set out in Schedule 9, and
  - (ii) it is to be recycled by means of a recycling operation set out in column 2 of Part 2 of Schedule 1;
- (h) that satisfies the following conditions:
  - (i) mercury is a component of it,
  - (ii) the mercury it contains is to be transported in a quantity of 50 mL or less per shipment,
  - (iii) it has reached the end of its useful life, and
  - (iv) it is to be recycled by means of a recycling operation set out in column 2 of Part 2 of Schedule 1; or
- (i) that satisfies the following conditions:
  - (i) it is a non-rechargeable or rechargeable cell or battery that does not meet the criteria in paragraph (1)(b), and
  - (ii) it is to be recycled by means of a recycling operation set out in Column 2 of Part 2 of Schedule 1.

Marginal note:Recyclable material considered hazardous for export

5 (1) Anything that is to be recycled using one of the operations set out in column 2 of Part 2 of Schedule 1, even if it is not hazardous recyclable material within the meaning of subsection 4(1), is considered to be hazardous recyclable material for the purposes of Division 8 of Part 7 and Part 10 of the Act and Divisions 1 to 5, 7 and 8 of Part 1 of these Regulations if it is to be exported to a country of destination or conveyed in transit through Canada or a foreign country and
- (a) it is defined as, or considered to be, hazardous under the legislation of the country of destination or country of transit;
- (b) its import is prohibited under the legislation of the country of destination; or
- (c) it is one of the hazardous wastes referred to in Article 1, subparagraph 1(a) of the Convention or of the other wastes referred to in Article 1, paragraph 2 of the Convention, with the exception of wastes referred to in Article 1, paragraphs 3 and 4 of the Convention — as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada — and the country of destination is a party to the Convention.
Marginal note:Recyclable material considered hazardous for return to foreign country of origin
(2) Anything that is to be recycled using one of the operations set out in column 2 of Part 2 of Schedule 1, even if it is not hazardous recyclable material within the meaning of subsection 4(1), is considered to be hazardous recyclable material for the purposes of Division 8 of Part 7 and Part 10 of the Act and Division 6 of Part 1 of these Regulations if it is to be conveyed in transit through a foreign country and it is defined as, or considered to be, hazardous under the legislation of that country.

PART 1Import, Export and Transit

DIVISION 1Import

Non-application

Marginal note:Non-application — Department of National Defence

6 Paragraphs 8(4)(b) to (e) and sections 14 to 18 do not apply to the import of hazardous waste or hazardous recyclable material by the Department of National Defence if that hazardous waste or hazardous recyclable material is generated by the Department in the course of an operation conducted by it outside Canada and is transported from the site of the operation to a defence establishment, as defined in subsection 2(1) of the National Defence Act, in or on a means of transport

(a) that is owned and operated by the Department or that is operated on behalf of the Department by
- (i) an employee of the Department,
- (ii) a member of the Canadian Forces, or
- (iii) any other person, if the means of transport is accompanied at all times by, and is under the direct responsibility of, an employee of the Department or a member of the Canadian Forces; or
(b) that is owned and operated by the military establishment of a member country of the North Atlantic Treaty Organization, or by the military establishment of another country under an agreement with the Department, or that is operated on behalf of such an establishment by
- (i) military or civilian personnel of that establishment, or
- (ii) any other person, if the means of transport is accompanied at all times by, and is under the direct responsibility of, military or civilian personnel of that establishment.

Import Permit

Marginal note:Applicant

7 A person may apply for a permit to import hazardous waste or hazardous recyclable material if

(a) they are an individual who is a resident of Canada or a corporation that has its head office, or operates a branch office, in Canada, and they
- (i) are the owner or operator of the receiving facility, or
- (ii) buy and sell — or are to buy and sell — hazardous recyclable material for recycling and are to import such recyclable material for recycling in Canada; or
(b) they are a municipality or Her Majesty in right of Canada or a province.

Marginal note:Form of application

8 (1) An application for a permit must be made to the Minister by means of a notification that is in the form specified by the Minister and that is dated and signed.
Marginal note:Notification
(2) The notification
- (a) must relate to either hazardous waste or hazardous recyclable material but not to both;
- (b) may relate to one or more types of hazardous waste or hazardous recyclable material;
- (c) may relate to one or more shipments that contain the hazardous waste or hazardous recyclable material; and
- (d) must involve only
  - (i) one foreign exporter,
  - (ii) one facility in the country of origin from which the hazardous waste or hazardous recyclable material is to be shipped, and
  - (iii) one receiving facility in Canada to which the hazardous waste or hazardous recyclable material is to be delivered.
Marginal note:Types of hazardous waste or hazardous recyclable material
(3) The hazardous waste or hazardous recyclable material must be categorized into separate types by reference to all of the information set out in subparagraphs 1(j)(i) to (iii) of Schedule 3 and each type for which all of that information is the same must be recorded as a line entry in the notification.
Marginal note:Information in notification
(4) The information set out in subparagraphs 1(j)(i) to (iii) of Schedule 3 must be included in each line entry and the remaining information set out in item 1 of that Schedule must be included in the notification along with a certification, which is dated and signed by the individual who provides the information, that
- (a) the applicant satisfies the conditions in section 7;
- (b) the applicant and all authorized carriers that are to transport the hazardous waste or hazardous recyclable material in Canada hold the liability insurance referred to in Division 7 of this Part;
- (c) all aspects of the proposed import of the hazardous waste or hazardous recyclable material and of a possible return under Division 6 of this Part in the circumstances set out in clauses 14(1)(u)(iii)(B) and (v)(iii)(B), other than transportation by an authorized carrier, are governed by one or more contracts to which the applicant, the foreign exporter and the facility in the country of origin from which the hazardous waste or hazardous recyclable material is to be shipped are parties;
- (d) all aspects of the proposed disposal of the hazardous waste or recycling of the hazardous recyclable material are governed by one or more contracts to which the receiving facility and the applicant are parties;
- (e) if the receiving facility is to dispose of hazardous waste or recycle hazardous recyclable material under the permit or permits by means of an interim disposal operation or interim recycling operation, all aspects of the proposed disposal of the hazardous waste by means of a final disposal operation, or the proposed recycling of the hazardous recyclable material by means of a final recycling operation, are governed by one or more contracts to which the receiving facility and the authorized facility that is to perform a final disposal operation or final recycling operation are parties;
- (f) the applicant will ensure that the hazardous waste or hazardous recyclable material is managed in a manner that protects the environment and human health against the adverse effects that may result from it; and
- (g) the information provided is accurate and complete.
Marginal note:Timing and manner of notification
(5) The notification must be made in the manner specified by the Minister
- (a) within 12 months before the day on which the shipment that contains the hazardous waste or hazardous recyclable material is to be shipped, in the case of a single shipment; and
- (b) within 12 months before the day on which the first shipment is to be shipped, in the case of multiple shipments.

Marginal note:Refusal to issue permit

9 The Minister must refuse to issue a permit if

(a) an authorization referred to in subparagraph 185(1)(b)(i) of the Act is not obtained, unless the circumstances in subsection 185(4) of the Act apply;
(b) the Minister has reasonable grounds to believe that, if the permit were issued, the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, under the permit would not comply with the Act, these Regulations or conditions to an authorization imposed by the jurisdiction of destination or a country of transit; or
(c) the Minister has reasonable grounds to believe that false or misleading information was provided in the notification under section 8.

Marginal note:Period of validity of permit

10 A permit is valid for the period set out in it, which cannot be longer than

(a) 36 months after the day on which it is issued, in the case of hazardous recyclable material
- (i) that is to be imported from a country of origin that is subject to OECD Decision C(2001)107/FINAL and, if applicable, conveyed in transit only through a country that is subject to that Decision, and
- (ii) that is to be recycled by means of a final recycling operation at a receiving facility that is a pre-consented recovery facility referred to in Case 2 in Chapter II. D (2) of OECD Decision C(2001)107/FINAL, as amended from time to time, to the extent that the amendments are binding on Canada; and
(b) 12 months after the day on which it is issued, in any other case.

Marginal note:New application

11 If a permit needs to be amended the permit holder must apply for a new permit.

Marginal note:Suspension of permit required

12 (1) The Minister must suspend a permit if an authority referred to in subparagraph 185(1)(b)(i) of the Act withdraws an authorization referred to in that subparagraph.
Marginal note:Optional suspension of permit
(2) The Minister may suspend a permit if the Minister has reasonable grounds to believe that
- (a) the permit holder no longer satisfies the conditions in section 7;
- (b) the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, under the permit does not comply — or will not comply — with the Act, these Regulations or the conditions of an authorization imposed by the jurisdiction of destination or a country of transit;
- (c) false or misleading information was provided in the notification under section 8;
- (d) as a result of a natural or artificial disaster or another emergency, the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, cannot be in accordance with the permit; or
- (e) the hazardous waste or hazardous recyclable material is not being managed in a manner that will protect the environment and human health against the adverse effects that may result from it.
Marginal note:Notice
(3) The Minister must notify the permit holder of the suspension, the reasons for it and the period during which it applies.
Marginal note:Manner of notice
(4) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the suspension and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(5) The permit holder may make written representations to the Minister as to why the permit should be reinstated within the period of the suspension.
Marginal note:Reinstatement of permit
(6) The Minister may reinstate the permit only if the matter that gave rise to the suspension has been resolved or corrected during the period of the suspension.

Marginal note:Revocation of permit

13 (1) The Minister must revoke a permit if the matter that gave rise to a suspension has not been resolved or corrected within the period of suspension or if the permit holder requests the revocation.
Marginal note:Notice
(2) Before revoking a permit, the Minister must notify the permit holder of the proposed revocation and the reasons for it.
Marginal note:Manner of notice
(3) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the proposed revocation and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(4) The permit holder may make written representations to the Minister as to why the permit should not be revoked.
Marginal note:Date of revocation
(5) The revocation of a permit is not effective until 20 days after the day on which the Minister notifies the permit holder.

Conditions Under Paragraph 185(1)(c) of the Act

Conditions Relating to Import

Marginal note:Conditions

14 (1) For the purposes of paragraph 185(1)(c) of the Act, the prescribed conditions for the import of hazardous waste or hazardous recyclable material under one or more permits that are held by a permit holder are the following:
- (a) the movement, and the disposal or recycling, of the hazardous waste or hazardous recyclable material must be in accordance with the permit or permits;
- (b) the import must not be prohibited under the laws of Canada;
- (c) the country of origin must be a party to the Convention or the Canada-USA Agreement or must be subject to OECD Decision C(2001)107/FINAL and the export of the hazardous waste or hazardous recyclable material must not be prohibited by that country;
- (d) the conveyance in transit of the hazardous waste or hazardous recyclable material through a country must not be prohibited by that country;
- (e) biomedical waste set out in item 1 of Schedule 6 or anything that meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations must be disposed of by means of a final disposal operation;
- (f) if anything contains PCBs in a concentration greater than 50 mg per kg, the PCBs in that thing or in any residue from its decontamination must be destroyed or irreversibly transformed;
- (g) the permit holder and all authorized carriers that transport the hazardous waste or hazardous recyclable material in Canada must hold the liability insurance referred to in Division 7 of this Part;
- (h) all of the contracts referred to in paragraphs 8(4)(c) to (e) must be in effect;
- (i) every contract referred to in paragraph 8(4)(c) must
  - (i) describe each type of hazardous waste or hazardous recyclable material that is to be imported under the contract,
  - (ii) set out the quantity of each type of hazardous waste or hazardous recyclable material,
  - (iii) identify the operation set out in column 2 of Part 1 or 2 of Schedule 1 that is to be performed on each type of hazardous waste or hazardous recyclable material,
  - (iv) state that the hazardous waste or hazardous recyclable material is to be imported in accordance with the permit, and
  - (v) require the foreign exporter and the facility to take all feasible measures to assist the permit holder to satisfy the conditions under paragraph 185(1)(c) of the Act;
- (j) every contract referred to in paragraphs 8(4)(d) and (e) must
  - (i) describe each type of hazardous waste or hazardous recyclable material that is to be imported under the contract,
  - (ii) set out the quantity of each type of hazardous waste that is to be disposed of, or hazardous recyclable material that is to be recycled, at the authorized facility,
  - (iii) identify the operation set out in column 2 of Part 1 or 2 of Schedule 1 that is to be performed on each type of hazardous waste or hazardous recyclable material at the authorized facility,
  - (iv) state that the hazardous waste is to be disposed of, or the hazardous recyclable material is to be recycled, in accordance with the permit,
  - (v) require the authorized facility to notify the permit holder in writing, within 30 days after the day on which the authorized facility completes an interim or final disposal operation for a type of hazardous waste, or an interim or final recycling operation for a type of hazardous recyclable material, that is recorded as a line entry in the movement document,
    - (A) of the date on which the operation was completed,
    - (B) of the reference number of the movement document, and the line number of the line entry in the movement document, that applies to that type of hazardous waste or hazardous recyclable material, and
    - (C) that the operation was completed in a manner that protects the environment and human health against the adverse effects that may result from the hazardous waste or hazardous recyclable material, and
  - (vi) require the authorized facility to take all feasible measures to assist the permit holder to satisfy the conditions under paragraph 185(1)(c) of the Act;
- (k) every contract referred to in paragraph 8(4)(e) must require the receiving facility to provide the authorized facility that is to dispose of a type of hazardous waste or recycle a type of hazardous recyclable material that was contained in the shipment by means of a final disposal operation or final recycling operation with the reference number of the movement document and the line number of the line entry in the movement document that applies to that type of hazardous waste or hazardous recyclable material;
- (l) each shipment must be recorded in a separate movement document in accordance with sections 15 and 16;
- (m) the movement document completed in accordance with section 16 must be provided, in accordance with that section, to the Minister and the authorities of the province where the receiving facility is located;
- (n) while they transport the shipment, every authorized carrier must produce the permit or permits, and Parts A and B of the movement document completed in accordance with section 16, when they are required to do so to demonstrate that the movement of the shipment complies with this Division;
- (o) the permit or permits, and Parts A and B of the movement document completed in accordance with section 16, must be provided to a customs office when the hazardous waste or hazardous recyclable material that is contained in the shipment is required to be reported at the customs office under section 12 of the Customs Act;
- (p) if the receiving facility is to dispose of a type of hazardous waste or recycle a type of hazardous recyclable material under the permit or permits by means of an interim disposal operation or interim recycling operation, it must complete the disposal of all of the hazardous waste, or the recycling of all of the hazardous recyclable material, of that type that is contained in a shipment, either within a period of 180 days after the day on which the shipment is delivered to it or within a shorter period required by the authorities of the jurisdiction in which it is located;
- (q) if the receiving facility is to dispose of a type of hazardous waste or recycle a type of hazardous recyclable material under the permit or permits by means of a final disposal operation or final recycling operation, it must complete the disposal of all of the hazardous waste, or the recycling of all of the hazardous recyclable material, of that type that is contained in a shipment, either within a period of one year after the day on which the shipment is delivered to it or within a shorter period required by the authorities of the jurisdiction in which it is located;
- (r) if an authorized facility other than a receiving facility is to dispose of a type of hazardous waste or recycle a type of hazardous recyclable material under the permit or permits by means of a final disposal operation or final recycling operation, it must complete the disposal of all of the hazardous waste, or the recycling of all of the hazardous recyclable material, of that type that was contained in a shipment delivered to the receiving facility and that was sent to the authorized facility by the receiving facility, either within a period of 18 months after the day on which the shipment was delivered to the receiving facility or within a shorter period required by the authorities of the jurisdiction in which the authorized facility is located;
- (s) the Minister must be provided with confirmation of the disposal of the hazardous waste by means of an operation set out in column 2 of Part 1 of Schedule 1, or of the recycling of the hazardous recyclable material by means of an operation set out in column 2 of Part 2 of Schedule 1, in accordance with section 17;
- (t) the documents referred to in section 18 must be kept in accordance with that section;
- (u) if the permit holder is notified that the receiving facility does not accept hazardous waste or hazardous recyclable material that is contained in a shipment that is shipped in accordance with the Act and these Regulations, or that it cannot, or refuses to, dispose of that hazardous waste or recycle that hazardous recyclable material in accordance with the permit,
  - (i) the permit holder must immediately notify the Minister and the foreign exporter of the situation and the reason for it,
  - (ii) if necessary, the permit holder must store the hazardous waste or hazardous recyclable material in a facility that is authorized for that purpose by the authorities of the jurisdiction in which the facility is located,
  - (iii) within 90 days after the day on which the Minister is notified or within any other period of time that is agreed to by the Minister and the competent authority of the country of origin, the permit holder must either
    - (A) make all necessary arrangements to dispose of the hazardous waste by means of a final disposal operation, or to recycle the hazardous recyclable material by means of a final recycling operation, at another authorized facility in Canada and provide the Minister with the name and address of, and the name of a contact person for, that authorized facility, the reference number of the movement document and, for each type of hazardous waste or hazardous recyclable material, the line number of the applicable line entry in the movement document, the quantity in kilograms or litres and the applicable disposal or recycling code set out in column 1 of either Part 1 or 2 of Schedule 1, or
    - (B) in accordance with Division 6 of this Part, return the hazardous waste or hazardous recyclable material to the country of origin under an export permit for the return,
  - (iv) the hazardous waste or hazardous recyclable material must not be transported to an authorized facility referred to in clause (iii)(A) unless the permit holder has received confirmation from the Minister that the authorities of the jurisdiction in which the authorized facility is located have approved its disposal or recycling at that authorized facility, and
  - (v) if the hazardous waste or hazardous recyclable material is transported to an authorized facility referred to in clause (iii)(A) for disposal or recycling, the authorized facility must complete the disposal of all of the hazardous waste by means of a final disposal operation, or the recycling of all of the hazardous recyclable material by means of a final recycling operation, within one year after the expiry of the period referred to in subparagraph (iii); and
- (v) if a shipment is imported in accordance with the Act and these Regulations but the Minister notifies the permit holder that the Minister does not accept hazardous waste or hazardous recyclable material that is contained in the shipment or that hazardous waste or hazardous recyclable material that is contained in the shipment cannot be moved, disposed of or recycled in accordance with the permit,
  - (i) the permit holder must immediately notify the foreign exporter of the situation and the reason for it,
  - (ii) if necessary, the permit holder must store the hazardous waste or hazardous recyclable material in a facility that is identified for that purpose by the Minister,
  - (iii) within 90 days after the day on which the Minister notifies the permit holder or within any other period of time that is agreed to by the Minister and the competent authority of the country of origin, the permit holder must either
    - (A) make all necessary arrangements to dispose of the hazardous waste by means of a final disposal operation, or to recycle the hazardous recyclable material by means of a final recycling operation, at an authorized facility in Canada and provide the Minister with the name and address of, and the name of a contact person for, that authorized facility, the reference number of the movement document and, for each type of hazardous waste or hazardous recyclable material, the line number of the applicable line entry in the movement document, the quantity in kilograms or litres and the applicable disposal or recycling code set out in column 1 of either Part 1 or 2 of Schedule 1, or
    - (B) in accordance with Division 6 of this Part, return the hazardous waste or hazardous recyclable material to the country of origin under an export permit for the return,
  - (iv) the hazardous waste or hazardous recyclable material must not be transported to an authorized facility referred to in clause (iii)(A) unless the permit holder has received confirmation from the Minister that the authorities of the jurisdiction in which the authorized facility is located have approved its disposal or recycling at that authorized facility, and
  - (v) if the hazardous waste or hazardous recyclable material is transported to an authorized facility referred to in clause (iii)(A) for disposal or recycling, the authorized facility must complete the disposal of all of the hazardous waste by means of a final disposal operation, or the recycling of all of the hazardous recyclable material by means of a final recycling operation, within one year after the expiry of the period referred to in subparagraph (iii).
Marginal note:Delivery to receiving facility
(2) For the purposes of paragraphs (1)(p) to (r), delivery of a shipment to the receiving facility occurs when the shipment arrives at the receiving facility, regardless of whether or when hazardous waste or hazardous recyclable material that is contained in the shipment is accepted by the receiving facility.
Marginal note:Necessary arrangements
(3) The necessary arrangements referred to in clauses (1)(u)(iii)(A) and (v)(iii)(A) must include a requirement that the authorized facility notify the permit holder in writing, within 30 days after the day on which the authorized facility completes a final disposal operation for a type of hazardous waste, or a final recycling operation for a type of hazardous recyclable material, that is recorded as a line entry in the movement document,
- (a) of the date on which the operation was completed;
- (b) of the reference number of the movement document, and the line number of the line entry in the movement document, that applies to that type of hazardous waste or hazardous recyclable material; and
- (c) that the operation was completed in a manner that protects the environment and human health against the adverse effects that may result from the hazardous waste or hazardous recyclable material.
Marginal note:Manner of notice
(4) For the purposes of subparagraph (1)(v)(iii), the Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice is available through a generally accessible electronic source and identifies the location of the notice; or
- (b) sends the notice to the permit holder’s last known address or email address.

Movement Document

Marginal note:Unit of measure

15 The unit of measure set out in the movement document to describe the quantity of a type of hazardous waste or hazardous recyclable material must be the same as that used in the applicable permit.

Marginal note:Part A

16 (1) Before a shipment that contains hazardous waste or hazardous recyclable material is shipped from a facility under one or more permits, Part A of the movement document must be completed as follows:
- (a) each type of hazardous waste or hazardous recyclable material that is contained in the shipment and that was recorded as a line entry in the notification under subsection 8(3) must be recorded as a line entry;
- (b) each line entry must include the reference number of the notification, the line entry number and the information that was included in the line entry in the notification under subsection 8(4) — with the exception of the information referred to in clauses 1(j)(iii)(A), (F) and (L) of Schedule 3;
- (c) the remaining information set out in subitem 1(1) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (d) the individual who provides the information and certification must date and sign Part A.
Marginal note:Part A to Minister and provincial authorities
(2) Within three working days after the day on which the shipment is shipped from the facility, Part A of the movement document must be provided, in the form and manner specified by the Minister, to the Minister and to the authorities of the province where the receiving facility is located, if those authorities ask for it.
Marginal note:Part B
(3) Each authorized carrier that transports the shipment must complete Part B of the movement document — of which Part A was completed in accordance with subsection (1) — by including the information set out in item 2 of Schedule 10 and a certification that the information provided is accurate and complete. The individual who provides the information and certification must date and sign Part B.
Marginal note:Part C
(4) Immediately after the shipment is delivered to the receiving facility, Part C of the movement document — of which Part A was completed in accordance with subsection (1) — must be completed as follows:
- (a) the information set out in subitem 3(1) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (b) the individual who provides the information and certification must date and sign Part C.
Marginal note:Parts B and C to Minister and provincial authorities
(5) Within three working days after the day on which the shipment is delivered to the receiving facility, Part B of the movement document completed by each authorized carrier and Part C of the movement document must be provided, in the form and manner specified by the Minister, to the Minister and to the authorities of the province where the receiving facility is located, if those authorities ask for it.
Marginal note:Amendments to Part C
(6) Part C of the movement document may be amended only with respect to the quantities specified in it. The amendments must be made in the form and manner specified by the Minister and before the confirmation under subsection 17(1) is to be filed with the Minister.
Marginal note:Delivery to receiving facility
(7) For the purposes of subsections (4) and (5), delivery of a shipment to the receiving facility occurs when the shipment arrives at the receiving facility, regardless of whether or when hazardous waste or hazardous recyclable material that is contained in the shipment is accepted by the receiving facility.

Confirmation of Disposal or Recycling

Marginal note:Confirmation

17 (1) Within 30 days after the day on which the disposal by means of an operation set out in column 2 of Part 1 of Schedule 1 of a type of hazardous waste, or the recycling by means of an operation set out in column 2 of Part 2 of Schedule 1 of a type of hazardous recyclable material, that is recorded as a line entry in a movement document is completed, the Minister must be provided with a confirmation, based on the written notice received by the permit holder from the authorized facility that performed the operation, that the operation was completed
- (a) in accordance with the permit or, if applicable, with the arrangements referred to in clause 14(1)(u)(iii)(A) or (v)(iii)(A);
- (b) within the period set out in one of paragraphs 14(1)(p) to (r) or subparagraph 14(1)(u)(v) or (v)(v), as the case may be; and
- (c) in a manner that protects the environment and human health against the adverse effects that may result from the hazardous waste or hazardous recyclable material.
Marginal note:Form and manner of confirmation
(2) The confirmation must be provided in the form and manner specified by the Minister.
Marginal note:Additional information in confirmation
(3) The confirmation
- (a) must identify the reference number of the movement document, the line number of the line entry in the movement document and the disposal or recycling code set out in column 1 of either Part 1 or 2 of Schedule 1 that applies to the type of hazardous waste or hazardous recyclable material and the date on which the operation was completed; and
- (b) must be dated and signed by the individual who provides it and must include that individual’s name and telephone number.

Record Retention

Marginal note:Permit holder

18 (1) The permit holder must keep the following documents that relate to hazardous waste or hazardous recyclable material that is transported under one or more permits at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires:
- (a) all documents that are necessary to demonstrate their compliance with this Division;
- (b) every notice that is referred to in subparagraph 14(1)(j)(v) or subsection 14(3);
- (c) all contracts that relate to the movement, and the disposal or recycling, of the hazardous waste or hazardous recyclable material; and
- (d) all documents that are necessary to demonstrate that they hold the liability insurance referred to in Division 7 of this Part.
Marginal note:Authorized carrier
(2) Each authorized carrier that has a place of business in Canada must keep the following documents that relate to a shipment that contains hazardous waste or hazardous recyclable material that they transported under one or more permits at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires:
- (a) all documents that are necessary to demonstrate that the movement of the shipment complies with this Division; and
- (b) if the authorized carrier transported the shipment in Canada, all documents that are necessary to demonstrate that they hold the liability insurance referred to in Division 7 of this Part.

DIVISION 2Export

Export Permit

Marginal note:Applicant

19 A person may apply for a permit to export hazardous waste or hazardous recyclable material if

(a) they are an individual who is a resident of Canada or a corporation that has its head office, or operates a branch office, in Canada, and they
- (i) are the owner or operator of the facility from which the hazardous waste or hazardous recyclable material is to be shipped, or
- (ii) buy and sell — or are to buy and sell — hazardous recyclable material for recycling and are to export such recyclable material for recycling in a country of destination that is subject to OECD Decision C(2001)107/FINAL; or
(b) they are a municipality or Her Majesty in right of Canada or a province.

Marginal note:Form of application

20 (1) An application for a permit must be made to the Minister by means of a notification that is in the form specified by the Minister and that is dated and signed.
Marginal note:Notification
(2) The notification
- (a) must relate to either hazardous waste or hazardous recyclable material but not to both;
- (b) may relate to one or more types of hazardous waste or hazardous recyclable material;
- (c) may relate to one or more shipments that contain the hazardous waste or hazardous recyclable material; and
- (d) must involve only
  - (i) one foreign importer,
  - (ii) one facility in Canada from which the hazardous waste or hazardous recyclable material is to be shipped, and
  - (iii) one receiving facility in the country of destination to which the hazardous waste or hazardous recyclable material is to be delivered.
Marginal note:Types of hazardous waste or hazardous recyclable material
(3) The hazardous waste or hazardous recyclable material must be categorized into separate types by reference to all of the information set out in subparagraphs 2(j)(i) to (iii) of Schedule 3 and each type for which all of that information is the same must be recorded as a line entry in the notification.
Marginal note:Information in notification
(4) The information set out in subparagraphs 2(j)(i) to (iii) of Schedule 3 must be included in each line entry and the remaining information set out in item 2 of that Schedule must be included in the notification along with a certification, which is dated and signed by the individual who provides the information, that
- (a) the applicant satisfies the conditions set out in section 19;
- (b) the applicant and all authorized carriers that are to transport the hazardous waste or hazardous recyclable material in Canada hold the liability insurance referred to in Division 7 of this Part;
- (c) all aspects of the proposed export of the hazardous waste or hazardous recyclable material and of a possible return under Division 5 of this Part in the circumstances set out in clauses 26(1)(v)(iii)(B) and (w)(iii)(B), other than transportation by an authorized carrier, are governed by one or more contracts to which the applicant, the foreign importer and the facility in Canada from which the hazardous waste or hazardous recyclable material is to be shipped are parties;
- (d) all aspects of the proposed disposal of the hazardous waste or recycling of the hazardous recyclable material are governed by one or more contracts to which the receiving facility and the applicant are parties;
- (e) if the receiving facility is to dispose of hazardous waste or recycle hazardous recyclable material under the permit or permits by means of an interim disposal operation or interim recycling operation, all aspects of the proposed disposal of the hazardous waste by means of a final disposal operation, or the proposed recycling of the hazardous recyclable material by means of a final recycling operation, are governed by one or more contracts to which the receiving facility and the authorized facility that is to perform a final disposal operation or final recycling operation are parties;
- (f) the applicant will ensure that the hazardous waste or hazardous recyclable material is managed in a manner that protects the environment and human health against the adverse effects that may result from it; and
- (g) the information provided is accurate and complete.
Marginal note:Timing and manner of notification
(5) The notification must be made in the manner specified by the Minister
- (a) within 12 months before the day on which the shipment that contains the hazardous waste or hazardous recyclable material is to be shipped, in the case of a single shipment; and
- (b) within 12 months before the day on which the first shipment is to be shipped, in the case of multiple shipments.

Marginal note:Refusal to issue permit

21 The Minister must refuse to issue a permit if

(a) an authorization referred to in subparagraph 185(1)(b)(i) of the Act is not obtained, unless the circumstances in subsection 185(4) of the Act apply;
(b) the Minister has reasonable grounds to believe that, if the permit were issued, the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, under the permit would not comply with the Act, these Regulations or conditions to an authorization imposed by the country of destination or a country of transit; or
(c) the Minister has reasonable grounds to believe that false or misleading information was provided in the notification under section 20.

Marginal note:Period of validity of permit

22 A permit is valid for the period set out in it, which cannot be longer than

(a) 36 months after the day on which it is issued, in the case of hazardous recyclable material
- (i) that is to be exported to a country of destination that is subject to OECD Decision C(2001)107/FINAL and, if applicable, conveyed in transit only through a country that is subject to that Decision, and
- (ii) that is to be recycled by means of a final recycling operation at a receiving facility that is a pre-consented recovery facility referred to in Case 2 in Chapter II. D (2) of OECD Decision C(2001)107/FINAL, as amended from time to time, to the extent that the amendments are binding on Canada; and
(b) 12 months after the day on which it is issued, in any other case.

Marginal note:New application

23 If a permit needs to be amended the permit holder must apply for a new permit.

Marginal note:Suspension of permit required

24 (1) The Minister must suspend a permit if an authority referred to in subparagraph 185(1)(b)(i) of the Act withdraws an authorization referred to in that subparagraph.
Marginal note:Optional suspension of permit
(2) The Minister may suspend a permit if the Minister has reasonable grounds to believe that
- (a) the permit holder no longer satisfies the conditions set out in section 19;
- (b) the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, under the permit does not comply — or will not comply — with the Act, these Regulations or the conditions of an authorization imposed by the jurisdiction of destination or a country of transit;
- (c) false or misleading information was provided in the notification under section 20;
- (d) as a result of a natural or artificial disaster or another emergency, the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, cannot be in accordance with the permit; or
- (e) the hazardous waste or hazardous recyclable material is not being managed in a manner that will protect the environment and human health against the adverse effects that may result from it.
Marginal note:Notice
(3) The Minister must notify the permit holder of the suspension, the reasons for it and the period during which it applies.
Marginal note:Manner of notice
(4) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the suspension and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(5) The permit holder may make written representations to the Minister as to why the permit should be reinstated within the period of the suspension.
Marginal note:Reinstatement of permit
(6) The Minister may reinstate the permit only if the matter that gave rise to the suspension has been resolved or corrected during the period of the suspension.

Marginal note:Revocation of permit

25 (1) The Minister must revoke a permit if the matter that gave rise to a suspension has not been resolved or corrected within the period of suspension or if the permit holder requests the revocation.
Marginal note:Notice
(2) Before revoking a permit, the Minister must notify the permit holder of the proposed revocation and the reasons for it.
Marginal note:Manner of notice
(3) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the proposed revocation and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(4) The permit holder may make written representations to the Minister as to why the permit should not be revoked.
Marginal note:Date of revocation
(5) The revocation of a permit is not effective until 20 days after the day on which the Minister notifies the permit holder.

Conditions Under Paragraph 185(1)(c) of the Act

Conditions Relating to Export

Marginal note:Conditions

26 (1) For the purposes of paragraph 185(1)(c) of the Act, the prescribed conditions for the export of hazardous waste or hazardous recyclable material under one or more permits that are held by a permit holder are the following:
- (a) the movement, and the disposal or recycling, of the hazardous waste or hazardous recyclable material must be in accordance with the permit or permits;
- (b) the export must not be prohibited under the laws of Canada;
- (c) the country of destination must be a party to the Convention or the Canada-USA Agreement or must be subject to OECD Decision C(2001)107/FINAL and the import of the hazardous waste or hazardous recyclable material must not be prohibited by that country;
- (d) the conveyance in transit of the hazardous waste or hazardous recyclable material through a country must not be prohibited by that country;
- (e) the hazardous waste or hazardous recyclable material must not be disposed of or recycled south of 60° south latitude;
- (f) biomedical waste set out in item 1 of Schedule 6 or anything that meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations must be disposed of by means of a final disposal operation;
- (g) if anything contains PCBs in a concentration greater than 50 mg per kg, the PCBs in that thing or in any residue from its decontamination must be destroyed or irreversibly transformed;
- (h) the permit holder and all authorized carriers that transport the hazardous waste or hazardous recyclable material in Canada must hold the liability insurance referred to in Division 7 of this Part;
- (i) all of the contracts referred to in paragraphs 20(4)(c) to (e) must be in effect;
- (j) every contract referred to in paragraph 20(4)(c) must
  - (i) describe each type of hazardous waste or hazardous recyclable material that is to be exported under the contract,
  - (ii) set out the quantity of each type of hazardous waste or hazardous recyclable material,
  - (iii) identify the operation set out in column 2 of Part 1 or 2 of Schedule 1 that is to be performed on each type of hazardous waste or hazardous recyclable material,
  - (iv) state that the hazardous waste or hazardous recyclable material is to be exported in accordance with the permit, and
  - (v) require the foreign importer and the facility to take all feasible measures to assist the permit holder to satisfy the conditions under paragraph 185(1)(c) of the Act;
- (k) every contract referred to in paragraphs 20(4)(d) and (e) must
  - (i) describe each type of hazardous waste or hazardous recyclable material that is to be exported under the contract,
  - (ii) set out the quantity of each type of hazardous waste that is to be disposed of, or hazardous recyclable material that is to be recycled, at the authorized facility,
  - (iii) identify the operation set out in column 2 of Part 1 or 2 of Schedule 1 that is to be performed on each type of hazardous waste or hazardous recyclable material at the authorized facility,
  - (iv) state that the hazardous waste is to be disposed of, or the hazardous recyclable material is to be recycled, in accordance with the permit,
  - (v) require the authorized facility to notify the permit holder in writing, within 30 days after the day on which the authorized facility completes an interim or final disposal operation for a type of hazardous waste, or an interim or final recycling operation for a type of hazardous recyclable material, that is recorded as a line entry in the movement document,
    - (A) of the date on which the operation was completed,
    - (B) of the reference number of the movement document, and the line number of the line entry in the movement document, that applies to that type of hazardous waste or hazardous recyclable material, and
    - (C) that the operation was completed in a manner that protects the environment and human health against the adverse effects that may result from the hazardous waste or hazardous recyclable material, and
  - (vi) require the authorized facility to take all feasible measures to assist the permit holder to satisfy the conditions under paragraph 185(1)(c) of the Act;
- (l) every contract referred to in paragraph 20(4)(e) must require the receiving facility to provide the authorized facility that is to dispose of a type of hazardous waste or recycle a type of hazardous recyclable material that was contained in the shipment by means of a final disposal operation or final recycling operation with the reference number of the movement document and the line number of the line entry in the movement document that applies to that type of hazardous waste or hazardous recyclable material;
- (m) each shipment must be recorded in a separate movement document in accordance with sections 27 and 28;
- (n) the movement document completed in accordance with section 28 must be provided, in accordance with that section, to the Minister and the authorities of the province where the facility from which the shipment was shipped is located;
- (o) while they transport the shipment, every authorized carrier must produce the permit or permits, and Parts A and B of the movement document completed in accordance with section 28, when they are required to do so to demonstrate that the movement of the shipment complies with this Division;
- (p) the permit or permits, and Parts A and B of the movement document completed in accordance with section 28, must be provided to a customs office when the hazardous waste or hazardous recyclable material that is contained in the shipment is required to be reported at the customs office under section 95 of the Customs Act;
- (q) if the receiving facility is to dispose of a type of hazardous waste or recycle a type of hazardous recyclable material under the permit or permits by means of an interim disposal operation or interim recycling operation, it must complete the disposal of all of the hazardous waste, or the recycling of all of the hazardous recyclable material, of that type that is contained in a shipment, either within a period of 180 days after the day on which the shipment is delivered to it or within a shorter period required by the authorities of the jurisdiction in which it is located;
- (r) if the receiving facility is to dispose of a type of hazardous waste or recycle a type of hazardous recyclable material under the permit or permits by means of a final disposal operation or final recycling operation, it must complete the disposal of all of the hazardous waste, or the recycling of all of the hazardous recyclable material, of that type that is contained in a shipment, either within a period of one year after the day on which the shipment is delivered to it or within a shorter period required by the authorities of the jurisdiction in which it is located;
- (s) if an authorized facility other than a receiving facility is to dispose of a type of hazardous waste or recycle a type of hazardous recyclable material under the permit or permits by means of a final disposal operation or final recycling operation, it must complete the disposal of all of the hazardous waste, or the recycling of all of the hazardous recyclable material, of that type that was contained in a shipment delivered to the receiving facility and that was sent to the authorized facility by the receiving facility, either within a period of 18 months after the day on which the shipment was delivered to the receiving facility or within a shorter period required by the authorities of the jurisdiction in which the authorized facility is located;
- (t) the Minister must be provided with confirmation of the disposal of the hazardous waste by means of an operation set out in column 2 of Part 1 of Schedule 1, or of the recycling of the hazardous recyclable material by means of an operation set out in column 2 of Part 2 of Schedule 1, in accordance with section 29;
- (u) the documents referred to in section 30 must be kept in accordance with that section;
- (v) if the permit holder is notified that the receiving facility does not accept hazardous waste or hazardous recyclable material that is contained in a shipment that is shipped in accordance with the Act and these Regulations, or that it cannot, or refuses to, dispose of that hazardous waste or recycle that hazardous recyclable material in accordance with the permit,
  - (i) the permit holder must immediately notify the Minister and the foreign importer of the situation and the reason for it,
  - (ii) the permit holder must store the hazardous waste or hazardous recyclable material in a facility that is authorized for that purpose by the authorities of the jurisdiction in which the facility is located,
  - (iii) within 90 days after the day on which the Minister is notified or within any other period of time that is agreed to by the Minister and the competent authority of the country of destination, the permit holder must either
    - (A) make all necessary arrangements to dispose of the hazardous waste by means of a final disposal operation, or to recycle the hazardous recyclable material by means of a final recycling operation, at another authorized facility in the country of destination and provide the Minister with the name and address of, and the name of a contact person for, that authorized facility, the reference number of the movement document and, for each type of hazardous waste or hazardous recyclable material, the line number of the applicable line entry in the movement document, the quantity in kilograms or litres and the applicable disposal or recycling code set out in column 1 of either Part 1 or 2 of Schedule 1, or
    - (B) in accordance with Division 5 of this Part, return the hazardous waste or hazardous recyclable material to Canada under an import permit for the return,
  - (iv) the hazardous waste or hazardous recyclable material must not be transported to an authorized facility referred to in clause (iii)(A) unless the permit holder has received confirmation from the Minister that the competent authority of the country of destination has approved its disposal or recycling at that authorized facility, and
  - (v) if the hazardous waste or hazardous recyclable material is transported to an authorized facility referred to in clause (iii)(A) for disposal or recycling, the authorized facility must complete the disposal of all of the hazardous waste by means of a final disposal operation, or the recycling of all of the hazardous recyclable material by means of a final recycling operation, within one year after the expiry of the period referred to in subparagraph (iii); and
- (w) if a shipment is exported in accordance with the Act and these Regulations but the competent authority of either the country of destination or a country of transit notifies the permit holder that it does not accept hazardous waste or hazardous recyclable material that is contained in the shipment or that hazardous waste or hazardous recyclable material that is contained in the shipment cannot be moved, disposed of or recycled, in accordance with the permit,
  - (i) the permit holder must immediately notify the Minister and the foreign importer of the situation and the reason for it,
  - (ii) if necessary, the permit holder must store the hazardous waste or hazardous recyclable material in a facility that is identified for that purpose by that competent authority,
  - (iii) within 90 days after the day on which the Minister is notified or within any other period of time that is agreed to by the Minister and that competent authority, the permit holder must either
    - (A) make all necessary arrangements to dispose of the hazardous waste by means of a final disposal operation, or to recycle the hazardous recyclable material by means of a final recycling operation, at an authorized facility in the country that is represented by the competent authority and provide the Minister with the name and address of, and the name of a contact person for, that authorized facility, the reference number of the movement document and, for each type of hazardous waste or hazardous recyclable material, the line number of the applicable line entry in the movement document, the quantity in kilograms or litres and the applicable disposal or recycling code set out in column 1 of either Part 1 or 2 of Schedule 1, or
    - (B) in accordance with Division 5 of this Part, return the hazardous waste or hazardous recyclable material to Canada under an import permit for the return,
  - (iv) the hazardous waste or hazardous recyclable material must not be transported to an authorized facility referred to in clause (iii)(A) unless the permit holder has received confirmation from the Minister that the competent authority of the country in which the authorized facility is located has approved its disposal or recycling at that authorized facility, and
  - (v) if the hazardous waste or hazardous recyclable material is transported to an authorized facility referred to in clause (iii)(A) for disposal or recycling, the authorized facility must complete the disposal of all of the hazardous waste by means of a final disposal operation, or the recycling of all of the hazardous recyclable material by means of a final recycling operation, within one year after the expiry of the period referred to in subparagraph (iii).
Marginal note:Delivery to receiving facility
(2) For the purposes of paragraphs (1)(q) to (s), delivery of a shipment to the receiving facility occurs when the shipment arrives at the receiving facility, regardless of whether or when hazardous waste or hazardous recyclable material that is contained in the shipment is accepted by the receiving facility.
Marginal note:Necessary arrangements
(3) The necessary arrangements referred to in clauses (1)(v)(iii)(A) and (w)(iii)(A) must include a requirement that the authorized facility notify the permit holder in writing, within 30 days after the day on which the authorized facility completes a final disposal operation for a type of hazardous waste, or a final recycling operation for a type of hazardous recyclable material, that is recorded as a line entry in the movement document,
- (a) of the date on which the operation was completed;
- (b) of the reference number of the movement document, and the line number of the line entry in the movement document, that applies to that type of hazardous waste or hazardous recyclable material; and
- (c) that the operation was completed in a manner that protects the environment and human health against the adverse effects that may result from the hazardous waste or hazardous recyclable material.

Movement Document

Marginal note:Unit of measure

27 The unit of measure set out in the movement document to describe the quantity of a type of hazardous waste or hazardous recyclable material must be the same as that used in the applicable permit.

Marginal note:Part A

28 (1) Before a shipment that contains hazardous waste or hazardous recyclable material is shipped from a facility under one or more permits, Part A of the movement document must be completed as follows:
- (a) each type of hazardous waste or hazardous recyclable material that is contained in the shipment and that was recorded as a line entry in the notification under subsection 20(3) must be recorded as a line entry;
- (b) each line entry must include the reference number of the notification, the line entry number and the information that was included in the line entry in the notification under subsection 20(4), with the exception of the information referred to in clauses 2(j)(iii)(A), (F) and (L) of Schedule 3;
- (c) the remaining information set out in subitem 1(2) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (d) the individual who provides the information and certification must date and sign Part A.
Marginal note:Part A to Minister and provincial authorities
(2) Within three working days after the day on which the shipment is shipped from the facility, Part A of the movement document must be provided, in the form and manner specified by the Minister, to the Minister and to the authorities of the province where the facility is located, if those authorities ask for it.
Marginal note:Part B
(3) Each authorized carrier that transports the shipment must complete Part B of the movement document — with Part A completed in accordance with subsection (1) — by including the information set out in item 2 of Schedule 10 and a certification that the information provided is accurate and complete. The individual who provides the information and certification must date and sign Part B.
Marginal note:Part C
(4) Immediately after the shipment is delivered to the receiving facility, Part C of the movement document — with Part A completed in accordance with subsection (1) — must be completed as follows:
- (a) the information set out in subitem 3(1) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (b) the individual who provides the information and certification must date and sign Part C.
Marginal note:Parts B and C to Minister and provincial authorities
(5) Within three working days after the day on which the shipment is delivered to the receiving facility, Part B of the movement document completed by each authorized carrier and Part C of the movement document must be provided, in the form and manner specified by the Minister, to the Minister and to the authorities of the province where the facility from which the shipment was shipped is located, if those authorities ask for it.
Marginal note:Amendments to Part C
(6) Part C of the movement document may be amended only with respect to the quantities specified in it. The amendments must be made in the form and manner specified by the Minister and before the confirmation under subsection 29(1) is to be filed with the Minister.
Marginal note:Delivery to receiving facility
(7) For the purposes of subsections (4) and (5), delivery of a shipment to the receiving facility occurs when the shipment arrives at the receiving facility, regardless of whether or when hazardous waste or hazardous recyclable material that is contained in the shipment is accepted by the receiving facility.

Confirmation of Disposal or Recycling

Marginal note:Confirmation

29 (1) Within 30 days after the day on which the disposal by means of an operation set out in column 2 of Part 1 of Schedule 1 of a type of hazardous waste, or the recycling by means of an operation set out in column 2 of Part 2 of Schedule 1 of a type of hazardous recyclable material, that is recorded as a line entry in a movement document is completed, the Minister must be provided with a confirmation, based on the written notice received by the permit holder from the authorized facility that performed the operation, that the operation was completed
- (a) in accordance with the permit or, if applicable, with the arrangements referred to in clause 26(1)(v)(iii)(A) or (w)(iii)(A);
- (b) within the period set out in one of paragraphs 26(1)(q) to (s) or subparagraph 26(1)(v)(v) or (w)(v), as the case may be; and
- (c) in a manner that protects the environment and human health against the adverse effects that may result from the hazardous waste or hazardous recyclable material.
Marginal note:Form and manner of confirmation
(2) The confirmation must be provided in the form and manner specified by the Minister.
Marginal note:Additional information in confirmation
(3) The confirmation
- (a) must identify the reference number of the movement document, the line number of the line entry in the movement document and the disposal or recycling code set out in column 1 of either Part 1 or 2 of Schedule 1 that applies to the type of hazardous waste or hazardous recyclable material and the date on which the operation was completed; and
- (b) must be dated and signed by the individual who provides it and must include that individual’s name and telephone number.

Record Retention

Marginal note:Permit holder

30 (1) The permit holder must keep the following documents that relate to hazardous waste or hazardous recyclable material that is transported under one or more permits at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires:
- (a) all documents that are necessary to demonstrate their compliance with this Division;
- (b) every notice that is referred to in subparagraph 26(1)(k)(v) or subsection 26(3);
- (c) all contracts that relate to the movement, and the disposal or recycling, of the hazardous waste or hazardous recyclable material; and
- (d) all documents that are necessary to demonstrate that they hold the liability insurance referred to in Division 7 of this Part.
Marginal note:Authorized carrier
(2) Each authorized carrier that has a place of business in Canada must keep the following documents that relate to a shipment that contains hazardous waste or hazardous recyclable material that they transported under one or more permits at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires:
- (a) all documents that are necessary to demonstrate that the movement of the shipment complies with this Division; and
- (b) if the authorized carrier transported the shipment in Canada, all documents that are necessary to demonstrate that they hold the liability insurance referred to in Division 7 of this Part.

DIVISION 3Export from and Import to Canada Following Transit Through a Foreign Country

Permit for Export from and Import to Canada Following Transit Through a Foreign Country

Marginal note:Applicant

31 A person may apply for a permit to export hazardous waste or hazardous recyclable material and to import it to Canada after it is conveyed in transit through a foreign country if

(a) they are an individual who is a resident of Canada or a corporation that has its head office, or operates a branch office, in Canada, and they
- (i) are the owner or operator of the facility from which the hazardous waste or hazardous recyclable material is to be shipped, or
- (ii) buy and sell — or are to buy and sell — hazardous recyclable material for recycling and are to export and import such recyclable material for recycling in Canada; or
(b) they are a municipality or Her Majesty in right of Canada or a province.

Marginal note:Form of application

32 (1) An application for a permit must be made to the Minister by means of a notification that is in the form specified by the Minister and that is dated and signed.
Marginal note:Notification
(2) The notification
- (a) may relate to both hazardous waste and hazardous recyclable material;
- (b) may relate to one or more types of hazardous waste or hazardous recyclable material;
- (c) may relate to one or more shipments that contain the hazardous waste or hazardous recyclable material; and
- (d) must involve only
  - (i) one facility in Canada from which the hazardous waste or hazardous recyclable material is to be shipped, and
  - (ii) one receiving facility in Canada to which the hazardous waste or hazardous recyclable material is to be delivered.
Marginal note:Types of hazardous waste or hazardous recyclable material
(3) The hazardous waste or hazardous recyclable material must be categorized into separate types by reference to all of the information set out in subparagraphs 3(i)(i) to (iii) of Schedule 3 and each type for which all of that information is the same must be recorded as a line entry in the notification.
Marginal note:Information in notification
(4) The information set out in subparagraphs 3(i)(i) to (iii) of Schedule 3 must be included in each line entry and the remaining information set out in item 3 of that Schedule must be included in the notification along with a certification, which is dated and signed by the individual who provides the information, that
- (a) the applicant satisfies the conditions set out in section 31;
- (b) the applicant and all authorized carriers that are to transport the hazardous waste or hazardous recyclable material in Canada hold the liability insurance referred to in Division 7 of this Part;
- (c) the applicant will ensure that the hazardous waste or hazardous recyclable material is managed in a manner that protects the environment and human health against the adverse effects that may result from it; and
- (d) the information provided is accurate and complete.
Marginal note:Timing and manner of notification
(5) The notification must be made in the manner specified by the Minister
- (a) within 12 months before the day on which the shipment that contains the hazardous waste or hazardous recyclable material is to be shipped, in the case of a single shipment; and
- (b) within 12 months before the day on which the first shipment is to be shipped, in the case of multiple shipments.

Marginal note:Refusal to issue permit

33 The Minister must refuse to issue a permit if

(a) an authorization referred to in subparagraph 185(1)(b)(i) of the Act is not obtained;
(b) the Minister has reasonable grounds to believe that, if the permit were issued, the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, under the permit would not comply with the Act, these Regulations or conditions to an authorization imposed by the jurisdiction of destination or a country of transit; or
(c) the Minister has reasonable grounds to believe that false or misleading information was provided in the notification under section 32.

Marginal note:Period of validity of permit

34 A permit is valid for the period set out in it, which cannot be longer than

(a) 36 months after the day on which it is issued, in the case of hazardous recyclable material
- (i) that is to be conveyed in transit only through a country that is subject to OECD Decision C(2001)107/FINAL, and
- (ii) that is to be recycled by means of a final recycling operation at a receiving facility that is a pre-consented recovery facility referred to in Case 2 in Chapter II. D (2) of OECD Decision C(2001)107/FINAL, as amended from time to time, to the extent that the amendments are binding on Canada; and
(b) 12 months after the day on which it is issued, in any other case.

Marginal note:New application

35 If a permit needs to be amended the permit holder must apply for a new permit.

Marginal note:Suspension of permit required

36 (1) The Minister must suspend a permit if an authority referred to in subparagraph 185(1)(b)(i) of the Act withdraws an authorization referred to in that subparagraph.
Marginal note:Optional suspension of permit
(2) The Minister may suspend a permit if the Minister has reasonable grounds to believe that
- (a) the permit holder no longer satisfies the conditions set out in section 31;
- (b) the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, under the permit does not comply — or will not comply — with the Act, these Regulations or the conditions of an authorization imposed by the jurisdiction of destination or a country of transit;
- (c) false or misleading information was provided in the notification under section 32;
- (d) as a result of a natural or artificial disaster or another emergency, the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, cannot be in accordance with the permit; or
- (e) the hazardous waste or hazardous recyclable material is not being managed in a manner that will protect the environment and human health against the adverse effects that may result from it.
Marginal note:Notice
(3) The Minister must notify the permit holder of the suspension, the reasons for it and the period during which it applies.
Marginal note:Manner of notice
(4) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the suspension and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(5) The permit holder may make written representations to the Minister as to why the permit should be reinstated within the period of the suspension.
Marginal note:Reinstatement of permit
(6) The Minister may reinstate the permit only if the matter that gave rise to the suspension has been resolved or corrected during the period of the suspension.

Marginal note:Revocation of permit

37 (1) The Minister must revoke a permit if the matter that gave rise to a suspension has not been resolved or corrected within the period of suspension or if the permit holder requests the revocation.
Marginal note:Notice
(2) Before revoking a permit, the Minister must notify the permit holder of the proposed revocation and the reasons for it.
Marginal note:Manner of notice
(3) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the proposed revocation and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(4) The permit holder may make written representations to the Minister as to why the permit should not be revoked.
Marginal note:Date of revocation
(5) The revocation of a permit is not effective until 20 days after the day on which the Minister notifies the permit holder.

Conditions Under Paragraph 185(1)(c) of the Act

Conditions Relating to Export from and Import to Canada Following Transit Through a Foreign Country

Marginal note:Conditions

38 For the purposes of paragraph 185(1)(c) of the Act, the prescribed conditions for the export of hazardous waste or hazardous recyclable material and its import to Canada under one or more permits that are held by a permit holder after it is conveyed in transit through a foreign country are the following:

(a) the movement, and the disposal or recycling, of the hazardous waste or hazardous recyclable material must be in accordance with the permit or permits;
(b) at the time of export,
- (i) the export from and import to Canada must not be prohibited under the laws of Canada, and
- (ii) the conveyance in transit of the hazardous waste or hazardous recyclable material through a country must not be prohibited by that country;
(c) the permit holder and all authorized carriers that transport the hazardous waste or hazardous recyclable material in Canada must hold the liability insurance referred to in Division 7 of this Part;
(d) each shipment that contains hazardous waste or hazardous recyclable material must be recorded in a separate movement document in accordance with sections 39 and 40;
(e) the movement document completed in accordance with section 40 must be provided, in accordance with that section, to the Minister and the authorities of the provinces where the facility from which the shipment was shipped and the receiving facility are located;
(f) while they transport the shipment, every authorized carrier must produce the permit or permits, and Parts A and B of the movement document completed in accordance with section 40, when they are required to do so to demonstrate that the movement of the shipment complies with this Division;
(g) the permit or permits, and Parts A and B of the movement document completed in accordance with section 40, must be provided to a customs office when the hazardous waste or hazardous recyclable material that is contained in the shipment is required to be reported at the customs office under section 12 or 95 of the Customs Act; and
(h) the documents referred to in section 41 must be kept in accordance with that section.

Movement Document

Marginal note:Unit of measure

39 The unit of measure set out in the movement document to describe the quantity of a type of hazardous waste or hazardous recyclable material must be the same as that used in the applicable permit.

Marginal note:Part A

40 (1) Before a shipment that contains hazardous waste or hazardous recyclable material is shipped from a facility under one or more permits, Part A of the movement document must be completed as follows:
- (a) each type of hazardous waste or hazardous recyclable material that is contained in the shipment and that was recorded as a line entry in the notification under subsection 32(3) must be recorded as a line entry;
- (b) each line entry must include the reference number of the notification, the line entry number and the information that was included in the line entry in the notification under subsection 32(4), with the exception of the information referred to in clauses 3(i)(iii)(A), (F) and (L) of Schedule 3;
- (c) the remaining information set out in subitem 1(3) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (d) the individual who provides the information and certification must date and sign Part A.
Marginal note:Part A to Minister and provincial authorities
(2) Within three working days after the day on which the shipment is shipped from the facility, Part A of the movement document must be provided, in the form and manner specified by the Minister to the Minister and to the authorities of the provinces where the facility and the receiving facility are located, if those authorities ask for it.
Marginal note:Part B
(3) Each authorized carrier that transports the shipment must complete Part B of the movement document — with Part A completed in accordance with subsection (1) — by including the information set out in item 2 of Schedule 10 and a certification that the information provided is accurate and complete. The individual who provides the information and certification must date and sign Part B.
Marginal note:Part C
(4) Immediately after the shipment is delivered to the receiving facility, Part C of the movement document — with Part A completed in accordance with subsection (1) — must be completed as follows:
- (a) the information set out in subitem 3(1) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (b) the individual who provides the information and certification must date and sign Part C.
Marginal note:Parts B and C to Minister and provincial authorities
(5) Within three working days after the day on which the shipment is delivered to the receiving facility, Part B of the movement document completed by each authorized carrier and Part C of the movement document must be provided, in the form and manner specified by the Minister, to the Minister and to the authorities of the provinces where the facility from which the shipment was shipped and the receiving facility are located, if those authorities ask for it.
Marginal note:Delivery to receiving facility
(6) For the purposes of subsections (4) and (5), delivery of a shipment to a receiving facility occurs when the shipment arrives at the receiving facility, regardless of whether or when hazardous waste or hazardous recyclable material that is contained in the shipment is accepted by the receiving facility.

Record Retention

Marginal note:Permit holder

41 (1) The permit holder must keep the following documents that relate to hazardous waste or hazardous recyclable material that is transported under one or more permits at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires:
- (a) all documents that are necessary to demonstrate their compliance with this Division; and
- (b) all documents that are necessary to demonstrate that they hold the liability insurance referred to in Division 7 of this Part.
Marginal note:Authorized carrier
(2) Each authorized carrier that has a place of business in Canada must keep the following documents that relate to a shipment that contains hazardous waste or hazardous recyclable material that they transported under one or more permits at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires:
- (a) all documents that are necessary to demonstrate that the movement of the shipment complies with this Division; and
- (b) if the authorized carrier transported the shipment in Canada, all documents that are necessary to demonstrate that they hold the liability insurance referred to in Division 7 of this Part.

DIVISION 4Transit Through Canada

Permit for Transit Through Canada

Marginal note:Application

42 (1) An application for a permit to convey hazardous waste or hazardous recyclable material in transit through Canada may be made by any person and must be made to the Minister by means of a notification that is in the form specified by the Minister and that is dated and signed.
Marginal note:Notification
(2) The notification
- (a) may relate to both hazardous waste and hazardous recyclable material;
- (b) may relate to one or more types of hazardous waste or hazardous recyclable material;
- (c) may relate to one or more shipments that contain the hazardous waste or hazardous recyclable material; and
- (d) must involve only
  - (i) one foreign exporter,
  - (ii) one foreign importer,
  - (iii) one facility in the country of origin from which the hazardous waste or hazardous recyclable material is to be shipped, and
  - (iv) one receiving facility in the country of destination to which the hazardous waste or hazardous recyclable material is to be delivered.
Marginal note:Types of hazardous waste or hazardous recyclable material
(3) The hazardous waste or hazardous recyclable material must be categorized into separate types by reference to all of the information set out in subparagraphs 4(i)(i) to (iii) of Schedule 3 and each type for which all of that information is the same must be recorded as a line entry in the notification.
Marginal note:Information in notification
(4) The information set out in subparagraphs 4(i)(i) to (iii) of Schedule 3 must be included in each line entry and the remaining information set out in item 4 of that Schedule must be included in the notification along with a certification, which is dated and signed by the individual who provides the information, that
- (a) all authorized carriers that are to transport the hazardous waste or hazardous recyclable material in Canada hold the liability insurance referred to in Division 7 of this Part;
- (b) the applicant will ensure that the hazardous waste or hazardous recyclable material is managed in a manner that protects the environment and human health against the adverse effects that may result from it; and
- (c) the information provided is accurate and complete.
Marginal note:Timing and manner of notification
(5) The notification must be made in the manner specified by the Minister
- (a) within 12 months before the day on which the shipment that contains the hazardous waste or hazardous recyclable material is to be shipped, in the case of a single shipment; and
- (b) within 12 months before the day on which the first shipment is to be shipped, in the case of multiple shipments.

Marginal note:Refusal to issue permit

43 The Minister must refuse to issue a permit if the Minister has reasonable grounds to believe that

(a) if the permit were issued, the transportation of hazardous waste or hazardous recyclable material under the permit would not comply with the Act or these Regulations; or
(b) false or misleading information was provided in the notification under section 42.

Marginal note:Period of validity of permit

44 A permit is valid for the period set out in it, which cannot be longer than

(a) 36 months after the day on which it is issued, in the case of hazardous recyclable material, if
- (i) the country of origin is subject to OECD Decision C(2001)107/FINAL and, if applicable, the hazardous recyclable material is to be conveyed in transit only through a country that is subject to that Decision, and
- (ii) the hazardous recyclable material is to be recycled by means of a final recycling operation at a receiving facility that is a pre-consented recovery facility referred to in Case 2 in Chapter II. D (2) of OECD Decision C(2001)107/FINAL, as amended from time to time, to the extent that the amendments are binding on Canada; and
(b) 12 months after the day on which it is issued, in any other case.

Marginal note:New application

45 If a permit needs to be amended the permit holder must apply for a new permit.

Marginal note:Suspension of permit required

46 (1) The Minister must suspend a permit when, or at any time after, a shipment enters Canada under the permit if
- (a) the Minister becomes aware that the competent authority of the country of destination or of a country through which the hazardous waste or hazardous recyclable material is to be conveyed in transit after it has left Canada has not authorized the import or conveyance in transit, as the case may be; or
- (b) the competent authority of one of those countries withdraws its authorization.
Marginal note:Optional suspension of permit
(2) The Minister may suspend a permit if the Minister has reasonable grounds to believe that
- (a) false or misleading information was provided in the notification under section 42;
- (b) the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, under the permit will not comply with the Act, these Regulations or the conditions of an authorization imposed by the jurisdiction of destination or a country of transit;
- (c) the transportation of hazardous waste or hazardous recyclable material under the permit does not comply with the Act or these Regulations;
- (d) as a result of a natural or artificial disaster or another emergency, the transportation of hazardous waste or hazardous recyclable material cannot be in accordance with the permit; or
- (e) the hazardous waste or hazardous recyclable material is not being managed in a manner that will protect the environment and human health against the adverse effects that may result from it.
Marginal note:Notice
(3) The Minister must notify the permit holder of the suspension, the reasons for it and the period during which it applies.
Marginal note:Manner of notice
(4) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the suspension and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(5) The permit holder may make written representations to the Minister as to why the permit should be reinstated within the period of the suspension.
Marginal note:Reinstatement of permit
(6) The Minister may reinstate the permit only if the matter that gave rise to the suspension has been resolved or corrected during the period of the suspension.

Marginal note:Revocation of permit

47 (1) The Minister must revoke a permit if the matter that gave rise to a suspension has not been resolved or corrected within the period of suspension or if the permit holder requests the revocation.
Marginal note:Notice
(2) Before revoking a permit, the Minister must notify the permit holder of the proposed revocation and the reasons for it.
Marginal note:Manner of notice
(3) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the proposed revocation and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(4) The permit holder may make written representations to the Minister as to why the permit should not be revoked.
Marginal note:Date of revocation
(5) The revocation of a permit is not effective until 20 days after the day on which the Minister notifies the permit holder.

Conditions Under Paragraph 185(1)(c) of the Act

Conditions Relating to Transit Through Canada

Marginal note:Conditions

48 For the purposes of paragraph 185(1)(c) of the Act, the prescribed conditions for the conveyance of hazardous waste or hazardous recyclable material in transit through Canada under one or more permits that are held by a permit holder are the following:

(a) the transportation of the hazardous waste or hazardous recyclable material must be in accordance with the permit or permits;
(b) at the time the shipment that contains the hazardous waste or hazardous recyclable material enters Canada, the conveyance in transit of the hazardous waste or hazardous recyclable material through Canada must not be prohibited under the laws of Canada;
(c) at the time the shipment enters Canada, the competent authority of the country of destination and of every country through which the hazardous waste or hazardous recyclable material is to be conveyed in transit after it has left Canada must have authorized the import or conveyance in transit, as the case may be;
(d) all authorized carriers that transport the hazardous waste or hazardous recyclable material in Canada must hold the liability insurance referred to in Division 7 of this Part;
(e) each shipment must be recorded in a separate movement document in accordance with sections 49 and 50;
(f) the movement document completed in accordance with section 50 must be provided to the Minister in accordance with that section;
(g) while they transport the shipment in Canada, every authorized carrier must produce the permit or permits, and Parts A and B of the movement document completed in accordance with section 50, when they are required to do so to demonstrate that the movement of the shipment complies with this Division;
(h) the permit or permits, and Parts A and B of the movement document completed in accordance with section 50, must be provided to a customs office when the hazardous waste or hazardous recyclable material that is contained in the shipment is required to be reported at the customs office under section 12 or 95 of the Customs Act; and
(i) the documents referred to in section 51 must be kept in accordance with that section.

Movement Document

Marginal note:Unit of measure

49 The unit of measure set out in the movement document to describe the quantity of a type of hazardous waste or hazardous recyclable material must be the same as that used in the applicable permit.

Marginal note:Part A

50 (1) Before a shipment that contains hazardous waste or hazardous recyclable material enters Canada under one or more permits, Part A of the movement document must be completed as follows:
- (a) the information set out in subitem 1(4) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (b) the individual who provides the information and certification must date and sign Part A.
Marginal note:Part B
(2) Each authorized carrier that transports the shipment in Canada must complete Part B of the movement document — with Part A completed in accordance with subsection (1) — by including the information set out in item 2 of Schedule 10 and a certification that the information provided is accurate and complete. The individual who provides the information and certification must date and sign Part B.
Marginal note:Parts A and B to Minister
(3) Each authorized carrier that transports the shipment in Canada must provide the movement document — of which Parts A and B are completed in accordance with subsection (1) and (2) — to the Minister, in the form and manner specified by the Minister, within three working days after the shipment leaves Canada.

Record Retention

Marginal note:Permit holder

51 (1) A permit holder that has a place of business in Canada must keep all documents that relate to hazardous waste or hazardous recyclable material transported under one or more permits and that are necessary to demonstrate their compliance with this Division at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires.
Marginal note:Authorized carrier
(2) Each authorized carrier that has a place of business in Canada must keep the following documents that relate to a shipment that contains hazardous waste or hazardous recyclable material that they transported in Canada under one or more permits at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires:
- (a) all documents that are necessary to demonstrate that the movement of the shipment complies with this Division; and
- (b) all documents that are necessary to demonstrate that they hold the liability insurance referred to in Division 7 of this Part.

DIVISION 5Return to Canada

Permit for Return to Canada

Marginal note:When holder of export permit or permits must apply

52 (1) In the circumstances set out in clauses 26(1)(v)(iii)(B) and (w)(iii)(B), the holder of the export permit or permits must apply for an import permit to return to Canada hazardous waste or hazardous recyclable material that was exported from Canada.
Marginal note:Other cases
(2) In any other case, a person in Canada may apply for an import permit to return to Canada hazardous waste or hazardous recyclable material that was exported from Canada.

Marginal note:Form of application

53 (1) An application for a permit must be made to the Minister by means of a notification that is in the form specified by the Minister and that is dated and signed.
Marginal note:Notification
(2) The notification
- (a) may relate to one or more types of hazardous waste or hazardous recyclable material that were exported from Canada; and
- (b) must involve only one shipment for the return.
Marginal note:Types of hazardous waste or hazardous recyclable material
(3) The hazardous waste or hazardous recyclable material must be categorized into separate types by reference to all of the information set out in subparagraphs 5(j)(i) to (iii) of Schedule 3 and each type for which all of that information is the same must be recorded as a line entry in the notification.
Marginal note:Information in notification
(4) The information set out in subparagraphs 5(j)(i) to (iii) of Schedule 3 must be included in each line entry and the remaining information set out in item 5 of that Schedule must be included in the notification along with a certification, which is dated and signed by the individual who provides the information, that
- (a) the applicant will ensure that the hazardous waste or hazardous recyclable material is managed in a manner that protects the environment and human health against the adverse effects that may result from it; and
- (b) the information provided is accurate and complete.
Marginal note:Manner of notification
(5) The notification must be made in the manner specified by the Minister.

Marginal note:Refusal to issue permit

54 The Minister must refuse to issue a permit if

(a) an authorization referred to in subparagraph 185(1)(b)(i) of the Act is not obtained from a country of transit, unless the circumstances in subsection 185(4) of the Act apply;
(b) the Minister has reasonable grounds to believe that, if the permit were issued, the movement of hazardous waste or hazardous recyclable material under the permit would not comply with the Act, these Regulations or conditions to an authorization imposed by a country of transit; or
(c) the Minister has reasonable grounds to believe that false or misleading information was provided in the notification under section 53.

Marginal note:Period of validity of permit

55 A permit is valid for the period set out in it, which cannot be longer than 12 months after the day on which it is issued.

Marginal note:New application

56 If a permit needs to be amended the permit holder must apply for a new permit.

Marginal note:Suspension of permit required

57 (1) The Minister must suspend a permit if an authority of a country of transit withdraws an authorization referred to in subparagraph 185(1)(b)(i) of the Act.
Marginal note:Optional suspension of permit
(2) The Minister may suspend a permit if the Minister has reasonable grounds to believe that
- (a) false or misleading information was provided in the notification under section 53;
- (b) the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, under the permit will not comply with the Act, these Regulations or the conditions of an authorization imposed by the jurisdiction of destination or a country of transit;
- (c) the movement of hazardous waste or hazardous recyclable material under the permit does not comply with the Act, these Regulations or conditions to an authorization imposed by a country of transit;
- (d) as a result of a natural or artificial disaster or another emergency, the movement of hazardous waste or hazardous recyclable material cannot be in accordance with the permit; or
- (e) the hazardous waste or hazardous recyclable material is not being managed in a manner that will protect the environment and human health against the adverse effects that may result from it.
Marginal note:Notice
(3) The Minister must notify the permit holder of the suspension, the reasons for it and the period during which it applies.
Marginal note:Manner of notice
(4) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the suspension and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(5) The permit holder may make written representations to the Minister as to why the permit should be reinstated within the period of the suspension.
Marginal note:Reinstatement of permit
(6) The Minister may reinstate the permit only if the matter that gave rise to the suspension has been resolved or corrected during the period of the suspension.

Marginal note:Revocation of permit

58 (1) The Minister must revoke a permit if the matter that gave rise to a suspension has not been resolved or corrected within the period of suspension.
Marginal note:Notice
(2) Before revoking a permit, the Minister must notify the permit holder of the proposed revocation and the reasons for it.
Marginal note:Manner of notice
(3) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the proposed revocation and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(4) The permit holder may make written representations to the Minister as to why the permit should not be revoked.
Marginal note:Date of revocation
(5) The revocation of a permit is not effective until 20 days after the day on which the Minister notifies the permit holder.

Conditions Under Paragraph 185(1)(c) of the Act

Conditions Relating to Return to Canada

Marginal note:Conditions

59 For the purposes of paragraph 185(1)(c) of the Act, the prescribed conditions for the return of hazardous waste or hazardous recyclable material to Canada under one or more permits that are held by a permit holder are the following:

(a) the movement of the hazardous waste or hazardous recyclable material must be in accordance with the permit or permits;
(b) the conveyance in transit of the hazardous waste or hazardous recyclable material through a country must not be prohibited by that country;
(c) the shipment that contains the hazardous waste or hazardous recyclable material must be recorded in a movement document in accordance with sections 60 and 61;
(d) the movement document completed in accordance with section 61 must be provided, in accordance with that section, to the Minister and the authorities of the province where the facility to which the shipment is to be delivered is located;
(e) while they transport the shipment, every authorized carrier must produce the permit or permits, and Parts A and B of the movement document completed in accordance with section 61, when they are required to do so to demonstrate that the movement of the shipment complies with this Division;
(f) the permit or permits, and Parts A and B of the movement document completed in accordance with section 61, must be provided to a customs office when the hazardous waste or hazardous recyclable material that is contained in the shipment is required to be reported at the customs office under section 12 of the Customs Act;
(g) the shipment must be delivered to the facility in Canada from which the hazardous waste or hazardous recyclable material was originally shipped unless another facility in Canada is identified in the permit or permits, in which case the shipment must be delivered to that facility; and
(h) the documents referred to in section 62 must be kept in accordance with that section.

Movement Document

Marginal note:Unit of measure

60 The unit of measure set out in the movement document to describe the quantity of a type of hazardous waste or hazardous recyclable material must be the same as that used in the applicable permit.

Marginal note:Part A

61 (1) Before a shipment that contains hazardous waste or hazardous recyclable material is shipped from a facility under one or more permits, Part A of the movement document must be completed as follows:
- (a) each type of hazardous waste or hazardous recyclable material that is contained in the shipment and that was recorded as a line entry in the notification under subsection 53(3) must be recorded as a line entry;
- (b) each line entry must include the reference number of the notification, the line entry number and the information that was included in the line entry in the notification under subsection 53(4) — with the exception of the information referred to in clauses 5(j)(iii)(A), (E) and (K) of Schedule 3;
- (c) the remaining information set out in subitem 1(5) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (d) the individual who provides the information and certification must date and sign Part A.
Marginal note:Part A to Minister and provincial authorities
(2) Within three working days after the day on which the shipment is shipped from the facility, Part A of the movement document must be provided, in the form and manner specified by the Minister, to the Minister and to the authorities of the province where the facility to which the shipment is to be delivered is located, if those authorities ask for it.
Marginal note:Part B
(3) Each authorized carrier that transports the shipment must complete Part B of the movement document — with Part A completed in accordance with subsection (1) — by including the information set out in item 2 of Schedule 10 and a certification that the information provided is accurate and complete. The individual who provides the information and certification must date and sign Part B.
Marginal note:Part C
(4) Immediately after the shipment is delivered to the facility to which the shipment is shipped under the permit or permits, Part C of the movement document — with Part A completed in accordance with subsection (1) — must be completed as follows:
- (a) the information set out in subitem 3(2) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (b) the individual who provides the information and certification must date and sign Part C.
Marginal note:Parts B and C to Minister and provincial authorities
(5) Within three working days after the day on which the shipment is delivered to the facility, Part B of the movement document completed by each authorized carrier and Part C of the movement document must be provided, in the form and manner specified by the Minister, to the Minister and to the authorities of the province where the facility is located, if those authorities ask for it.
Marginal note:Amendments to Part C
(6) Part C of the movement document may be amended only with respect to the quantities specified in it. The amendments must be made in the form and manner specified by the Minister and within 180 days after the day on which the shipment is delivered to the facility.
Marginal note:Delivery to facility
(7) For the purposes of subsections (4) to (6), delivery of a shipment to a facility occurs when the shipment arrives at the facility, regardless of when the facility acknowledges receipt of the shipment.

Record Retention

Marginal note:Permit holder

62 (1) The permit holder must keep all documents that relate to hazardous waste or hazardous recyclable material transported under one or more permits and that are necessary to demonstrate their compliance with this Division at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires.
Marginal note:Authorized carrier
(2) Each authorized carrier that has a place of business in Canada must keep the following documents that relate to a shipment that contains hazardous waste or hazardous recyclable material that they transported under one or more permits at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires:
- (a) all documents that are necessary to demonstrate that the movement of the shipment complies with this Division; and
- (b) if the authorized carrier transported the shipment in Canada, all documents that are necessary to demonstrate that they hold the liability insurance referred to in Division 7 of this Part.

DIVISION 6Return to Foreign Country of Origin

Permit for Return to Foreign Country of Origin

Marginal note:When holder of import permit or permits must apply

63 (1) In the circumstances set out in clauses 14(1)(u)(iii)(B) and (v)(iii)(B), the holder of the import permit or permits must apply for an export permit to return to the country of origin hazardous waste or hazardous recyclable material that was imported to Canada.
Marginal note:Other cases
(2) In any other case, a person in Canada may apply for an export permit to return to the country of origin hazardous waste or hazardous recyclable material that was imported to Canada.

Marginal note:Form of application

64 (1) An application for a permit must be made to the Minister by means of a notification that is in the form specified by the Minister and that is dated and signed.
Marginal note:Notification
(2) The notification
- (a) may relate to one or more types of hazardous waste or hazardous recyclable material that were imported to Canada; and
- (b) must involve only one shipment for the return.
Marginal note:Types of hazardous waste or hazardous recyclable material
(3) The hazardous waste or hazardous recyclable material must be categorized into separate types by reference to all of the information set out in subparagraphs 6(j)(i) to (iii) of Schedule 3 and each type for which all of that information is the same must be recorded as a line entry in the notification.
Marginal note:Information in notification
(4) The information set out in subparagraphs 6(j)(i) to (iii) of Schedule 3 must be included in each line entry and the remaining information set out in item 6 of that Schedule must be included in the notification along with a certification, which is dated and signed by the individual who provides the information, that
- (a) the applicant will ensure that the hazardous waste or hazardous recyclable material is managed in a manner that protects the environment and human health against the adverse effects that may result from it; and
- (b) the information provided is accurate and complete.
Marginal note:Manner of notification
(5) The notification must be made in the manner specified by the Minister.

Marginal note:Refusal to issue permit

65 The Minister must refuse to issue a permit if

(a) an authorization referred to in subparagraph 185(1)(b)(i) of the Act is not obtained from a country of transit, unless the circumstances in subsection 185(4) of the Act apply;
(b) the Minister has reasonable grounds to believe that, if the permit were issued, the movement of hazardous waste or hazardous recyclable material under the permit would not comply with the Act, these Regulations or conditions to an authorization imposed by a country of transit; or
(c) the Minister has reasonable grounds to believe that false or misleading information was provided in the notification under section 64.

Marginal note:Period of validity of permit

66 A permit is valid for the period set out in it, which cannot be longer than 12 months after the day on which it is issued.

Marginal note:New application

67 If a permit needs to be amended the permit holder must apply for a new permit.

Marginal note:Suspension of permit required

68 (1) The Minister must suspend a permit if an authority of a country of transit withdraws an authorization referred to in subparagraph 185(1)(b)(i) of the Act.
Marginal note:Optional suspension of permit
(2) The Minister may suspend a permit if the Minister has reasonable grounds to believe that
- (a) false or misleading information was provided in the notification under section 64;
- (b) the movement of hazardous waste or hazardous recyclable material, or the disposal of hazardous waste or recycling of hazardous recyclable material, under the permit will not comply with the Act, these Regulations or the conditions of an authorization imposed by the jurisdiction of destination or a country of transit;
- (c) the movement of hazardous waste or hazardous recyclable material under the permit does not comply with the Act, these Regulations or conditions to an authorization imposed by a country of transit;
- (d) as a result of a natural or artificial disaster or another emergency, the movement of hazardous waste or hazardous recyclable material cannot be in accordance with the permit; or
- (e) the hazardous waste or hazardous recyclable material is not being managed in a manner that will protect the environment and human health against the adverse effects that may result from it.
Marginal note:Notice
(3) The Minister must notify the permit holder of the suspension, the reasons for it and the period during which it applies.
Marginal note:Manner of notice
(4) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the suspension and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(5) The permit holder may make written representations to the Minister as to why the permit should be reinstated within the period of the suspension.
Marginal note:Reinstatement of permit
(6) The Minister may reinstate the permit only if the matter that gave rise to the suspension has been resolved or corrected during the period of the suspension.

Marginal note:Revocation of permit

69 (1) The Minister must revoke a permit if the matter that gave rise to a suspension has not been resolved or corrected within the period of suspension.
Marginal note:Notice
(2) Before revoking a permit, the Minister must notify the permit holder of the proposed revocation and the reasons for it.
Marginal note:Manner of notice
(3) The Minister notifies the permit holder when the Minister
- (a) informs the permit holder at their last known address or email address that the notice of the proposed revocation and the reasons for it are available through a generally accessible electronic source and identifies the location of the notice and reasons; or
- (b) sends the notice and reasons to the permit holder’s last known address or email address.
Marginal note:Representations
(4) The permit holder may make written representations to the Minister as to why the permit should not be revoked.
Marginal note:Date of revocation
(5) The revocation of a permit is not effective until 20 days after the day on which the Minister notifies the permit holder.

Conditions Under Paragraph 185(1)(c) of the Act

Conditions Relating to Return to Foreign Country of Origin

Marginal note:Conditions

70 For the purposes of paragraph 185(1)(c) of the Act, the prescribed conditions for the return of hazardous waste or hazardous recyclable material to the country of origin under one or more permits that are held by a permit holder are the following:

(a) the movement of the hazardous waste or hazardous recyclable material must be in accordance with the permit or permits;
(b) the conveyance in transit of the hazardous waste or hazardous recyclable material through a country must not be prohibited by that country;
(c) the shipment that contains the hazardous waste or hazardous recyclable material must be recorded in a movement document in accordance with sections 71 and 72;
(d) the movement document completed in accordance with section 72 must be provided, in accordance with that section, to the Minister and the authorities of the province where the facility from which the shipment is shipped is located;
(e) while they transport the shipment, every authorized carrier must produce the permit or permits, and Parts A and B of the movement document completed in accordance with section 72, when they are required to do so to demonstrate that the movement of the shipment complies with this Division;
(f) the permit or permits, and Parts A and B of the movement document completed in accordance with section 72, must be provided to a customs office when the hazardous waste or hazardous recyclable material that is contained in the shipment is required to be reported at the customs office under section 95 of the Customs Act;
(g) the shipment must be delivered to the facility in the country of origin from which the hazardous waste or hazardous recyclable material was originally shipped unless another facility in the country of origin is identified in the permit or permits, in which case the shipment must be delivered to that facility; and
(h) the documents referred to in section 73 must be kept in accordance with that section.

Movement Document

Marginal note:Unit of measure

71 The unit of measure set out in the movement document to describe the quantity of a type of hazardous waste or hazardous recyclable material must be the same as that used in the applicable permit.

Marginal note:Part A

72 (1) Before a shipment that contains hazardous waste or hazardous recyclable material is shipped from a facility under one or more permits, Part A of the movement document must be completed as follows:
- (a) each type of hazardous waste or hazardous recyclable material that is contained in the shipment and that was recorded as a line entry in the notification under subsection 64(3) must be recorded as a line entry;
- (b) each line entry must include the reference number of the notification, the line entry number and the information that was included in the line entry in the notification under subsection 64(4), with the exception of the information referred to in clauses 6(j)(iii)(A), (E) and (K) of Schedule 3;
- (c) the remaining information set out in subitem 1(6) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (d) the individual who provides the information and certification must date and sign Part A.
Marginal note:Part A to Minister and provincial authorities
(2) Within three working days after the day on which the shipment is shipped from the facility, Part A of the movement document must be provided, in the form and manner specified by the Minister, to the Minister and to the authorities of the province where the facility is located, if those authorities ask for it.
Marginal note:Part B
(3) Each authorized carrier that transports the shipment must complete Part B of the movement document — with Part A completed in accordance with subsection (1) — by including the information set out in item 2 of Schedule 10 and a certification that the information provided is accurate and complete. The individual who provides the information and certification must date and sign Part B.
Marginal note:Part C
(4) Immediately after the shipment is delivered to the facility to which the shipment is shipped under the permit or permits, Part C of the movement document — with Part A completed in accordance with subsection (1) — must be completed as follows:
- (a) the information set out in subitem 3(2) of Schedule 10 and a certification that the information provided is accurate and complete must be included; and
- (b) the individual who provides the information and certification must date and sign Part C.
Marginal note:Parts B and C to Minister and provincial authorities
(5) Within three working days after the day on which the shipment is delivered to the facility, Part B of the movement document completed by each authorized carrier and Part C of the movement document must be provided, in the form and manner specified by the Minister, to the Minister and to the authorities of the province where the facility from which the shipment was shipped is located, if those authorities ask for it.
Marginal note:Amendments to Part C
(6) Part C of the movement document may be amended only with respect to the quantities specified in it. The amendments must be made in the form and manner specified by the Minister and within 180 days after the day on which the shipment is delivered to the facility.
Marginal note:Delivery to facility
(7) For the purposes of subsections (4) to (6), delivery of a shipment to a facility occurs when the shipment arrives at the facility, regardless of when the facility acknowledges receipt of the shipment.

Record Retention

Marginal note:Permit holder

73 (1) The permit holder must keep all documents that relate to hazardous waste or hazardous recyclable material transported under one or more permits and that are necessary to demonstrate their compliance with this Division at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires.
Marginal note:Authorized carrier
(2) Each authorized carrier that has a place of business in Canada must keep the following documents that relate to a shipment that contains hazardous waste or hazardous recyclable material that they transported under one or more permits at their principal place of business in Canada for a period of five years after the latest day on which any of the permits expires:
- (a) all documents that are necessary to demonstrate that the movement of the shipment complies with this Division; and
- (b) if the authorized carrier transported the shipment in Canada, all documents that are necessary to demonstrate that they hold the liability insurance referred to in Division 7 of this Part.

DIVISION 7Liability Insurance

Marginal note:Non-application to the Crown

74 This Division does not apply to Her Majesty in right of Canada or a province.

Marginal note:Amount of insurance — permit holder

75 (1) The amount of liability insurance to be held by a permit holder referred to in any of Divisions 1 to 3, 5 and 6 of this Part is
- (a) at least $5,000,000 in respect of a shipment that contains hazardous waste; and
- (b) at least $1,000,000 in respect of a shipment that contains hazardous recyclable material.
Marginal note:Amount of insurance — authorized carrier
(2) The amount of liability insurance to be held by an authorized carrier that transports a shipment that contains hazardous waste or hazardous recyclable material in Canada is the amount required under federal or provincial legislation that applies to it in respect of the transport of that shipment.

Marginal note:Coverage

76 The liability insurance to be held by a permit holder must be in respect of

(a) damages to third parties for which the permit holder is responsible; and
(b) costs imposed by law on the permit holder to clean up the environment in respect of any hazardous waste or hazardous recyclable material that is released.

Marginal note:Period of coverage

77 The insurance must cover liability that arises

(a) for a permit holder that imports a shipment under Division 1 of this Part, from the time that the shipment enters Canada until all of the hazardous waste or hazardous recyclable material that is contained in the shipment is accepted by the receiving facility, or, in the circumstances set out in paragraph 14(1)(u) or (v), until it either is accepted by an authorized facility in Canada that is to perform the final disposal operation or final recycling operation or is shipped from a facility in Canada for return under Division 6 of this Part;
(b) for a permit holder that exports a shipment under Division 2 of this Part, from the time that the shipment is shipped from a facility in Canada until all of the hazardous waste or hazardous recyclable material that is contained in the shipment is accepted by the receiving facility or
- (i) in the circumstances set out in paragraph 26(1)(v), until it either is accepted by an authorized facility in the country of destination that is to perform the final disposal operation or final recycling operation or is shipped under Division 5 of this Part from a facility for return to Canada, or
- (ii) in the circumstances set out in paragraph 26(1)(w), until it either is accepted by an authorized facility that is located in the applicable country of destination or transit and that is to perform the final disposal operation or final recycling operation or is shipped under Division 5 of this Part from a facility for return to Canada;
(c) for a permit holder that, under Division 3 of this Part, exports a shipment and imports it to Canada after it is conveyed in transit through a foreign country, from the time that the shipment is shipped from a facility in Canada until all of the hazardous waste or hazardous recyclable material that is contained in the shipment is accepted by an authorized facility in Canada;
(d) for a permit holder that imports a shipment for return to Canada under Division 5 of this Part, from the time that the shipment is shipped from a facility in the foreign country until it arrives at the facility in Canada to which it is shipped under that Division;
(e) for a permit holder that exports a shipment for return to a foreign country of origin under Division 6 of this Part, from the time that the shipment is shipped from a facility in Canada until it leaves Canada; and
(f) for an authorized carrier, for the duration of the transportation in Canada.

DIVISION 8Export Reduction Plans

Marginal note:Content of plan

78 (1) The plan referred to in subsection 188(1) of the Act must contain
- (a) for each type of hazardous waste to which the plan applies,
  - (i) the applicable UN number set out in column 1 of Schedule 1 to the Transportation of Dangerous Goods Regulations or, if no UN number applies to it under those Regulations, the abbreviation “n/a”,
  - (ii) the applicable class set out in column 3 of Schedule 1 to the Transportation of Dangerous Goods Regulations, and
  - (iii) the following codes:
    - (A) the applicable codes set out in column 1 of Part 1 of Schedule 11,
    - (B) the disposal code set out in column 1 of Part 1 of Schedule 1 for the applicable operation set out in column 2 of that Part to be performed at the receiving facility,
    - (C) the letter L when the hazardous waste is a liquid, the letter P when it is a sludge, the letter S when it is a solid and the letter G when it is a gas, followed in each case by the applicable code set out in column 1 of Part 2 of Schedule 11,
    - (D) the applicable codes set out in column 1 of Part 3 of Schedule 11,
    - (E) the applicable codes set out in column 1 of Part 4 of Schedule 11,
    - (F) the applicable code set out in column 1 of Part 5 of Schedule 11,
    - (G) the applicable codes set out in Annex I or II to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (H) the applicable code, if any, set out in List A of Annex VIII to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (I) in the case of hazardous waste that is set out in column 2 of Schedule 6 or 12 or column 3 of Schedule 8 or that contains a substance that is set out in column 3 of Schedule 7, the applicable codes, if any, set out in column 1 of the applicable Schedule,
    - (J) in the case of hazardous waste that produces a leachate that contains one or more environmentally hazardous constituents, the applicable codes, if any, set out in column 1 of Schedule 2 for each environmentally hazardous constituent, and
    - (K) the applicable code, if any, set out in column 1 of Schedule 5 for every persistent organic pollutant that is contained in the hazardous waste;
- (b) if the exporter generates the hazardous waste referred to in the plan, the name and description of the process that generates the hazardous waste and of the activity in which that process is used;
- (c) the origin of the hazardous waste if the exporter does not generate it;
- (d) the quantity of hazardous waste exported at the start of the implementation of the plan and the quantity of export reduction to be achieved at each stage of the plan;
- (e) a description of how the exporter will reduce or phase out exports of the hazardous waste referred to in the plan;
- (f) the options considered for reducing or phasing out exports of the hazardous waste referred to in the plan, including options for disposing of it in Canada;
- (g) the stages of the plan and a schedule for completing each stage; and
- (h) for each stage of the plan, an estimate of the quantity, in kilograms or litres, of goods produced that generate the hazardous waste referred to in the plan and a description of the impact of any changes to the quantity produced on the reduction or phasing out of exports of that hazardous waste.
Marginal note:Retention of plan
(2) A person who submits a plan to the Minister must keep a copy of the plan at their principal place of business in Canada for a period of five years after the day on which the last stage of the plan is completed.

PART 2Movement Within Canada

Conditions Relating to Movement Within Canada

Marginal note:Conditions

79 For the purposes of subsection 189(1) of the Act, the movement by a person of hazardous waste or hazardous recyclable material within Canada is subject to the following conditions:

(a) the shipment that contains the hazardous waste or hazardous recyclable material must be shipped by a consignor to a site that is owned, operated or otherwise controlled by a consignee;
(b) the shipment must be recorded in a movement document in accordance with section 80;
(c) the movement document completed in accordance with section 80 must be provided, in accordance with that section, to the consignor and to the authorities of the provinces from which the shipment is shipped and to which it is delivered;
(d) the shipment must be transported only by authorized carriers;
(e) while they transport the shipment, every authorized carrier must produce Parts A and B of the movement document completed in accordance with section 80 when they are required to do so to demonstrate that the movement of the shipment complies with this Part; and
(f) the documents referred to in section 81 must be kept in accordance with that section.

Movement Document

Marginal note:Part A

80 (1) Before a shipment that contains hazardous waste or hazardous recyclable material is shipped by a consignor, the consignor must ensure that Part A of the movement document is completed as follows:
- (a) the hazardous waste or hazardous recyclable material must be categorized into separate types by reference to all of the information set out in subparagraphs 1(g)(i) and (ii) of Schedule 4;
- (b) each type of hazardous waste or hazardous recyclable material for which all of that information is the same must be recorded as a line entry;
- (c) the information set out in paragraph 1(g) of Schedule 4 must be included in each line entry;
- (d) the remaining information set out in item 1 of Schedule 4 and a certification that the information provided is accurate and complete must be included; and
- (e) the individual who provides the information and certification must date and sign Part A.
Marginal note:Part A to provincial authorities
(2) Within three working days after the day on which the shipment is shipped, the consignor must ensure that Part A of the movement document is provided, in the form and manner specified by the Minister, to the authorities of the provinces from which the shipment is shipped and to which it is or is to be delivered, if those authorities ask for it.
Marginal note:Part B
(3) Each authorized carrier must
- (a) complete Part B of the movement document — with Part A completed in accordance with subsection (1) — by including the information set out in item 2 of Schedule 4 and a certification that the information provided is accurate and complete; and
- (b) ensure that the individual who provides the information and certification dates and signs Part B.
Marginal note:Part C
(4) Within three working days after the day on which the shipment is delivered to the site, the consignee must ensure that
- (a) Part C of the movement document — with Part A completed in accordance with subsection (1) — is completed by including the information set out in item 3 of Schedule 4 and a certification that the information provided is accurate and complete;
- (b) the individual who provides the information and certification dates and signs Part C; and
- (c) Part B of the movement document completed by each authorized carrier and Part C of the movement document are provided to the consignor.
Marginal note:Parts B and C — provincial authorities
(5) The consignee must ensure that Part B completed by each authorized carrier and Part C of the movement document are provided to the authorities of the provinces from which the shipment is shipped and to which it is delivered, if those authorities ask for it.
Marginal note:Delivery to site
(6) For the purposes of subsection (4), delivery of a shipment to the site occurs when the shipment arrives at the site, regardless of when hazardous waste or hazardous recyclable material that is contained in the shipment is accepted by the consignee.

Record Retention

Marginal note:Consignor

81 (1) The consignor must keep all documents that are necessary to demonstrate their compliance with this Part at their principal place of business in Canada for a period of five years after the day on which the shipment is shipped.
Marginal note:Consignee
(2) The consignee must keep all documents that are necessary to demonstrate their compliance with this Part at their principal place of business in Canada for a period of five years after the day on which the shipment is delivered to the site.
Marginal note:Authorized carrier
(3) Each authorized carrier must keep all documents that are necessary to demonstrate that the movement of the shipment complies with this Part at their principal place of business in Canada for a period of five years after the day on which they took possession of the shipment.
Marginal note:Delivery to site
(4) For the purposes of subsection (2), delivery of a shipment to the site occurs when the shipment arrives at the site, regardless of when hazardous waste or hazardous recyclable material that is contained in the shipment is accepted by the consignee.

PART 3Consequential Amendments, Transitional Provision, Repeals and Coming into Force

Consequential Amendments

Cargo, Fumigation and Tackle Regulations

82 [Amendments]

PCB Regulations

83 [Amendments]

Regulations Designating Regulatory Provisions for Purposes of Enforcement (Canadian Environmental Protection Act, 1999)

84 [Amendments]

Export of Substances on the Export Control List Regulations

85 [Amendments]

86 [Amendments]

87 [Amendments]

88 [Amendments]

Environmental Violations Administrative Monetary Penalties Regulations

89 [Amendments]

90 [Amendments]

91 [Amendments]

92 [Amendments]

Physical Activities Regulations

93 [Amendments]

Transitional Provision

Marginal note:Previous notices and permits

94 If a notice is submitted to the Minister as an application for a permit under the Export and Import of Hazardous Waste and Hazardous Recyclable Material Regulations, or a permit is issued in connection with such a notice, those Regulations, as they read immediately before the coming into force of these Regulations, apply to the notice or the permit and to the movement, and the disposal or recycling, of hazardous waste or hazardous recyclable material under the permit.

Repeals

95 The following Regulations are repealed:

(a) the PCB Waste Export Regulations, 1996Footnote ⁷;
- Return to footnote ⁷SOR/97-109
(b) the Interprovincial Movement of Hazardous Waste RegulationsFootnote ⁸; and
- Return to footnote ⁸SOR/2002-301
(c) the Export and Import of Hazardous Waste and Hazardous Recyclable Material RegulationsFootnote ⁹.
- Return to footnote ⁹SOR/2005-149

Coming into Force

Marginal note:October 31, 2021

96 These Regulations come into force on October 31, 2021.

SCHEDULE 1(Section 1, subsections 2(1), 3(1) and (2), and 4(1), subparagraphs 4(2)(g)(ii) and (3)(g)(ii), (h)(iv) and (i)(ii), subsections 5(1) and (2), subparagraphs 14(1)(i)(iii) and (j)(iii), paragraph 14(1)(s), clauses 14(1)(u)(iii)(A) and (v)(iii)(A), subsection 17(1), paragraph 17(3)(a), subparagraphs 26(1)(j)(iii) and (k)(iii), paragraph 26(1)(t), clauses 26(1)(v)(iii)(A) and (w)(iii)(a), subsection 29(1), paragraph 29(3)(a), clause 78(1)(a)(iii)(B) and Schedule 3)

PART 1

Disposal Operations

Item	Disposal Code	Operation
	Column 1	Column 2
1	D1	Release into or onto land, other than by an operation that bears any of the disposal codes D3 to D5 and D12.
2	D2	Land treatment, such as biodegradation of liquids or sludges in soil.
3	D3	Deep injection, such as injection into wells, salt domes, mines or naturally occurring repositories.
4	D4	Surface impoundment, such as placing liquids or sludges into pits, ponds or lagoons.
5	D5	Specially engineered landfilling, such as placement into separate lined cells that are isolated from each other and the environment.
6	D6	Release into water, other than a sea or ocean, other than by an operation that bears the disposal code D4.
7	D7	Release into a sea or ocean, including sea-bed insertion, other than by an operation that bears the disposal code D4.
8	D8	Biological treatment, not otherwise set out in this Schedule.
9	D9	Physical or chemical treatment, not otherwise set out in this Schedule, such as calcination, neutralization or precipitation.
10	D10	Incineration or thermal treatment on land.
11	D11	Incineration or thermal treatment at sea.
12	D12	Permanent storage.
13	D13	Interim blending or mixing, before an operation that bears any of the disposal codes D1 to D12.
14	D14	Interim repackaging, before an operation that bears any of the disposal codes D1 to D12.
15	D15	Interim storage, before an operation that bears any of the disposal codes D1 to D12.
16	DC1	Release, including the venting of compressed or liquified gases, or treatment, other than by an operation that bears any of the disposal codes D1 to D12.
17	DC2	Testing of a new disposal technology.

PART 2

Recycling Operations

Item	Recycling Code	Operation
	Column 1	Column 2
1	R1	Use as a fuel in an energy recovery system when the net heating value of the recyclable material is at least 12 780 kJ/kg.
2	R2	Recovery or regeneration of substances that have been used as solvents.
3	R3	Recovery of organic substances that have not been used as solvents.
4	R4	Recovery of metals and metal compounds.
5	R5	Recovery of inorganic material other than metals or metal compounds.
6	R6	Regeneration of acids or bases.
7	R7	Recovery of components used for pollution abatement.
8	R8	Recovery of components from catalysts.
9	R9	Re-refining or re-use of used oil, other than by an operation that bears the recycling code R1.
10	R10	Land treatment resulting in agricultural or ecological improvement.
11	R11	Use of residual material obtained by an operation that bears any of the recycling codes R1 to R10 and RC1.
12	R12	Interim exchange of a recyclable material for another recyclable material before recycling by an operation that bears any of the recycling codes R1 to R11 and RC1.
13	R13	Interim accumulation before recycling by an operation that bears any of the recycling codes R1 to R11 and RC1.
14	RC1	Recovery or regeneration of a substance, other than by an operation that bears any of the recycling codes R1 to R10.
15	RC2	Testing of a new recycling technology.
16	RC3	Interim storage before an operation that bears any of the recycling codes R1 to R11 and RC1.

SCHEDULE 2(Section 1, paragraphs 2(1)(d) and 4(1)(d), clause 78(1)(a)(iii)(J) and Schedules 3 and 4)

Environmentally Hazardous Constituents

Item	Code	CAS Registry NumberFootnote for Environmentally Hazardous Constituents^a	Hazardous Constituents	Concentration (mg/L)
	Column 1	Column 2	Column 3	Column 4
1	L1	93-72-1	2,4,5-TP; 2-(2,4,5-Trichlorophenoxy)propionic acid; Silvex	1.00
2	L2	94-75-7	2,4-D; 2,4-Dichlorophenoxyacetic acid	10.000
3	L3	309-00-2; 60-57-1	Aldrin + Dieldrin	0.070
4	L4	7440-38-2	Arsenic	2.500
5	L5	7440-39-3	Barium	100.000
6	L6	7440-42-8	Boron	500.000
7	L7	7440-43-9	Cadmium	0.500
8	L8	63-25-2	1-Naphthyl N-methylcarbamate; Carbaryl; Sevin	9.000
9	L9	57-74-9	Chlordane	0.700
10	L10	7440-47-3	Chromium	5.000
11	L11	57-12-5	Cyanide	20.000
12	L12	50-29-3	DDT	3.000
13	L13	333-41-5	Diazinon; Phosphordithioic acid, O,O-diethyl O-(2 -isopropyl-6-methyl-4 -pyrimidinyl) ester	2.000
14	L14	72-20-8	Endrin	0.02
15	L15	16984-48-8	Fluoride	150.00
16	L16	76-44-8; 1024-57-3	Heptachlor + Heptachlor epoxide	0.30
17	L17	7439-92-1	Lead	5.00
18	L18	58-89-9	Lindane	0.40
19	L19	7439-97-6	Mercury	0.10
20	L20	72-43-5	1,1,1-Trichloro-2,2-bis(p-methoxyphenyl)ethane; Methoxychlor	90.00
21	L21	298-00-0	Methyl parathion	0.70
22	L22	14797-55-8; 14797-65-0	Nitrate + Nitrite	1000.000
23	L23	139-13-9	Nitrilotriacetic acid; NTA	40.00
24	L24	14797-65-0	Nitrite	320.00
25	L26	56-38-2	Parathion	5.00
26	L27	7782-49-2	Selenium	1.00
27	L29	8001-35-2	Toxaphene	0.50
28	L30	NA	Trihalomethanes — Total	10.00
29	L31	7440-61-1	Uranium	10.00
30	L32	116-06-3	Aldicarb	0.900
31	L33	1912-24-9Footnote for Environmentally Hazardous Constituents^b	Atrazine + N dealkylated-metabolites	0.500
32	L34	86-50-0	Azinphos-methyl	2.000
33	L35	22781-23-3	Bendiocarb	4.000
34	L36	71-43-2	Benzene	0.500
35	L37	50-32-8	Benzo[a]pyrene	0.001
36	L38	1689-84-5	Bromoxynil	0.500
37	L39	1563-66-2	Carbofuran	9.000
38	L40	56-23-5	Carbon tetrachloride; Tetrachloromethane	0.5000
39	L41	10599-90-3	Chloramine	300.000
40	L42	108-90-7	Chlorobenzene; Monochlorobenzene	8.000
41	L43	67-66-3	Chloroform	10.000
42	L44	2921-88-2	Chlorpyrifos	9.000
43	L45	1319-77-3	Cresol (Mixture — total of all isomers, when isomers cannot be differentiated)	200.000
44	L46	108-39-4	m-Cresol	200.000
45	L47	95-48-7	o-Cresol	200.000
46	L48	106-44-5	p-Cresol	200.000
47	L49	21725-46-2	Cyanazine	1.000
48	L50	120-83-2	2,4-DCP; 2,4-Dichlorophenol	90.000
49	L51	1918-00-9	Dicamba	12.000
50	L52	95-50-1	1,2-Dichlorobenzene; o-Dichlorobenzene	20.00
51	L53	106-46-7	1,4-Dichlorobenzene; p-Dichlorobenzene	0.50
52	L54	107-06-2	1,2-Dichloroethane; Ethylene dichloride	5.0
53	L55	75-35-4	1,1-Dichloroethylene; Vinylidene chloride	1.40
54	L56	75-09-2	Dichloromethane; Methylene chloride	5.00
55	L57	51338-27-3	Diclofop-methyl	0.90
56	L58	60-51-5	Dimethoate	2.00
57	L59	121-14-2	2,4-Dinitrotoluene	0.13
58	L60	88-85-7	Dinoseb	1.00
59	L70	2764-72-9	Diquat	7.00
60	L71	330-54-1	Diuron	15.00
61	L72	1071-83-6	Glyphosate	28.00
62	L73	118-74-1	Hexachlorobenzene	0.13
63	L74	87-68-3	Hexachlorobutadiene	0.50
64	L75	67-72-1	Hexachloroethane	3.00
65	L76	121-75-5	Malathion	19.00
66	L77	78-93-3	Ethyl, methyl ketone; Methylethyl ketone	200.00
67	L79	51218-45-2	Metolachlor	5.00
68	L80	21087-64-9	Metribuzin	8.00
69	L81	14797-55-8	Nitrate	4500.00
70	L82	98-95-3	Nitrobenzene	2.00
71	L83	1910-42-5	Paraquat	1.00
72	L84	87-86-5	Pentachlorophenol	6.00
73	L85	298-02-2	Phorate	0.20
74	L86	1918-02-1	Picloram	19.00
75	L87	110-86-1	Pyridine	5.00
76	L88	122-34-9	Simazine	1.00
77	L89	93-76-5	2,4,5-T; 2,4,5-Trichlorophenoxyacetic acid	28.00
78	L90	3383-96-8	Temefos	28.00
79	L91	13071-79-9	Terbufos	0.10
80	L92	127-18-4	Tetrachloroethylene	3.00
81	L93	58-90-2	2,3,4,6-Tetrachlorophenol; 2,3,4,6-TeCP	10.00
82	L94	2303-17-5	Triallate	23.00
83	L95	79-01-6	Trichloroethylene	5.00
84	L96	95-95-4	2,4,5-TCP; 2,4,5-Trichlorophenol	400.00
85	L97	88-06-2	2,4,6-TCP; 2,4,6-Trichlorophenol	0.50
86	L98	1582-09-8	Trifluralin	4.50
87	L99	75-01-4	Vinyl chloride	0.20
88	L100	NAFootnote for Environmentally Hazardous Constituents^c	Polychlorinated dibenzo dioxins and furans	0.0000015 TEQ

Return to footnote ^aCAS registry numbers are provided for reference purposes only. They do not form part of these Regulations and may be amended without the need to amend these Regulations.
Return to footnote ^bCAS numbers are provided for parent or main compound only.
Return to footnote ^cMixture of isomers.

SCHEDULE 3(Section 1, subsections 8(3) and (4), paragraph 16(1)(b), subsections 20(3) and (4), paragraph 28(1)(b), subsections 32(3) and (4), paragraph 40(1)(b), subsections 42(3) and (4) and 53(3) and (4), paragraph 61(1)(b), subsections 64(3) and (4) and paragraph 72(1)(b))Notification for Import, Export and Transit Permits — Information Required

1 The following information is required in a notification for an import permit:
- (a) the reference number that is provided by the Minister for the notification;
- (b) the applicant’s name, telephone number, email address, mailing address and unique identification number;
- (c) the applicant’s civic address in Canada, which, in the case of a corporation, is the address of its head office or branch office in Canada;
- (d) the foreign exporter’s name, mailing address and unique identification number;
- (e) the name, civic address and unique identification number of
  - (i) the facility from which the hazardous waste or hazardous recyclable material is to be shipped,
  - (ii) the receiving facility, and
  - (iii) every other authorized facility that is to perform a final disposal operation or final recycling operation;
- (f) the name, mailing address and unique identification number of each authorized carrier that is to transport the hazardous waste or hazardous recyclable material and each mode of transportation that is to be used by them;
- (g) the name, telephone number and email address of the contact person for
  - (i) the applicant,
  - (ii) the foreign exporter,
  - (iii) the facility from which the hazardous waste or hazardous recyclable material is to be shipped,
  - (iv) the receiving facility,
  - (v) every other authorized facility that is to perform a final disposal operation or final recycling operation, and
  - (vi) each authorized carrier that is to transport the hazardous waste or hazardous recyclable material;
- (h) each customs office at which the hazardous waste or hazardous recyclable material is required to be reported under section 12 of the Customs Act;
- (i) each country of transit; and
- (j) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the notification,
  - (i) the applicable UN number set out in column 1 of Schedule 1 to the Transportation of Dangerous Goods Regulations or, if no UN number applies to it under those Regulations, the abbreviation “n/a”,
  - (ii) the applicable class set out in column 3 of Schedule 1 to the Transportation of Dangerous Goods Regulations,
  - (iii) the following codes:
    - (A) the applicable codes set out in column 1 of Part 1 of Schedule 11,
    - (B) the disposal or recycling code set out in column 1 of either Part 1 or 2 of Schedule 1 for the applicable operation set out in column 2 of that Part to be performed at the receiving facility,
    - (C) the letter L when the hazardous waste or hazardous recyclable material is a liquid, the letter P when it is a sludge, the letter S when it is a solid and the letter G when it is a gas, followed in each case by the applicable code set out in column 1 of Part 2 of Schedule 11,
    - (D) the applicable codes set out in column 1 of Part 3 of Schedule 11 or C0 when no code is applicable,
    - (E) the applicable codes set out in column 1 of Part 4 of Schedule 11 or H0 when no code is applicable,
    - (F) the applicable code set out in column 1 of Part 5 of Schedule 11,
    - (G) the applicable codes set out in Annex I or II to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada or Y0 when no code is applicable,
    - (H) the applicable code, if any, set out in List A of Annex VIII to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (I) in the case of hazardous recyclable material that is either to be imported from a country of origin, or conveyed in transit through a country, that is subject to OECD Decision C(2001)107/FINAL, the applicable code, if any, set out in Part II of Appendix 4 to that Decision, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (J) in the case of hazardous waste that is set out in column 2 of Schedule 6 or 12 or column 3 of Schedule 8 or that contains a substance that is set out in column 3 of Schedule 7, the applicable codes, if any, set out in column 1 of the applicable Schedule,
    - (K) in the case of hazardous waste or hazardous recyclable material that produces a leachate that contains one or more environmentally hazardous constituents, the applicable codes, if any, set out in column 1 of Schedule 2 for each environmentally hazardous constituent, and
    - (L) the applicable code, if any, set out in column 1 of Schedule 5 for every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material,
  - (iv) the total quantity of that type of hazardous waste or hazardous recyclable material, in kilograms or litres, to be shipped under the permit,
  - (v) the proposed number of shipments of that type of hazardous waste or hazardous recyclable material to be shipped under the permit,
  - (vi) the disposal or recycling code for the final disposal operation or final recycling operation that is to be performed on that type of hazardous waste or hazardous recyclable material by an authorized facility other than the receiving facility and the name of the authorized facility that is to perform that operation, and
  - (vii) the quantity and concentration of every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material.
2 The following information is required in a notification for an export permit:
- (a) the reference number that is provided by the Minister for the notification;
- (b) the applicant’s name, telephone number, email address, mailing address and unique identification number;
- (c) the applicant’s civic address in Canada, which, in the case of a corporation, is the address of its head office or branch office in Canada;
- (d) the foreign importer’s name, mailing address and unique identification number;
- (e) the name, civic address and unique identification number of
  - (i) the facility from which the hazardous waste or hazardous recyclable material is to be shipped,
  - (ii) the receiving facility, and
  - (iii) every other authorized facility that is to perform a final disposal operation or final recycling operation;
- (f) the name, mailing address and unique identification number of each authorized carrier that is to transport the hazardous waste or hazardous recyclable material and each mode of transportation that is to be used by them;
- (g) the name, telephone number and email address of the contact person for
  - (i) the applicant,
  - (ii) the foreign importer,
  - (iii) the facility from which the hazardous waste or hazardous recyclable material is to be shipped,
  - (iv) the receiving facility,
  - (v) every other authorized facility that is to perform a final disposal operation or final recycling operation, and
  - (vi) each authorized carrier that is to transport the hazardous waste or hazardous recyclable material;
- (h) each customs office at which the hazardous waste or hazardous recyclable material is required to be reported under section 95 of the Customs Act;
- (i) each country of transit; and
- (j) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the notification,
  - (i) the applicable UN number set out in column 1 of Schedule 1 to the Transportation of Dangerous Goods Regulations or, if no UN number applies to it under those Regulations, the abbreviation “n/a”,
  - (ii) the applicable class set out in column 3 of Schedule 1 to the Transportation of Dangerous Goods Regulations,
  - (iii) the following codes:
    - (A) the applicable codes set out in column 1 of Part 1 of Schedule 11,
    - (B) the disposal or recycling code set out in column 1 of either Part 1 or 2 of Schedule 1 for the applicable operation set out in column 2 of that Part to be performed at the receiving facility,
    - (C) the letter L when the hazardous waste or hazardous recyclable material is a liquid, the letter P when it is a sludge, the letter S when it is a solid and the letter G when it is a gas, followed in each case by the applicable code set out in column 1 of Part 2 of Schedule 11,
    - (D) the applicable codes set out in column 1 of Part 3 of Schedule 11 or C0 when no code is applicable,
    - (E) the applicable codes set out in column 1 of Part 4 of Schedule 11 or H0 when no code is applicable,
    - (F) the applicable code set out in column 1 of Part 5 of Schedule 11,
    - (G) the applicable codes set out in Annex I or II to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada or Y0 when no code is applicable,
    - (H) the applicable code, if any, set out in List A of Annex VIII to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (I) in the case of hazardous recyclable material that is either to be exported to a country of destination, or conveyed in transit through a country, that is subject to OECD Decision C(2001)107/FINAL, the applicable code, if any, set out in Part II of Appendix 4 to that Decision, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (J) in the case of hazardous waste that is set out in column 2 of Schedule 6 or 12 or column 3 of Schedule 8 or that contains a substance that is set out in column 3 of Schedule 7, the applicable codes, if any, set out in column 1 of the applicable Schedule,
    - (K) in the case of hazardous waste or hazardous recyclable material that produces a leachate that contains one or more environmentally hazardous constituents, the applicable codes, if any, set out in column 1 of Schedule 2 for each environmentally hazardous constituent, and
    - (L) the applicable code, if any, set out in column 1 of Schedule 5 for every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material,
  - (iv) the total quantity of that type of hazardous waste or hazardous recyclable material, in kilograms or litres, to be shipped under the permit,
  - (v) the proposed number of shipments of that type of hazardous waste or hazardous recyclable material to be shipped under the permit,
  - (vi) the disposal or recycling code for the final disposal operation or final recycling operation that is to be performed on that type of hazardous waste or hazardous recyclable material by an authorized facility other than the receiving facility and the name of the authorized facility that is to perform that operation, and
  - (vii) the quantity and concentration of every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material.
3 The following information is required in a notification for a permit to export hazardous waste or hazardous recyclable material and to import it to Canada after it is conveyed in transit through a foreign country:
- (a) the reference number that is provided by the Minister for the notification;
- (b) the applicant’s name, telephone number, email address, mailing address and unique identification number;
- (c) the applicant’s civic address in Canada, which, in the case of a corporation, is the address of its head office or branch office in Canada;
- (d) the name, civic address and unique identification number of
  - (i) the facility from which the hazardous waste or hazardous recyclable material is to be shipped,
  - (ii) the receiving facility, and
  - (iii) every other authorized facility that is to perform a final disposal operation or final recycling operation;
- (e) the name, mailing address and unique identification number of each authorized carrier that is to transport the hazardous waste or hazardous recyclable material and each mode of transportation that is to be used by them;
- (f) the name, telephone number and email address of the contact person for
  - (i) the applicant,
  - (ii) the facility from which the hazardous waste or hazardous recyclable material is to be shipped,
  - (iii) the receiving facility,
  - (iv) every other authorized facility that is to perform a final disposal operation or final recycling operation, and
  - (v) each authorized carrier that is to transport the hazardous waste or hazardous recyclable material;
- (g) each customs office at which the hazardous waste or hazardous recyclable material is required to be reported under sections 12 and 95 of the Customs Act or an indication that one or both of those sections do not apply;
- (h) each country of transit; and
- (i) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the notification,
  - (i) the applicable UN number set out in column 1 of Schedule 1 to the Transportation of Dangerous Goods Regulations or, if no UN number applies to it under those Regulations, the abbreviation “n/a”,
  - (ii) the applicable class set out in column 3 of Schedule 1 to the Transportation of Dangerous Goods Regulations,
  - (iii) the following codes:
    - (A) the applicable codes set out in column 1 of Part 1 of Schedule 11,
    - (B) the disposal or recycling code set out in column 1 of either Part 1 or 2 of Schedule 1 for the applicable operation set out in column 2 of that Part to be performed at the receiving facility,
    - (C) the letter L when the hazardous waste or hazardous recyclable material is a liquid, the letter P when it is a sludge, the letter S when it is a solid and the letter G when it is a gas, followed in each case by the applicable code set out in column 1 of Part 2 of Schedule 11,
    - (D) the applicable codes set out in column 1 of Part 3 of Schedule 11 or C0 when no code is applicable,
    - (E) the applicable codes set out in column 1 of Part 4 of Schedule 11 or H0 when no code is applicable,
    - (F) the applicable code set out in column 1 of Part 5 of Schedule 11,
    - (G) the applicable codes set out in Annex I or II to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada or Y0 when no code is applicable,
    - (H) the applicable code, if any, set out in List A of Annex VIII to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (I) in the case of hazardous recyclable material that is to be conveyed in transit through a country that is subject to OECD Decision C(2001)107/FINAL, the applicable code, if any, set out in Part II of Appendix 4 to that Decision, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (J) in the case of hazardous waste that is set out in column 2 of Schedule 6 or 12 or column 3 of Schedule 8 or that contains a substance that is set out in column 3 of Schedule 7, the applicable codes, if any, set out in column 1 of the applicable Schedule,
    - (K) in the case of hazardous waste or hazardous recyclable material that produces a leachate that contains one or more environmentally hazardous constituents, the applicable codes, if any, set out in column 1 of Schedule 2 for each environmentally hazardous constituent, and
    - (L) the applicable code, if any, set out in column 1 of Schedule 5 for every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material,
  - (iv) the total quantity of that type of hazardous waste or hazardous recyclable material, in kilograms or litres, to be shipped under the permit,
  - (v) the proposed number of shipments of that type of hazardous waste or hazardous recyclable material to be shipped under the permit,
  - (vi) the disposal or recycling code for the final disposal operation or final recycling operation that is to be performed on that type of hazardous waste or hazardous recyclable material by an authorized facility other than the receiving facility and the name of the authorized facility that is to perform that operation, and
  - (vii) the quantity and concentration of every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material.
4 The following information is required in a notification for a permit to convey hazardous waste or hazardous recyclable material in transit through Canada:
- (a) the reference number that is provided by the Minister for the notification;
- (b) the applicant’s name, telephone number, email address, civic address — and, if different, mailing address — and unique identification number;
- (c) the foreign importer’s name, mailing address and unique identification number;
- (d) the name, civic address and unique identification number of
  - (i) the facility from which the hazardous waste or hazardous recyclable material is to be shipped, and
  - (ii) the receiving facility;
- (e) the name, mailing address and unique identification number of each authorized carrier that is to transport the hazardous waste or hazardous recyclable material in Canada and each mode of transportation that is to be used by them;
- (f) the name, telephone number and email address of the contact person for
  - (i) the applicant,
  - (ii) the foreign importer,
  - (iii) the facility from which the hazardous waste or hazardous recyclable material is to be shipped,
  - (iv) the receiving facility, and
  - (v) each authorized carrier that is to transport the hazardous waste or hazardous recyclable material in Canada;
- (g) each customs office at which the hazardous waste or hazardous recyclable material is required to be reported under sections 12 and 95 of the Customs Act or an indication that one or both of those sections do not apply;
- (h) each foreign country of transit; and
- (i) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the notification,
  - (i) the applicable UN number set out in column 1 of Schedule 1 to the Transportation of Dangerous Goods Regulations or, if no UN number applies to it under those Regulations, the abbreviation “n/a”,
  - (ii) the applicable class set out in column 3 of Schedule 1 to the Transportation of Dangerous Goods Regulations,
  - (iii) the following codes:
    - (A) the applicable codes set out in column 1 of Part 1 of Schedule 11,
    - (B) the disposal or recycling code set out in column 1 of either Part 1 or 2 of Schedule 1 for the applicable operation set out in column 2 of that Part to be performed at the receiving facility,
    - (C) the letter L when the hazardous waste or hazardous recyclable material is a liquid, the letter P when it is a sludge, the letter S when it is a solid and the letter G when it is a gas, followed in each case by the applicable code set out in column 1 of Part 2 of Schedule 11,
    - (D) the applicable codes set out in column 1 of Part 3 of Schedule 11 or C0 when no code is applicable,
    - (E) the applicable codes set out in column 1 of Part 4 of Schedule 11 or H0 when no code is applicable,
    - (F) the applicable code set out in column 1 of Part 5 of Schedule 11,
    - (G) the applicable codes set out in Annex I or II to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada or Y0 when no code is applicable,
    - (H) the applicable code, if any, set out in List A of Annex VIII to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (I) in the case of hazardous recyclable material that is either to be exported to a country of destination, or conveyed in transit through a country, that is subject to OECD Decision C(2001)107/FINAL, the applicable code, if any, set out in Part II of Appendix 4 to that Decision, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (J) in the case of hazardous waste that is set out in column 2 of Schedule 6 or 12 or column 3 of Schedule 8 or that contains a substance that is set out in column 3 of Schedule 7, the applicable codes, if any, set out in column 1 of the applicable Schedule,
    - (K) in the case of hazardous waste or hazardous recyclable material that produces a leachate that contains one or more environmentally hazardous constituents, the applicable codes, if any, set out in column 1 of Schedule 2 for each environmentally hazardous constituent, and
    - (L) the applicable code, if any, set out in column 1 of Schedule 5 for every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material,
  - (iv) the total quantity of that type of hazardous waste or hazardous recyclable material, in kilograms or litres, to be shipped under the permit,
  - (v) the proposed number of shipments of that type of hazardous waste or hazardous recyclable material to be shipped under the permit, and
  - (vi) the quantity and concentration of every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material.
5 The following information is required in a notification for an import permit to return hazardous waste or hazardous recyclable material to Canada:
- (a) the reference number that is provided by the Minister for the notification;
- (b) if the applicant is the permit holder referred to in subsection 52(1),
  - (i) the reference number of the movement document or movement documents for the shipment of the hazardous waste or hazardous recyclable material under the original export permit or permits,
  - (ii) every line entry in that movement document or movement documents that applies to the hazardous waste or hazardous recyclable material that is to be returned to Canada, and
  - (iii) the name, mailing address and unique identification number of the foreign importer that is named in the original export permit or permits;
- (c) the applicant’s name, telephone number, email address, mailing address and unique identification number;
- (d) the applicant’s civic address in Canada, which, in the case of a corporation, is the address of its head office or branch office in Canada;
- (e) the name, civic address and unique identification number of
  - (i) the facility in the foreign country from which the hazardous waste or hazardous recyclable material is to be shipped, and
  - (ii) the facility in Canada to which the hazardous waste or hazardous recyclable material is to be delivered;
- (f) the name, mailing address and unique identification number of each authorized carrier that is to transport the hazardous waste or hazardous recyclable material and each mode of transportation that is to be used by them;
- (g) the name, telephone number and email address of the contact person for
  - (i) the applicant,
  - (ii) if applicable, the foreign importer that is named in the original export permit or permits,
  - (iii) the facility in the foreign country from which the hazardous waste or hazardous recyclable material is to be shipped,
  - (iv) the facility in Canada to which the hazardous waste or hazardous recyclable material is to be delivered, and
  - (v) each authorized carrier that is to transport the hazardous waste or hazardous recyclable material;
- (h) each customs office at which the hazardous waste or hazardous recyclable material is required to be reported under section 12 of the Customs Act;
- (i) each country of transit; and
- (j) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the notification,
  - (i) the applicable UN number set out in column 1 of Schedule 1 to the Transportation of Dangerous Goods Regulations or, if no UN number applies to it under those Regulations, the abbreviation “n/a”,
  - (ii) the applicable class set out in column 3 of Schedule 1 to the Transportation of Dangerous Goods Regulations,
  - (iii) the following codes:
    - (A) the applicable codes set out in column 1 of Part 1 of Schedule 11,
    - (B) the letter L when the hazardous waste or hazardous recyclable material is a liquid, the letter P when it is a sludge, the letter S when it is a solid and the letter G when it is a gas, followed in each case by the applicable code set out in column 1 of Part 2 of Schedule 11,
    - (C) the applicable codes set out in column 1 of Part 3 of Schedule 11 or C0 when no code is applicable,
    - (D) the applicable codes set out in column 1 of Part 4 of Schedule 11 or H0 when no code is applicable,
    - (E) the applicable code set out in column 1 of Part 5 of Schedule 11,
    - (F) the applicable codes set out in Annex I or II to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada or Y0 when no code is applicable,
    - (G) the applicable code, if any, set out in List A of Annex VIII to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (H) in the case of hazardous recyclable material that is either to be returned from, or conveyed in transit through, a country that is subject to OECD Decision C(2001)107/FINAL, the applicable code, if any, set out in Part II of Appendix 4 to that Decision, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (I) in the case of hazardous waste that is set out in column 2 of Schedule 6 or 12 or column 3 of Schedule 8 or that contains a substance that is set out in column 3 of Schedule 7, the applicable codes, if any, set out in column 1 of the applicable Schedule,
    - (J) in the case of hazardous waste or hazardous recyclable material that produces a leachate that contains one or more environmentally hazardous constituents, the applicable codes, if any, set out in column 1 of Schedule 2 for each environmentally hazardous constituent, and
    - (K) the applicable code, if any, set out in column 1 of Schedule 5 for every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material,
  - (iv) the quantity of that type of hazardous waste or hazardous recyclable material, in kilograms or litres, to be returned under the permit, and
  - (v) the quantity and concentration of every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material.
6 The following information is required in a notification for an export permit to return hazardous waste or hazardous recyclable material to a foreign country of origin:
- (a) the reference number that is provided by the Minister for the notification;
- (b) if the applicant is the permit holder referred to in subsection 63(1),
  - (i) the reference number of the movement document or movement documents for the shipment of the hazardous waste or hazardous recyclable material under the original import permit or permits,
  - (ii) every line entry in that movement document or movement documents that applies to the hazardous waste or hazardous recyclable material that is to be returned to the country of origin, and
  - (iii) the name, mailing address and unique identification number of the foreign exporter that is named in the original import permit or permits;
- (c) the applicant’s name, telephone number, email address, mailing address and unique identification number;
- (d) the applicant’s civic address in Canada, which, in the case of a corporation, is the address of its head office or branch office in Canada;
- (e) the name, civic address and unique identification number of
  - (i) the facility in Canada from which the hazardous waste or hazardous recyclable material is to be shipped, and
  - (ii) the facility in the country of origin to which the hazardous waste or hazardous recyclable material is to be delivered;
- (f) the name, mailing address and unique identification number of each authorized carrier that is to transport the hazardous waste or hazardous recyclable material and each mode of transportation that is to be used by them;
- (g) the name, telephone number and email address of the contact person for
  - (i) the applicant,
  - (ii) the foreign exporter that is named in the original import permit or permits,
  - (iii) the facility in Canada from which the hazardous waste or hazardous recyclable material is to be shipped,
  - (iv) the facility in the country of origin to which the hazardous waste or hazardous recyclable material is to be delivered, and
  - (v) each authorized carrier that is to transport the hazardous waste or hazardous recyclable material;
- (h) each customs office at which the hazardous waste or hazardous recyclable material is required to be reported under section 95 of the Customs Act;
- (i) each country of transit; and
- (j) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the notification,
  - (i) the applicable UN number set out in column 1 of Schedule 1 to the Transportation of Dangerous Goods Regulations or, if no UN number applies to it under those Regulations, the abbreviation “n/a”,
  - (ii) the applicable class set out in column 3 of Schedule 1 to the Transportation of Dangerous Goods Regulations,
  - (iii) the following codes:
    - (A) the applicable codes set out in column 1 of Part 1 of Schedule 11,
    - (B) the letter L when the hazardous waste or hazardous recyclable material is a liquid, the letter P when it is a sludge, the letter S when it is a solid and the letter G when it is a gas, followed in each case by the applicable code set out in column 1 of Part 2 of Schedule 11,
    - (C) the applicable codes set out in column 1 of Part 3 of Schedule 11 or C0 when no code is applicable,
    - (D) the applicable codes set out in column 1 of Part 4 of Schedule 11 or H0 when no code is applicable,
    - (E) the applicable code set out in column 1 of Part 5 of Schedule 11,
    - (F) the applicable codes set out in Annex I or II to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada or Y0 when no code is applicable,
    - (G) the applicable code, if any, set out in List A of Annex VIII to the Convention, as it read on May 5, 1992, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (H) in the case of hazardous recyclable material that is either to be returned to, or conveyed in transit through, a country that is subject to OECD Decision C(2001)107/FINAL, the applicable code, if any, set out in Part II of Appendix 4 to that Decision, as amended from time to time, to the extent that the amendments are binding on Canada,
    - (I) in the case of hazardous waste that is set out in column 2 of Schedule 6 or 12 or column 3 of Schedule 8 or that contains a substance that is set out in column 3 of Schedule 7, the applicable codes, if any, set out in column 1 of the applicable Schedule,
    - (J) in the case of hazardous waste or hazardous recyclable material that produces a leachate that contains one or more environmentally hazardous constituents, the applicable codes, if any, set out in column 1 of Schedule 2 for each environmentally hazardous constituent, and
    - (K) the applicable code, if any, set out in column 1 of Schedule 5 for every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material,
  - (iv) the quantity of that type of hazardous waste or hazardous recyclable material, in kilograms or litres, to be shipped under the permit, and
  - (v) the quantity and concentration of every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material.

SCHEDULE 4(Section 1 and paragraphs 80(1)(a), (c) and (d), (3)(a) and (4)(a))Movement Document for Movement Within Canada — Information Required

1 The following information is required before a shipment is shipped from a consignor to a site that is owned, operated or otherwise controlled by a consignee:
- (a) the reference number that is provided for the movement document by the Minister or the province from which the shipment is to be shipped or to which it is to be delivered;
- (b) the consignor’s name, telephone number, email address, mailing address and unique identification number;
- (c) the name and telephone number of the individual who signs the movement document;
- (d) the civic address — or, if there is no civic address, the Global Positioning System (GPS) coordinates — of the final loading point of the shipment before crossing the provincial border;
- (e) the consignee’s name, telephone number, email address and unique identification number;
- (f) the civic address — or, if there is no civic address, the location — of the site to which the shipment is to be delivered;
- (g) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the movement document,
  - (i) the applicable UN number set out in column 1 of Schedule 1 to the Transportation of Dangerous Goods Regulations or, if no UN number applies to it under those Regulations, the abbreviation “n/a”,
  - (ii) the shipping name and description that are set out in column 2 of Schedule 1 to the Transportation of Dangerous Goods Regulations and are associated with the UN number referred to in that line entry,
  - (iii) the applicable class set out in column 3 of Schedule 1 to the Transportation of Dangerous Goods Regulations,
  - (iv) the following codes:
    - (A) the letter L when the hazardous waste or hazardous recyclable material is a liquid, the letter P when it is a sludge, the letter S when it is a solid and the letter G when it is a gas, followed in each case by the applicable code set out in column 1 of Part 2 of Schedule 11,
    - (B) the applicable codes set out in column 1 of Part 4 of Schedule 11,
    - (C) in the case of hazardous waste that is set out in column 2 of Schedule 6 or 12 or column 3 of Schedule 8 or that contains a substance that is set out in column 3 of Schedule 7, the applicable codes, if any, set out in column 1 of the applicable Schedule,
    - (D) in the case of hazardous waste or hazardous recyclable material that produces a leachate that contains one or more environmentally hazardous constituents, the applicable codes, if any, set out in column 1 of Schedule 2 for each environmentally hazardous constituent, and
    - (E) the applicable code, if any, set out in column 1 of Schedule 5 for every persistent organic pollutant that is contained in the hazardous waste or hazardous recyclable material,
  - (v) the quantity of that type of hazardous waste or hazardous recyclable material, in kilograms or litres, to be shipped, and
  - (vi) the number of containers used, if applicable, and the code 01 when the container is a drum, 02 when it is a tank, 03 when the hazardous waste or hazardous recyclable material is shipped in bulk, 04 when the container is a carton, 05 when it is a bag, 06 when it is roll off or lugger, 07 when it is palletized, wrapped with plastic wrap and not in any other container, 08 when it is a mix of containers or 09 in any other case; and
- (h) the date on which the shipment is to be shipped and the date on which it is scheduled to be delivered.
2 The following information is required from an authorized carrier:
- (a) the authorized carrier’s name, telephone number, email address, mailing address and unique identification number;
- (b) the name and telephone number of the individual who signs the movement document; and
- (c) a confirmation
  - (i) that the authorized carrier has received the shipment, and
  - (ii) if applicable, that they are to deliver the shipment to the site that is owned, operated or otherwise controlled by the consignee.
3 The following information is required after the shipment is delivered:
- (a) the consignee’s name, telephone number, email address, mailing address and unique identification number;
- (b) the name and telephone number of the individual who signs the movement document;
- (c) the civic address — or, if there is no civic address, the location — of the site to which the shipment was delivered;
- (d) the date on which the shipment was delivered; and
- (e) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the movement document, the quantity of the hazardous waste or hazardous recyclable material, in kilograms or litres, that was received.

SCHEDULE 5(Section 1, clause 78(1)(a)(iii)(K) and Schedules 3 and 4)

Persistent Organic Pollutants

Item	Code	CAS Registry NumberFootnote for Persistent Organic Pollutants^a	Persistent Organic Pollutant	Concentration
	Column 1	Column 2	Column 3	Column 4
1	POP1	309-00-2	Aldrin	50 mg/kg
2	POP2	57-74-9	Chlordane	50 mg/kg
2	POP2	57-74-9	Chlordane	50 mg/kg
3	POP3	60-57-1	Dieldrin	50 mg/kg
4	POP4	72-20-8	Endrin	50 mg/kg
5	POP5	76-44-8	Heptachlor	50 mg/kg
6	POP6	118-74-1	Hexachlorobenzene	50 mg/kg
7	POP7	2385-85-5	Mirex	50 mg/kg
8	POP8	8001-35-2	Toxaphene	50 mg/kg
9	POP9	1336-36-3	PCB; Polychlorinated Biphenyls	50 mg/kg
10	POP10	50-29-3	1,1,1-Trichloro-2,2-bis(4-chlorophenyl)ethane; DDT	50 mg/kg
11	POP11	NAFootnote for Persistent Organic Pollutants^b	PCDD; Polychlorinated dibenzo-p-dioxins	15 µg TEQ/kg
12	POP12	NAFootnote for Persistent Organic Pollutants^b	PCDF; Polychlorinated dibenzofurans	15 µg TEQ/kg

Return to footnote ^aCAS registry numbers are provided for reference purposes only. They do not form part of these Regulations and may be amended without the need to amend these Regulations.
Return to footnote ^bMixture of isomers.

SCHEDULE 6(Paragraphs 2(1)(a), 4(1)(a), 14(1)(e) and 26(1)(f), clause 78(1)(a)(iii)(I) and Schedules 3 and 4)

Hazardous Waste and Hazardous Recyclable Material

Item	Code	Description of Hazardous Waste and Hazardous Recyclable Material
	Column 1	Column 2
1	HAZ1	(1) Biomedical waste — the following waste, other than that set out in subitem (2) or that generated from building maintenance, office administration or food preparation and consumption, that is generated by human or animal health care establishments, medical, health care or veterinary teaching or research establishments, clinical laboratories or facilities that test or produce vaccines, and needle and syringe exchange programs: (a) human tissues, organs or body parts, excluding teeth, hair or nails; (b) human blood or blood products; (c) human bodily fluids that are contaminated with blood; (d) human bodily fluids that are removed in the course of autopsy, treatment, or surgery for diagnosis; (e) animal tissues, organs, body parts or carcasses, excluding teeth, nails, hair, bristles, feathers, horns and hooves, that result from the treatment of an animal for contamination or suspected contamination with an infectious substance that meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations; (f) animal blood or blood products that result from the treatment of an animal for contamination or suspected contamination with an infectious substance that meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations; (g) animal bodily fluids that are visibly contaminated with animal blood and that result from the treatment of an animal for contamination or suspected contamination with an infectious substance that meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations; (h) animal bodily fluids that are removed in the course of surgery, treatment or necropsy, and that result from the treatment of an animal for contamination or suspected contamination with an infectious substance that meets the criteria for inclusion in Class 6.2 as set out in Part 2 of the Transportation of Dangerous Goods Regulations; (i) live or attenuated vaccines, human or animal cell cultures, microbiology laboratory cultures, stocks or specimens of microorganisms and any items that have come into contact with them; (j) any items that are saturated with the blood or bodily fluids referred to in paragraphs (b) to (d) or (f) to (h), including items that were saturated but have dried; and (k) cytotoxic drugs and any items, including tissues, tubing, needles or gloves, that have come into contact with a cytotoxic drug. (2) Biomedical waste does not include the following: (a) urine or feces; (b) waste that is controlled under the Health of Animals Act; or (c) waste that results from the breeding or raising of animals.
2	HAZ2	Used lubricating oils in quantities of 500 L or more, from internal combustion engines or gear boxes, transmissions, transformers, hydraulic systems or other equipment associated with such engines.
3	HAZ3	Used oil filters containing more than 6% of oil by mass.
4	HAZ4	Cyanide, or substances containing cyanide, in a concentration equal to or greater than 100 mg/kg.
5	HAZ5	Waste that contains more than 2 mg/kg of polychlorinated terphenyls or polybrominated biphenyls as those substances are described in Schedule 1 to the Act.
6	HAZ6	(1) Waste that contains, in a concentration of more than 100 ng/kg of 2,3,7,8-tetrachlorodibenzo-p-dioxin equivalent, calculated in accordance with subitem (2), (a) total polychlorinated dibenzofurans that have a molecular formula C₁₂H_8-nCl_nO in which “n” is greater than 1; or (b) total polychlorinated dibenzo-p-dioxins that have a molecular formula C₁₂H_8-nCl_nO₂ in which “n” is greater than 1. (2) The concentration is calculated in accordance with “International Toxicity Equivalency Factor (I-TEF) Method of Risk Assessment for Complex Mixtures of Dioxins and Related Compounds”, Pilot Study on International Information Exchange on Dioxins and Related Compounds, Committee on the Challenges of Modern Society, North Atlantic Treaty Organization, Report Number 176, August 1988, as amended from time to time, using the following factors: (a) 2,3,7,8-tetrachlorodibenzodioxin1.0 (b) 1,2,3,7,8-pentachlorodibenzodioxin0.5 (c) 1,2,3,4,7,8-hexachlorodibenzodioxin0.1 (d) 1,2,3,7,8,9-hexachlorodibenzodioxin0.1 (e) 1,2,3,6,7,8-hexachlorodibenzodioxin0.1 (f) 1,2,3,4,6,7,8-heptachlorodibenzodioxin0.01 (g) octachlorodibenzodioxin0.001 (h) 2,3,7,8-tetrachlorodibenzofuran0.1 (i) 2,3,4,7,8-pentachlorodibenzofuran0.5 (j) 1,2,3,7,8-pentachlorodibenzofuran0.05 (k) 1,2,3,4,7,8-hexachlorodibenzofuran0.1 (l) 1,2,3,7,8,9-hexachlorodibenzofuran0.1 (m) 1,2,3,6,7,8-hexachlorodibenzofuran0.1 (n) 2,3,4,6,7,8-hexachlorodibenzofuran0.1 (o) 1,2,3,4,6,7,8-heptachlorodibenzofuran0.01 (p) 1,2,3,4,7,8,9-heptachlorodibenzofuran0.01 (q) octachlorodibenzofuran0.001
7	HAZ7	Circuit boards and display devices and any equipment that contains them.
8	HAZ8	Non-rechargeable and rechargeable cells and batteries.

SCHEDULE 7(Paragraphs 2(1)(c) and 4(1)(c), clause 78(1)(a)(iii)(I) and Schedules 3 and 4)

Environmentally Hazardous Substances

Item	Code	CAS Registry NumberFootnote for Environmentally Hazardous Substances^a	Substance	Concentration by Mass (mg/kg)
	Column 1	Column 2	Column 3	Column 4
1	E001	75-07-0	Acetaldehyde	100.0
2	E002	75-39-8	Acetaldehyde ammonia	100.0
3	E003	64-19-7	Acetic acid	100.0
4	E004	108-24-7	Acetic anhydride	100.0
5	E005	75-86-5Footnote for Environmentally Hazardous Substances^b	Acetonecyanohydrin	100.0
6	E006	506-96-7	Acetyl bromide	100.0
7	E007	75-36-5Footnote for Environmentally Hazardous Substances^b	Acetyl chloride	100.0
8	E008	107-02-8	Acrolein, stabilized	100.0
9	E009	107-13-1	Acrylonitrile, stabilized	100.0
10	E010	124-04-9	Adipic acid	100.0
11	E011	NA	Allethrin	100.0
12	E012	107-18-6	Allyl alcohol	100.0
13	E013	107-05-1	Allyl chloride	100.0
14	E014	10043-01-3	Aluminum sulphate	100.0
15	E015	123-00-2	N-Aminopropylmorpholine	100.0
16	E016	7664-41-7	Ammonia; Ammonia solutions	100.0
17	E018	631-61-8	Ammonium acetate	100.0
18	E019	1863-63-4	Ammonium benzoate	100.0
19	E020	1066-33-7	Ammonium bicarbonate	100.0
20	E021	10192-30-0	Ammonium bisulphite	100.0
21	E022	1111-78-0	Ammonium carbamate	100.0
22	E023	506-87-6	Ammonium carbonate	100.0
23	E024	12125-02-9	Ammonium chloride	100.0
24	E025	3012-65-5	Ammonium citrate, dibasic	100.0
25	E026	1113-38-8	Ammonium oxalate	100.0
26	E027	7773-06-1	Ammonium sulphamate	100.0
27	E028	12135-76-1	Ammonium sulphide	100.0
28	E029	3164-29-2	Ammonium tartrate	100.0
29	E030	1762-95-4	Ammonium thiocyanate	100.0
30	E031	7783-18-8	Ammonium thiosulphate	100.0
31	E032	NA	Amyl acetates	100.0
32	E033	62-53-3	Aniline	100.0
33	E034	7647-18-9Footnote for Environmentally Hazardous Substances^b	Antimony pentachloride	100.0
34	E035	NA	Antimony potassium tartrate	100.0
35	E036	7789-61-9Footnote for Environmentally Hazardous Substances^b	Antimony tribromide	100.0
36	E037	10025-91-9Footnote for Environmentally Hazardous Substances^b	Antimony trichloride	100.0
37	E038	1309-64-4Footnote for Environmentally Hazardous Substances^b	Antimony trioxide	100.0
38	E039	92-87-5	Benzidine	100.0
39	E040	65-85-0	Benzoic acid	100.0
40	E041	100-47-0	Benzonitrile	100.0
41	E042	98-88-4	Benzoyl chloride	100.0
42	E043	100-44-7	Benzyl chloride	100.0
43	E044	7787-47-5Footnote for Environmentally Hazardous Substances^b	Beryllium chloride	100.0
44	E045	NA	Butyl acetates	100.0
45	E046	109-73-9	n-Butylamine	100.0
46	E047	84-74-2	n-Butyl phthalate	100.0
47	E048	7778-54-3Footnote for Environmentally Hazardous Substances^b	Calcium hypochlorite	100.0
48	E049	133-06-2	Captan	100.0
49	E050	75-15-0	Carbon disulphide	100.0
50	E051	143-50-0	Chlordecone	100.0
51	E052	95-57-8	2-Chlorophenol	100.0
52	E053	7790-94-5	Chlorosulphonic acid (with or without sulphur trioxide)	100.0
53	E054	7789-43-7Footnote for Environmentally Hazardous Substances^b	Cobaltous bromide	100.0
54	E055	544-18-3Footnote for Environmentally Hazardous Substances^b	Cobaltous formate	100.0
55	E056	14017-41-5Footnote for Environmentally Hazardous Substances^b	Cobaltous sulphamate	100.0
56	E057	NA	Copper-based pesticides (all forms)	100.0
57	E058	NA	Copper chlorides	100.0
58	E059	56-72-4	Coumaphos	100.0
59	E060	NA	Creosote	100.0
60	E061	4170-30-3	Crotonaldehyde	100.0
61	E062	142-71-2Footnote for Environmentally Hazardous Substances^b	Cupric acetate	100.0
62	E063	814-91-5	Cupric oxalate	100.0
63	E064	7758-98-7Footnote for Environmentally Hazardous Substances^b	Cupric sulphate	100.0
64	E065	10380-29-7	Cupric sulphate, ammoniated	100.0
65	E066	815-82-7	Cupric tartrate	100.0
66	E067	110-82-7	Cyclohexane	100.0
67	E068	1194-65-6	Dichlobenil	100.0
68	E069	117-80-6	Dichlone	100.0
69	E070	72-54-8	1,1-Dichloro-2,2-bis(p-chlorophenyl)ethane	100.0
70	E071	50-29-3	Dichlorodiphenyltrichloroethane	100.0
71	E072	111-44-4	2,2-Dichloroethyl ether	100.0
72	E073	NA	Dichloropropenes	100.0
73	E074	75-99-0	2,2-Dichloropropionic acid	100.0
74	E075	62-73-7	Dichlorvos	100.0
75	E076	115-32-2	Dicofol	100.0
76	E077	109-89-7	Diethylamine	100.0
77	E078	124-40-3	Dimethylamine	100.0
78	E079	NA	Dinitrobenzenes	100.0
79	E080	NA	Dinitrophenols	100.0
80	E081	NA	Dinitrotoluenes (excluding 2,4-dinitrotoluene)	100.0
81	E082	298-04-4	Disulfoton	100.0
82	E083	115-29-7	Endosulfan	100.0
83	E084	106-89-8	Epichlorohydrin	100.0
84	E085	563-12-2	Ethion	100.0
85	E086	100-41-4	Ethylbenzene	100.0
86	E087	107-15-3	Ethylenediamine	100.0
87	E088	60-00-4	Ethylenediaminetetraacetic acid	100.0
88	E089	106-93-4	Ethylene dibromide	100.0
89	E090	107-06-2	Ethylene dichloride	100.0
90	E091	1185-57-5Footnote for Environmentally Hazardous Substances^b	Ferric ammonium citrate	100.0
91	E092	14221-47-7Footnote for Environmentally Hazardous Substances^b	Ferric ammonium oxalate	100.0
92	E093	7705-08-0Footnote for Environmentally Hazardous Substances^b	Ferric chloride	100.0
93	E094	10421-48-4Footnote for Environmentally Hazardous Substances^b	Ferric nitrate	100.0
94	E095	10028-22-5Footnote for Environmentally Hazardous Substances^b	Ferric sulphate	100.0
95	E096	10045-89-3Footnote for Environmentally Hazardous Substances^b	Ferrous ammonium sulphate	100.0
96	E097	7758-94-3Footnote for Environmentally Hazardous Substances^b	Ferrous chloride	100.0
97	E098	7720-78-7Footnote for Environmentally Hazardous Substances^b	Ferrous sulphate	100.0
98	E099	50-00-0	Formaldehyde	100.0
99	E100	64-18-6	Formic acid	100.0
100	E101	110-17-8	Fumaric acid	100.0
101	E102	98-01-1	Furfural	100.0
102	E103	77-47-4	Hexachlorocyclopentadiene	100.0
103	E104	110-19-0	Isobutyl acetate	100.0
104	E105	78-81-9	Isobutylamine	100.0
105	E106	79-31-2	Isobutyric acid	100.0
106	E107	78-79-5	Isoprene	100.0
107	E108	115-32-2	Kelthane	100.0
108	E109	2032-65-7	Mercaptodimethur	100.0
109	E110	NA	Methyl bromide and ethylene dibromide mixtures	100.0
110	E111	80-62-6	Methyl methacrylate	100.0
111	E112	74-89-5	Methylamine	100.0
112	E113	7786-34-7	Mevinphos	100.0
113	E114	315-18-4	Mexacarbate	100.0
114	E115	300-76-5	Naled	100.0
115	E116	91-20-3	Naphthalene	100.0
116	E117	1338-24-5	Naphthenic acid	100.0
117	E118	15699-18-0Footnote for Environmentally Hazardous Substances^b	Nickel ammonium sulphate	100.0
118	E119	NA	Nickel chlorides	100.0
119	E120	NA	Nickel hydroxides	100.0
120	E121	NA	Nickel sulphates	100.0
121	E122	NA	Nitrophenols (o-, m-, p-)	100.0
122	E123	NA	Nitrotoluenes, (o-, m-, p-)	100.0
123	E124	NA	Organotin compounds (all forms)	100.0
124	E126	NA	Oxalates, water soluble	100.0
125	E127	30525-89-4	Paraformaldehyde	100.0
126	E128	2275-14-1	Phencapton	100.0
127	E129	108-95-2	Phenol	100.0
128	E130	NA	Phosphorus	100.0
129	E131	10025-87-3	Phosphorus oxychloride	100.0
130	E132	1314-80-3	Phosphorus pentasulphide	100.0
131	E133	7719-12-2	Phosphorus trichloride	100.0
132	E134	1336-36-3	Polychlorinated biphenyls	50.0
133	E135	7722-64-7	Potassium permanganate	100.0
134	E136	2312-35-8	Propargite	100.0
135	E137	79-09-4	Propionic acid	100.0
136	E138	123-62-6	Propionic anhydride	100.0
137	E139	78-87-5	Propylene dichloride	100.0
138	E140	75-56-9	Propylene oxide	100.0
139	E141	NA	Pyrethrins	100.0
140	E142	91-22-5	Quinoline	100.0
141	E143	108-46-3	Resorcinol	100.0
142	E144	7761-88-8Footnote for Environmentally Hazardous Substances^b	Silver nitrate	100.0
143	E145	7631-90-5Footnote for Environmentally Hazardous Substances^b	Sodium bisulphite; Sodium hydrogen sulphite	100.0
144	E146	NA	Sodium dodecylbenzene sulphonate (branched chain)	100.0
145	E148	16721-80-5Footnote for Environmentally Hazardous Substances^b	Sodium hydrosulphide	100.0
146	E149	124-41-4Footnote for Environmentally Hazardous Substances^b	Sodium methylate	100.0
147	E150	7558-79-4Footnote for Environmentally Hazardous Substances^b	Sodium phosphate, dibasic	100.0
148	E151	7601-54-9Footnote for Environmentally Hazardous Substances^b	Sodium phosphate, tribasic	100.0
149	E152	57-24-9Footnote for Environmentally Hazardous Substances^b	Strychnine or Strychnine mixtures	100.0
150	E153	NA	Strychnine salts or Strychnine salt mixtures	100.0
151	E154	100-42-5	Styrene	100.0
152	E155	10025-67-9Footnote for Environmentally Hazardous Substances^b	Sulphur monochloride	100.0
153	E156	NA	Tetrachloroethanes	100.0
154	E157	107-49-3	Tetraethyl Pyrophosphate	100.0
155	E158	NA	Thallium sulphates	100.0
156	E159	137-26-8	Thiram	100.0
157	E160	NA	Titanium sulphates	100.0
158	E161	108-88-3	Toluene	100.0
159	E162	NA	Triazine Pesticides	100.0
160	E163	52-68-6	Trichlorphon	100.0
161	E164	121-44-8	Triethylamine	100.0
162	E165	75-50-3	Trimethylamine	100.0
163	E166	1314-62-1Footnote for Environmentally Hazardous Substances^b	Vanadium pentoxide, non-fused form	100.0
164	E167	NA	Vanadyl sulphates	100.0
165	E168	108-05-4	Vinyl acetate	100.0
166	E169	NA	Xylenes	100.0
167	E170	NA	Xylenols	100.0
168	E171	557-34-6Footnote for Environmentally Hazardous Substances^b	Zinc acetate	100.0
169	E172	52628-25-8Footnote for Environmentally Hazardous Substances^b	Zinc ammonium chloride	100.0
170	E173	3486-35-9Footnote for Environmentally Hazardous Substances^b	Zinc carbonate	100.0
171	E174	7646-85-7Footnote for Environmentally Hazardous Substances^b	Zinc chloride	100.0
172	E175	557-41-5Footnote for Environmentally Hazardous Substances^b	Zinc formate	100.0
173	E176	127-82-2	Zinc phenolsulphonate	100.0
174	E177	1314-84-7Footnote for Environmentally Hazardous Substances^b	Zinc phosphide	100.0
175	E178	7733-02-0Footnote for Environmentally Hazardous Substances^b	Zinc sulphate	100.0
176	E179	14644-61-2Footnote for Environmentally Hazardous Substances^b	Zirconium sulphate	100.0

Return to footnote ^aCAS registry numbers are provided for reference purposes only. They do not form part of these Regulations and may be amended without the need to amend these Regulations.
Return to footnote ^bCAS registry numbers are provided for parent or main compound only.

SCHEDULE 8(Paragraphs 2(1)(e) and 4(1)(e), clause 78(1)(a)(iii)(I) and Schedules 3 and 4)

PART 1

Acute Hazardous Waste and Hazardous Recyclable Material Chemicals

Item	Code	CAS Registry NumberFootnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^a	Description of Hazardous Waste or Hazardous Recyclable Material
	Column 1	Column 2	Column 3
1	P001	81-81-2Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenylbutyl)-, and salts, when present at concentrations greater than 0.3%; Warfarin, and salts, when present at concentrations greater than 0.3%
2	P002	591-08-2	1-Acetyl-2-thiourea; Acetamide, N-(aminothioxomethyl)-
3	P003	107-02-8	2-Propenal; Acrolein
4	P004	309-00-2	1,4:5,8-Dimethanonaphthalene, 1,2,3,4,10,10-hexachloro-1,4,4a,5,8,8a-hexahydro-, (1alpha,4alpha,4abeta,5alpha,8alpha,8abeta)-; Aldrin
5	P005	107-18-6	2-Propen-1-ol; Allyl alcohol
6	P006	20859-73-8	Aluminum phosphide
7	P007	2763-96-4	3(2H)-Isoxazolone, 5-(aminomethyl)-; 5-(Aminomethyl)-3-isoxazolol
8	P008	504-24-5	4-Aminopyridine; 4-Pyridinamine
9	P009	131-74-8	Ammonium picrate; Phenol, 2,4,6-trinitro-, ammonium salt
10	P010	7778-39-4Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Arsenic acid (H₃AsO₄)
11	P011	1303-28-2Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Arsenic oxide (As₂O₅); Arsenic pentoxide
12	P012	1327-53-3Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Arsenic oxide (As₂O₃); Arsenic trioxide
13	P013	542-62-1Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Barium cyanide
14	P014	108-98-5	Benzenethiol; Thiophenol
15	P015	7440-41-7	Beryllium powder
16	P016	542-88-1	Dichloromethyl ether; Methane, oxybis[chloro-
17	P017	598-31-2	2-Propanone, 1-bromo-; Bromoacetone
18	P018	357-57-3	Brucine; Strychnidin-10-one, 2,3-dimethoxy-
19	P020	88-85-7	Dinoseb; Phenol, 2-(1-methylpropyl)-4,6-dinitro-
20	P021	592-01-8Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Calcium cyanide (Ca(CN)₂)
21	P022	75-15-0	Carbon disulfide
22	P023	107-20-0	Acetaldehyde, chloro-; Chloroacetaldehyde
23	P024	106-47-8	Benzenamine, 4-chloro-; p-Chloroaniline
24	P026	5344-82-1	1-(o-Chlorophenyl)thiourea; Thiourea, (2-chlorophenyl)-
25	P027	542-76-7	3-Chloropropionitrile; Propanenitrile, 3-chloro-
26	P028	100-44-7	Benzene, (chloromethyl)-; Benzyl chloride
27	P029	544-92-3Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Copper cyanide (Cu(CN))
28	P030	NA	Cyanides (soluble cyanide salts), not otherwise specified
29	P031	460-19-5	Cyanogen; Ethanedinitrile
30	P033	506-77-4	Cyanogen chloride ((CN)Cl)
31	P034	131-89-5	2-Cyclohexyl-4,6-dinitrophenol; Phenol, 2-cyclohexyl-4,6-dinitro-
32	P036	696-28-6Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Arsonous dichloride, phenyl-; Dichlorophenylarsine
33	P037	60-57-1	1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha,2beta,2aalpha,3beta,6beta,6aalpha,7beta,7aalpha)-; Dieldrin
34	P038	692-42-2Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Arsine, diethyl-; Diethylarsine
35	P039	298-04-4	Disulfoton; Phosphorodithioic acid, O,O-diethyl S-[2-(ethylthio)ethyl] ester
36	P040	297-97-2	O,O-Diethyl O-pyrazinyl phosphorothioate; Phosphorothioic acid, O,O-diethyl O-pyrazinyl ester
37	P041	311-45-5	Diethyl p-nitrophenyl phosphate; Phosphoric acid, diethyl 4-nitrophenyl ester
38	P042	51-43-4	1,2-Benzenediol,4-[1-hydroxy-2-(methylamino)ethyl]-; Epinephrine
39	P043	55-91-4	DFP; Diisopropyl fluorophosphate Phosphorofluoridic acid, bis(1-methylethyl) ester
40	P044	60-51-5	Dimethoate;
			Phosphorodithioic acid, O,O-dimethyl S-[2-(methylamino)-2-oxoethyl] ester
41	P045	39196-18-4	2-Butanone, 3,3-dimethyl-1-(methylthio)-, O-[(methylamino)carbonyl]oxime; Thiofanox
42	P046	122-09-8	alpha,alpha-Dimethylphenethylamine; Benzeneethanamine, alpha,alpha-dimethyl-
43	P047	534-52-1Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	4,6-Dinitro-o-cresol, and salts; Phenol, 2-methyl-4,6-dinitro-, and salts
44	P048	51-28-5	2,4-Dinitrophenol; Phenol, 2,4-dinitro-
45	P049	541-53-7	Dithiobiuret; Thioimidodicarbonic diamide ([(H₂N)C(S)]₂NH)
46	P050	115-29-7	6,9-Methano-2,4,3-benzodioxathiepin, 6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-, 3-oxide; Endosulfan
47	P051	72-20-8Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	2,7:3,6-Dimethanonaphth[2,3-b]oxirene, 3,4,5,6,9,9-hexachloro-1a,2,2a,3,6,6a,7,7a-octahydro-, (1aalpha,2beta,2abeta,3alpha,6alpha,6abeta,7beta,7aalpha)-, and metabolites; Endrin, and metabolites
48	P054	151-56-4	Aziridine; Ethyleneimine
49	P056	7782-41-4	Fluorine
50	P057	640-19-7	Acetamide, 2-fluoro-; Fluoroacetamide
51	P058	62-74-8	Acetic acid, fluoro-, sodium salt; Fluoroacetic acid, sodium salt
52	P059	76-44-8	4,7-Methano-1H-indene, 1,4,5,6,7,8,8-heptachloro-3a,4,7,7a-tetrahydro-; Heptachlor
53	P060	465-73-6	1,4:5,8-Dimethanonaphthalene, 1,2,3,4,10,10-hexachloro-1,4,4a,5,8,8a-hexahydro-, (1alpha,4alpha,4abeta,5beta,8beta,8abeta)-; Isodrin
54	P062	757-58-4	Hexaethyl tetraphosphate; Tetraphosphoric acid, hexaethyl ester
55	P063	74-90-8	Hydrocyanic acid; Hydrogen cyanide
56	P064	624-83-9	Methane, isocyanato-; Methyl isocyanate
57	P065	628-86-4	Fulminic acid, mercury(2+) salt; Mercury fulminate
58	P066	16752-77-5	Ethanimidothioic acid, N-[[(methylamino)carbonyl]oxy]-, methyl ester; Methomyl
59	P067	75-55-8	1,2-Propylenimine; Aziridine, 2-methyl-
60	P068	60-34-4	Hydrazine, methyl-; Methyl hydrazine
61	P069	75-86-5	2-Methyllactonitrile; Propanenitrile, 2-hydroxy-2-methyl-
62	P070	116-06-3	Aldicarb; Propanal, 2-methyl-2-(methylthio)-, O-[(methylamino)carbonyl]oxime
63	P071	298-00-0	Methyl parathion; Phosphorothioic acid, O,O-dimethyl O-(4-nitrophenyl) ester
64	P072	86-88-4	alpha-Naphthylthiourea; Thiourea, 1-naphthalenyl-
65	P073	13463-39-3Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Nickel carbonyl (Ni(CO)₄), (T-4)-
66	P074	557-19-7Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Nickel cyanide (Ni(CN)₂)
67	P075	54-11-5Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Nicotine, and salts; Pyridine, 3-(1-methyl-2-pyrrolidinyl)-, (S)-, and salts
68	P076	10102-43-9	Nitric oxide; Nitrogen oxide (NO)
69	P077	100-01-6	Benzenamine, 4-nitro-; p-Nitroaniline
70	P078	10102-44-0	Nitrogen dioxide; Nitrogen oxide (NO₂)
71	P081	55-63-0	1,2,3-Propanetriol, trinitrate; Nitroglycerine
72	P082	62-75-9	Methanamine, N-methyl-N-nitroso-; N-Nitrosodimethylamine
73	P084	4549-40-0	N-Nitrosomethylvinylamine; Vinylamine, N-methyl-N-nitroso-
74	P085	152-16-9	Diphosphoramide, octamethyl-; Octamethylpyrophosphoramide
75	P087	20816-12-0Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Osmium oxide (OsO4), (T-4)-; Osmium tetroxide
76	P088	145-73-3	7-Oxabicyclo[2.2.1]heptane-2,3-dicarboxylic acid; Endothall
77	P089	56-38-2	Parathion; Phosphorothioic acid, O,O-diethyl O-(4-nitrophenyl) ester
78	P092	62-38-4	Mercury, (acetato-O)phenyl-; Phenylmercury acetate
79	P093	103-85-5	Phenylthiourea; Thiourea, phenyl-
80	P094	298-02-2	Phorate; Phosphorodithioic acid, O,O-diethyl S-[(ethylthio)methyl] ester
81	P095	75-44-5	Carbonic dichloride; Phosgene
82	P096	7803-51-2	Hydrogen phosphide; Phosphine
83	P097	52-85-7	Famphur; Phosphorothioic acid, O-[4-[(dimethylamino)sulfonyl]phenyl] O,O- dimethyl ester
84	P098	151-50-8Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Potassium cyanide (K(CN))
85	P099	506-61-6Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Argentate(1-), bis(cyano-C)-, potassium; Potassium silver cyanide
86	P101	107-12-0	Ethyl cyanide; Propanenitrile
87	P102	107-19-7	2-Propyn-1-ol; Propargyl alcohol
88	P103	630-10-4	Selenourea
89	P104	506-64-9Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Silver cyanide (Ag(CN))
90	P105	26628-22-8Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Sodium azide
91	P106	143-33-9Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Sodium cyanide (Na(CN))
92	P108	57-24-9Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Strychnidin-10-one, and salts; Strychnine, and salts
93	P109	3689-24-5	Tetraethyl dithiopyrophosphate; Thiodiphosphoric acid, tetraethyl ester
94	P110	78-00-2	Plumbane, tetraethyl-; Tetraethyl lead
95	P111	107-49-3	Diphosphoric acid, tetraethyl ester; Tetraethyl pyrophosphate
96	P112	509-14-8	Methane, tetranitro-; Tetranitromethane
97	P113	1314-32-5Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Thallic oxide; Thallium oxide (Tl₂O₃)
98	P114	12039-52-0Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Selenious acid, dithallium(1+) salt; Thallium(I) selenite
99	P115	7446-18-6Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Sulfuric acid, dithallium(1+) salt; Thallium(I) sulfate
100	P116	79-19-6	Hydrazinecarbothioamide; Thiosemicarbazide
101	P118	75-70-7	Methanethiol, trichloro-; Trichloromethanethiol
102	P119	7803-55-6Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Ammonium vanadate; Vanadic acid, ammonium salt
103	P120	1314-62-1Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Vanadium oxide (V₂O₅); Vanadium pentoxide
104	P121	557-21-1Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Zinc cyanide (Zn(CN)₂)
105	P122	1314-84-7Footnote for PART 1 Acute Hazardous Waste and Hazardous Recyclable Material Chemicals^b	Zinc phosphide (Zn₃P₂), when present at concentrations greater than 10%
106	P123	8001-35-2	Toxaphene
107	P127	1563-66-2	7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-, methylcarbamate; Carbofuran
108	P128	315-18-4	Mexacarbate; Phenol, 4-(dimethylamino)-3,5-dimethyl-, methylcarbamate
109	P185	26419-73-8	1,3-Dithiolane-2-carboxaldehyde, 2,4-dimethyl-, O-[(methylamino)carbonyl]oxime; Tirpate
110	P188	57-64-7	Benzoic acid, 2-hydroxy-, compd. with (3aS-cis)-1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethylpyrrolo[2,3-b]indol-5-yl methylcarbamate ester (1:1); Physostigmine salicylate
111	P189	55285-14-8	Carbamic acid, [(dibutylamino)thio]methyl-, 2,3-dihydro-2,2-dimethyl-7-benzofuranyl ester; Carbosulfan
112	P190	1129-41-5	Carbamic acid, methyl-, 3-methylphenyl ester; Metolcarb
113	P191	644-64-4	Carbamic acid, dimethyl-, 1-[(dimethylamino)carbonyl]-5-methyl-1H-pyrazol-3-yl ester; Dimetilan
114	P192	119-38-0	Carbamic acid, dimethyl-, 3-methyl-1-(1-methylethyl)-1H-pyrazol-5-yl ester; Isolan
115	P194	23135-22-0	Ethanimidothioic acid, 2-(dimethylamino)-N-[[(methylamino)carbonyl]oxy]-2-oxo-, methyl ester; Oxamyl
116	P196	15339-36-3	Manganese, bis(dimethylcarbamodithioato-S,S′)-; Manganese dimethyldithiocarbamate
117	P197	17702-57-7	Formparanate; Methanimidamide, N,N-dimethyl-N′-[2-methyl-4-[[(methylamino)carbonyl]oxy]phenyl]-
118	P198	23422-53-9	Formetanate hydrochloride; Methanimidamide, N,N-dimethyl-N’-[3-[[(methylamino)carbonyl]oxy]phenyl]-, monohydrochloride
119	P199	2032-65-7	Methiocarb; Phenol, 3,5-dimethyl-4-(methylthio)-, methylcarbamate
120	P201	2631-37-0	Phenol, 3-methyl-5-(1-methylethyl)-, methylcarbamate; Promecarb
121	P202	64-00-6	3-Isopropylphenyl N-methylcarbamate; m-Cumenyl methylcarbamate; Phenol, 3-(1-methylethyl)-, methylcarbamate
122	P203	1646-88-4	Aldicarb sulfone; Propanal, 2-methyl-2-(methyl-sulfonyl)-, O-[(methylamino)carbonyl]oxime
123	P204	57-47-6	Physostigmine; Pyrrolo[2,3-b]indol-5-ol, 1,2,3,3a,8,8a-hexahydro-1,3a,8- trimethyl-, methylcarbamate (ESTER), (3aS-cis)-
124	P205	137-30-4	Zinc, bis(dimethylcarbamodithioato-S,S′)-,; Ziram

Return to footnote ^aCAS registry numbers are provided for reference purposes only. They do not form part of these Regulations and may be amended without the need to amend these Regulations.
Return to footnote ^bCAS registry numbers are provided for parent or main compound only.

PART 2

Hazardous Waste and Hazardous Recyclable Material Chemicals

Item	Code	CAS Registry NumberFootnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^a	Description of Hazardous Waste or Hazardous Recyclable Material
	Column 1	Column 2	Column 3
1	T140	58-90-2	2,3,4,6-Tetrachlorophenol; Phenol, 2,3,4,6-tetrachloro-
2	T140	93-76-5	2,4,5-T; Acetic acid, (2,4,5-trichlorophenoxy)-
3	T140	95-95-4	2,4,5-Trichlorophenol; Phenol, 2,4,5-trichloro-
4	T140	88-06-2	2,4,6-Trichlorophenol; Phenol, 2,4,6-trichloro-
5	T140	87-86-5	Pentachlorophenol; Phenol, pentachloro-
6	T140	93-72-1	Propanoic acid, 2-(2,4,5-trichlorophenoxy)-; Silvex (2,4,5-TP)
7	U001	75-07-0	Acetaldehyde; Ethanal
8	U002	67-64-1	2-Propanone; Acetone
9	U003	75-05-8	Acetonitrile
10	U004	98-86-2	Acetophenone; Ethanone, 1-phenyl-
11	U005	53-96-3	2-Acetylaminofluorene; Acetamide, N-9H-fluoren-2-yl-
12	U006	75-36-5	Acetyl chloride
13	U007	79-06-1	2-Propenamide; Acrylamide
14	U008	79-10-7	2-Propenoic acid; Acrylic acid
15	U009	107-13-1	2-Propenenitrile; Acrylonitrile
16	U010	50-07-7	Azirino[2′,3′:3,4]pyrrolo[1,2-a]indole-4,7-dione, 6-amino-8-[[(aminocarbonyl)oxy]methyl]-1,1a,2,8,8a,8b-hexahydro-8a-methoxy-5-methyl-, [1aS-(1aalpha,8beta,8aalpha,8balpha)]-; Mitomycin C
17	U011	61-82-5	1H-1,2,4-Triazol-3-amine; Amitrole
18	U012	62-53-3	Aniline; Benzenamine
19	U014	492-80-8	Auramine; Benzenamine, 4,4′-carbonimidoylbis[N,N-dimethyl-
20	U015	115-02-6	Azaserine; L-Serine, diazoacetate
21	U016	225-51-4	Benz[c]acridine
22	U017	98-87-3	Benzal chloride; Benzene, (dichloromethyl)-
23	U018	56-55-3	Benz[a]anthracene
24	U019	71-43-2	Benzene
25	U020	98-09-9	Benzenesulfonic acid chloride; Benzenesulfonyl chloride
26	U021	92-87-5	[1′,1′-Biphenyl]-4,4′-diamine; Benzidine
27	U022	50-32-8	Benzo[a]pyrene
28	U023	98-07-7	Benzene, (trichloromethyl)-; Benzotrichloride
29	U024	111-91-1	Bis(2-chloroethoxy)-methane; Ethane, 1,1′-[methylenebis(oxy)]bis[2-chloro-
30	U025	111-44-4	Dichloroethyl ether; Ethane, 1,1′-oxybis[2-chloro-
31	U026	494-03-1	2-Naphthalenamine, N,N-bis(2-chloroethyl)-; Chlornaphazin
32	U027	108-60-1	Dichloroisopropyl ether; Propane, 2,2′-oxybis[1-chloro-
33	U028	117-81-7	1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl) ester; Diethylhexyl phthalate
34	U029	74-83-9	Methane, bromo-; Methyl bromide
35	U030	101-55-3	4-Bromophenyl phenyl ether; Benzene, 1-bromo-4-phenoxy-
36	U031	71-36-3	1-Butanol; n-Butyl alcohol
37	U032	13765-19-0	Calcium chromate; Chromic acid (H₂CrO₄), calcium salt
38	U033	353-50-4	Carbon oxyfluoride; Carbonic difluoride
39	U034	75-87-6	Acetaldehyde, trichloro-; Chloral
40	U035	305-03-3	Benzenebutanoic acid, 4-[bis(2-chloroethyl)amino]-; Chlorambucil
41	U036	57-74-9	4,7-Methano-1H-indene, 1,2,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro-; Chlordane, alpha and gamma isomers
42	U037	108-90-7	Benzene, chloro-; Chlorobenzene
43	U038	510-15-6	Benzeneacetic acid, 4-chloro-alpha-(4-chlorophenyl)-alpha-hydroxy-, ethyl ester; Chlorobenzilate
44	U039	59-50-7	p-Chloro-m-cresol; Phenol, 4-chloro-3-methyl-
45	U041	106-89-8	Epichlorohydrin; Oxirane, (chloromethyl)-
46	U042	110-75-8	2-Chloroethyl vinyl ether; Ethene, (2-chloroethoxy)-
47	U043	75-01-4	Ethene, chloro-; Vinyl chloride
48	U044	67-66-3	Chloroform; Methane, trichloro-
49	U045	74-87-3	Methane, chloro-; Methyl chloride
50	U046	107-30-2	Chloromethyl methyl ether; Methane, chloromethoxy-
51	U047	91-58-7	beta-Chloronaphthalene; Naphthalene, 2-chloro-
52	U048	95-57-8	o-Chlorophenol; Phenol, 2-chloro-
53	U049	3165-93-3	4-Chloro-o-toluidine, hydrochloride; Benzenamine, 4-chloro-2-methyl-, hydrochloride
54	U050	218-01-9	Chrysene
55	U051	NA	Creosote
56	U052	1319-77-3	Cresol (cresylic acid); Phenol, methyl-
57	U053	4170-30-3	2-Butenal; Crotonaldehyde
58	U055	98-82-8	Benzene, (1-methylethyl)-; Cumene
59	U056	110-82-7	Benzene, hexahydro-; Cyclohexane
60	U057	108-94-1	Cyclohexanone
61	U058	50-18-0	2H-1,3,2-Oxazaphosphorin-2-amine, N,N-bis(2-chloroethyl)tetrahydro-, 2-oxide; Cyclophosphamide
62	U059	20830-81-3	5,12-Naphthacenedione, 8-acetyl-10-[(3-amino-2,3,6-trideoxy-alpha-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-, (8S-cis)-; Daunomycin
63	U060	72-54-8	Benzene, 1,1′-(2,2-dichloroethylidene)bis[4-chloro-; DDD
64	U061	50-29-3	Benzene, 1,1′-(2,2,2-trichloroethylidene)bis[4-chloro-; DDT
65	U062	2303-16-4	Carbamothioic acid, bis(1-methylethyl)-, S-(2,3-dichloro-2-propenyl) ester; Diallate
66	U063	53-70-3	Dibenz[a,h]anthracene
67	U064	189-55-9	Benzo[rst]pentaphene; Dibenzo[a,i]pyrene
68	U066	96-12-8	1,2-Dibromo-3-chloropropane; Propane, 1,2-dibromo-3-chloro-
69	U067	106-93-4	Ethane, 1,2-dibromo-; Ethylene dibromide
70	U068	74-95-3	Methane, dibromo-; Methylene bromide
71	U069	84-74-2	1,2-Benzenedicarboxylic acid, dibutyl ester; Dibutyl phthalate
72	U070	95-50-1	Benzene, 1,2-dichloro-; o-Dichlorobenzene
73	U071	541-73-1	Benzene, 1,3-dichloro-; m-Dichlorobenzene
74	U072	106-46-7	Benzene, 1,4-dichloro-; p-Dichlorobenzene
75	U073	91-94-1	[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dichloro-; 3,3′-Dichlorobenzidine
76	U074	764-41-0	1,4-Dichloro-2-butene; 2-Butene, 1,4-dichloro-
77	U075	75-71-8	Dichlorodifluoromethane; Methane, dichlorodifluoro-
78	U076	75-34-3	Ethane, 1,1-dichloro-; Ethylidene dichloride
79	U077	107-06-2	Ethane, 1,2-dichloro-; Ethylene dichloride
80	U078	75-35-4	1,1-Dichloroethylene; Ethene, 1,1-dichloro-
81	U079	156-60-5	1,2-Dichloroethylene; Ethene, 1,2-dichloro-, (E)-
82	U080	75-09-2	Methane, dichloro-; Methylene chloride
83	U081	120-83-2	2,4-Dichlorophenol; Phenol, 2,4-dichloro-
84	U082	87-65-0	2,6-Dichlorophenol; Phenol, 2,6-dichloro-
85	U083	78-87-5	Propane, 1,2-dichloro-; Propylene dichloride
86	U084	542-75-6	1,3-Dichloropropene; 1-Propene, 1,3-dichloro-
87	U085	1464-53-5	1,2:3,4-Diepoxybutane; 2,2³-Bioxirane
88	U086	1615-80-1	Hydrazine, 1,2-diethyl-; N,N′-Diethylhydrazine
89	U087	3288-58-2	O,O-Diethyl S-methyl dithiophosphate; Phosphorodithioic acid, O,O-diethyl S-methyl ester
90	U088	84-66-2	1,2-Benzenedicarboxylic acid, diethyl ester; Diethyl phthalate
91	U089	56-53-1	Diethylstilbestrol; Phenol, 4,4′-(1,2-diethyl-1,2-ethenediyl)bis-, (E)-
92	U090	94-58-6	1,3-Benzodioxole, 5-propyl-; Dihydrosafrole
93	U091	119-90-4	[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dimethoxy-; 3,3′-Dimethoxybenzidine
94	U092	124-40-3	Dimethylamine; Methanamine, N-methyl-
95	U093	60-11-7	Benzenamine, N,N-dimethyl-4-(phenylazo)-; p-Dimethylaminoazobenzene
96	U094	57-97-6	7,12-Dimethylbenz[a]anthracene; Benz[a]anthracene, 7,12-dimethyl-
97	U095	119-93-7	[1,1′-Biphenyl]-4,4′-diamine, 3,3′-dimethyl-; 3,3′-Dimethylbenzidine
98	U096	80-15-9	alpha,alpha-Dimethylbenzyl hydroperoxide; Hydroperoxide, 1-methyl-1-phenylethyl-
99	U097	79-44-7	Carbamic chloride, dimethyl-; Dimethylcarbamoyl chloride
100	U098	57-14-7	1,1-Dimethylhydrazine; Hydrazine, 1,1-dimethyl-
101	U099	540-73-8	1,2-Dimethylhydrazine; Hydrazine, 1,2-dimethyl-
102	U101	105-67-9	2,4-Dimethylphenol; Phenol, 2,4-dimethyl-
103	U102	131-11-3	1,2-Benzenedicarboxylic acid, dimethyl ester; Dimethyl phthalate
104	U103	77-78-1	Dimethyl sulfate; Sulfuric acid, dimethyl ester
105	U105	121-14-2	2,4-Dinitrotoluene; Benzene, 1-methyl-2,4-dinitro-
106	U106	606-20-2	2,6-Dinitrotoluene; Benzene, 2-methyl-1,3-dinitro-
107	U107	117-84-0	1,2-Benzenedicarboxylic acid, dioctyl ester; Di-n-octyl phthalate
108	U108	123-91-1	1,4-Diethylene oxide; 1,4-Dioxane
109	U109	122-66-7	1,2-Diphenylhydrazine; Hydrazine, 1,2-diphenyl-
110	U110	142-84-7	1-Propanamine, N-propyl-; Dipropylamine
111	U111	621-64-7	1-Propanamine, N-nitroso-N-propyl-; Di-n-propylnitrosamine
112	U112	141-78-6	Acetic acid, ethyl ester; Ethyl acetate
113	U113	140-88-5	2-Propenoic acid, ethyl ester; Ethyl acrylate
114	U114	111-54-6Footnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^b	Carbamodithioic acid, 1,2-ethanediylbis-, salts and esters; Ethylenebisdithiocarbamic acid, salts and esters
115	U115	75-21-8	Ethylene oxide; Oxirane
116	U116	96-45-7	2-Imidazolidinethione; Ethylene thiourea
117	U117	60-29-7	Ethane, 1,1′-oxybis-; Ethyl ether
118	U118	97-63-2	2-Propenoic acid, 2-methyl-, ethyl ester; Ethyl methacrylate
119	U119	62-50-0	Ethyl methanesulfonate; Methanesulfonic acid, ethyl ester
120	U120	206-44-0	Fluoranthene
121	U121	75-69-4	Methane, trichlorofluoro-; Trichloromonofluoromethane
122	U122	50-00-0	Formaldehyde
123	U123	64-18-6	Formic acid
124	U124	110-00-9	Furan; Furfuran
125	U125	98-01-1	2-Furancarboxaldehyde; Furfural
126	U126	765-34-4	Glycidylaldehyde; Oxiranecarboxyaldehyde
127	U127	118-74-1	Benzene, hexachloro-; Hexachlorobenzene
128	U128	87-68-3	1,3-Butadiene, 1,1,2,3,4,4-hexachloro-; Hexachlorobutadiene
129	U129	58-89-9	Cyclohexane, 1,2,3,4,5,6-hexachloro-, (1alpha,2alpha,3beta,4alpha,5alpha,6beta)-; Lindane
130	U130	77-47-4	1,3-Cyclopentadiene, 1,2,3,4,5,5-hexachloro-; Hexachlorocyclopentadiene
131	U131	67-72-1	Ethane, hexachloro-; Hexachloroethane
132	U132	70-30-4	Hexachlorophene; Phenol, 2,2′-methylenebis[3,4,6-trichloro-
133	U133	302-01-2	Hydrazine
134	U134	7664-39-3	Hydrofluoric acid; Hydrogen fluoride
135	U135	7783-06-4	Hydrogen sulfide (H₂S)
136	U136	75-60-5	Arsinic acid, dimethyl-; Cacodylic acid
137	U137	193-39-5	Indeno[1,2,3-cd]pyrene
138	U138	74-88-4	Methane, iodo-; Methyl iodide
139	U140	78-83-1	1-Propanol, 2-methyl-; Isobutyl alcohol
140	U141	120-58-1	1,3-Benzodioxole, 5-(1-propenyl)-; Isosafrole
141	U142	143-50-0	1,3,4-Metheno-2H-cyclobuta[cd]pentalen-2-one, 1,1a,3,3a,4,5,5,5a,5b,6-decachlorooctahydro-; Kepone
142	U143	303-34-4	2-Butenoic acid, 2-methyl-, 7-[[2,3-dihydroxy-2-(1-methoxyethyl)-3-methyl-1-oxobutoxy]methyl]-2,3,5,7a-tetrahydro-1H-pyrrolizin-1-yl ester, [1S-[1alpha(Z),7(2S,3R), 7aalpha]]-; Lasiocarpine
143	U144	301-04-2	Acetic acid, lead(2+) salt; Lead acetate
144	U145	7446-27-7Footnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^b	Lead phosphate; Phosphoric acid, lead(2+) salt (2:3)
145	U146	1335-32-6	Lead subacetate; Lead, bis(acetato-O)tetrahydroxytri-
146	U147	108-31-6	2,5-Furandione; Maleic anhydride
147	U148	123-33-1	3,6-Pyridazinedione, 1,2-dihydro-; Maleic hydrazide
148	U149	109-77-3	Malononitrile; Propanedinitrile
149	U150	148-82-3	L-Phenylalanine, 4-[bis(2-chloroethyl)amino]-; Melphalan
150	U151	7439-97-6	Mercury
151	U152	126-98-7	2-Propenenitrile, 2-methyl-; Methacrylonitrile
152	U153	74-93-1	Methanethiol; Thiomethanol
153	U154	67-56-1	Methanol; Methyl alcohol
154	U155	91-80-5	1,2-Ethanediamine, N,N-dimethyl-N′-2-pyridinyl-N′-(2-thienylmethyl)-; Methapyrilene
155	U156	79-22-1	Carbonochloridic acid, methyl ester; Methyl chlorocarbonate
156	U157	56-49-5	3-Methylcholanthrene; Benz[j]aceanthrylene, 1,2-dihydro-3-methyl-
157	U158	101-14-4	4,4′-Methylenebis(2-chloroaniline); Benzenamine, 4,4-methylenebis[2-chloro-
158	U159	78-93-3	2-Butanone; MEK; Methyl ethyl ketone
159	U160	1338-23-4	2-Butanone, peroxide; Methyl ethyl ketone peroxide
160	U161	108-10-1	4-Methyl-2-pentanone; Methyl isobutyl ketone; 2-Pentanone, 4-methyl-
161	U162	80-62-6	2-Propenoic acid, 2-methyl-, methyl ester; Methyl methacrylate
162	U163	70-25-7	Guanidine, N-methyl-N′-nitro-N-nitroso-; MNNG
163	U164	56-04-2	4(1H)-Pyrimidinone, 2,3-dihydro-6-methyl-2-thioxo-; Methylthiouracil
164	U165	91-20-3	Naphthalene
165	U166	130-15-4	1,4-Naphthalenedione; 1,4-Naphthoquinone
166	U167	134-32-7	1-Naphthalenamine; alpha-Naphthylamine
167	U168	91-59-8	2-Naphthalenamine; beta-Naphthylamine
168	U169	98-95-3	Benzene, nitro-; Nitrobenzene
169	U170	100-02-7	Phenol, 4-nitro-; p-Nitrophenol
170	U171	79-46-9	2-Nitropropane; Propane, 2-nitro-
171	U172	924-16-3	1-Butanamine, N-butyl-N-nitroso-; N-Nitrosodi-n-butylamine
172	U173	1116-54-7	Ethanol, 2,2′-(nitrosoimino)bis-; N-Nitrosodiethanolamine
173	U174	55-18-5	Ethanamine, N-ethyl-N-nitroso-; N-Nitrosodiethylamine
174	U176	759-73-9	N-Nitroso-N-ethylurea; Urea, N-ethyl-N-nitroso-
175	U177	684-93-5	N-Nitroso-N-methylurea; Urea, N-methyl-N-nitroso-
176	U178	615-53-2	Carbamic acid, methylnitroso-, ethyl ester; N-Nitroso-N-methylurethane
177	U179	100-75-4	N-Nitrosopiperidine; Piperidine, 1-nitroso-
178	U180	930-55-2	N-Nitrosopyrrolidine; Pyrrolidine, 1-nitroso-
179	U181	99-55-8	5-Nitro-o-toluidine; Benzenamine, 2-methyl-5-nitro-
180	U182	123-63-7	1,3,5-Trioxane, 2,4,6-trimethyl-; Paraldehyde
181	U183	608-93-5	Benzene, pentachloro-; Pentachlorobenzene
182	U184	76-01-7	Ethane, pentachloro-; Pentachloroethane
183	U185	82-68-8	Benzene, pentachloronitro-; PCNB; Pentachloronitrobenzene
184	U186	504-60-9	1,3-Pentadiene; 1-Methylbutadiene
185	U187	62-44-2	Acetamide, N-(4-ethoxyphenyl)-; Phenacetin
186	U188	108-95-2	Phenol
187	U189	1314-80-3Footnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^b	Phosphorus sulfide; Sulfur phosphide
188	U190	85-44-9	1,3-Isobenzofurandione; Phthalic anhydride
189	U191	109-06-8	2-Picoline; Pyridine, 2-methyl-
190	U192	23950-58-5	Benzamide, 3,5-dichloro-N-(1,1-dimethyl-2-propynyl)-; Pronamide
191	U193	1120-71-4	1,2-Oxathiolane, 2,2-dioxide; 1,3-Propane sultone
192	U194	107-10-8	1-Propanamine; n-Propylamine
193	U196	110-86-1	Pyridine
194	U197	106-51-4	2,5-Cyclohexadiene-1,4-dione; p-Benzoquinone
195	U200	50-55-5	Reserpine; Yohimban-16-carboxylic acid, 11,17-dimethoxy-18-[(3,4,5-trimethoxybenzoyl)oxy]-, methyl ester, (3beta,16beta,17alpha,18beta,20alpha)-
196	U201	108-46-3	1,3-Benzenediol; Resorcinol
197	U202	81-07-2Footnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^b	1,2-Benzisothiazol-3(2H)-one, 1,1-dioxide, and salts; Saccharin, and salts
198	U203	94-59-7	1,3-Benzodioxole, 5-(2-propenyl)-; Safrole
199	U204	7783-00-8	Selenious acid; Selenium dioxide
200	U205	7488-56-4Footnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^b	Selenium sulfide (SeS₂₎
201	U206	18883-66-4	D-Glucose, 2-deoxy-2-[[(methylnitrosoamino)carbonyl]amino]-; Glucopyranose, 2-deoxy-2-(3-methyl-3-nitrosoureido)-, D-; Streptozotocin
202	U207	95-94-3	1,2,4,5-Tetrachlorobenzene; Benzene, 1,2,4,5-tetrachloro-
203	U208	630-20-6	1,1,1,2-Tetrachloroethane; Ethane, 1,1,1,2-tetrachloro-
204	U209	79-34-5	1,1,2,2-Tetrachloroethane; Ethane, 1,1,2,2-tetrachloro-
205	U210	127-18-4	Ethene, tetrachloro-; Tetrachloroethylene
206	U211	56-23-5	Carbon tetrachloride; Methane, tetrachloro-
207	U213	109-99-9	Furan, tetrahydro-; Tetrahydrofuran
208	U214	563-68-8	Acetic acid, thallium(1+) salt; Thallium(I) acetate
209	U215	6533-73-9	Carbonic acid, dithallium(1+) salt; Thallium(I) carbonate
210	U216	7791-12-0Footnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^b	Thallium chloride (TlCl); Thallium(I) chloride
211	U217	10102-45-1Footnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^b	Nitric acid, thallium(1+) salt; Thallium(I) nitrate
212	U218	62-55-5	Ethanethioamide; Thioacetamide
213	U219	62-56-6	Thiourea
214	U220	108-88-3	Benzene, methyl-; Toluene
215	U221	25376-45-8	Benzenediamine, ar-methyl-; Toluenediamine
216	U222	636-21-5	Benzenamine, 2-methyl-, hydrochloride; o-Toluidine hydrochloride
217	U223	26471-62-5	Benzene, 1,3-diisocyanatomethyl-; Toluene diisocyanate
218	U225	75-25-2	Bromoform; Methane, tribromo-
219	U226	71-55-6	Ethane, 1,1,1-trichloro-; Methyl chloroform
220	U227	79-00-5	1,1,2-Trichloroethane; Ethane, 1,1,2-trichloro-
221	U228	79-01-6	Ethene, trichloro-; Trichloroethylene
222	U234	99-35-4	1,3,5-Trinitrobenzene; Benzene, 1,3,5-trinitro-
223	U235	126-72-7	1-Propanol, 2,3-dibromo-, phosphate (3:1); Tris(2,3-dibromopropyl) phosphate
224	U236	72-57-1	2,7-Naphthalenedisulfonic acid, 3,3′-[(3,3′-dimethyl-[1,1′-biphenyl]-4,4′-diyl)bis(azo)bis[5-amino-4-hydroxy]-, tetrasodium salt; Trypan blue
225	U237	66-75-1	2,4-(1H,3H)-Pyrimidinedione, 5-[bis(2-chloroethyl)amino]-; Uracil mustard
226	U238	51-79-6	Carbamic acid, ethyl ester; Ethyl carbamate; Urethane
227	U239	1330-20-7	Benzene, dimethyl-; Xylene
228	U240	94-75-7Footnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^b	2,4-D, salts and esters; Acetic acid, (2,4-dichlorophenoxy)-, salts and esters
229	U243	1888-71-7	1-Propene, 1,1,2,3,3,3-hexachloro-; Hexachloropropene
230	U244	137-26-8	Thioperoxydicarbonic diamide [((CH₃)₂N)C(S)]₂S₂, tetramethyl-; Thiram
231	U246	506-68-3Footnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^b	Cyanogen bromide ((CN)Br)
232	U247	72-43-5	Benzene, 1,1-(2,2,2-trichloroethylidene)bis[4-methoxy-; Methoxychlor
233	U248	81-81-2Footnote for PART 2 Hazardous Waste and Hazardous Recyclable Material Chemicals ^b	2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenylbutyl)-, and salts, when present at concentrations of 0.3% or less; Warfarin, and salts, when present at concentrations of 0.3% or less
234	U249	1314-84-7	Zinc phosphide (Zn₃P₂), when present at concentrations of 10% or less
235	U271	17804-35-2	Benomyl; Carbamic acid, [1-[(butylamino)carbonyl]-1H-benzimidazol-2-yl]-, methyl ester
236	U278	22781-23-3	1,3-Benzodioxol-4-ol, 2,2-dimethyl-, methylcarbamate; Bendiocarb
237	U279	63-25-2	1-Naphthalenol, methylcarbamate; Carbaryl
238	U280	101-27-9	Barban; Carbamic acid, (3-chlorophenyl)-, 4-chloro-2-butynyl ester
239	U328	95-53-4	Benzenamine, 2-methyl-; o-Toluidine
240	U353	106-49-0	Benzenamine, 4-methyl-; p-Toluidine
241	U359	110-80-5	Ethanol, 2-ethoxy-; Ethylene glycol monoethyl ether
242	U364	22961-82-6	1,3-Benzodioxol-4-ol, 2,2-dimethyl-; Bendiocarb phenol
243	U367	1563-38-8	7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-; Carbofuran phenol
244	U372	10605-21-7	Carbamic acid, 1H-benzimidazol-2-yl, methyl ester; Carbendazim
245	U373	122-42-9	Carbamic acid, phenyl-, 1-methylethyl ester; Propham
246	U387	52888-80-9	Carbamothioic acid, dipropyl-, S-(phenylmethyl) ester; Prosulfocarb
247	U389	2303-17-5	Carbamothioic acid, bis(1-methylethyl)-, S-(2,3,3-trichloro-2-propenyl) ester; Triallate
248	U394	30558-43-1	A2213; Ethanimidothioic acid, 2-(dimethylamino)-N-hydroxy-2-oxo-, methyl ester
249	U395	5952-26-1	Diethylene glycol, dicarbamate; Ethanol, 2,2′-oxybis-, dicarbamate
250	U404	121-44-8	Ethanamine, N,N-diethyl-; Triethylamine
251	U408	118-79-6	2,4,6-Tribromophenol
252	U409	23564-05-8	Carbamic acid, [1,2-phenylenebis(iminocarbonothioyl)]bis-, dimethyl ester; Thiophanate-methyl
253	U410	59669-26-0	Ethanimidothioic acid, N,N′-[thiobis[(methylimino)carbonyloxy]]bis-, dimethyl ester; Thiodicarb
254	U411	114-26-1	Phenol, 2-(1-methylethoxy)-, methylcarbamate; Propoxur

Return to footnote ^aCAS registry numbers are provided for reference purposes only. They do not form part of these Regulations and may be amended without the need to amend these Regulations.
Return to footnote ^bCAS registry numbers are provided for parent or main compound only.

SCHEDULE 9(Subparagraphs 4(2)(g)(i) and (3)(g)(i))

Excluded Material

Item	Description
1	Slags, skimmings and dross containing precious metals, copper or zinc for further refining.
2	Platinum group metal (PGM) automobile catalysts.
3	Any part of electronic equipment — including scrap but excluding cells and batteries — that is suitable for base or precious metal recovery.
4	Brass in the form of turnings, borings and choppings.

SCHEDULE 10(Paragraph 16(1)(c), subsection 16(3), paragraphs 16(4)(a) and 28(1)(c), subsection 28(3), paragraphs 28(4)(a) and 40(1)(c), subsection 40(3), paragraphs 40(4)(a) and 50(1)(a), subsection 50(2), paragraph 61(1)(c), subsection 61(3), paragraphs 61(4)(a) and 72(1)(c), subsection 72(3) and paragraph 72(4)(a))Movement Document for Imports, Exports and Transits — Information Required

Movement Document — Part A

- 1 (1) In the case of an import, the following information is required in Part A:
  - (a) the reference number that is provided by the Minister for the movement document;
  - (b) the name, telephone number, email address, mailing address and unique identification number of the holder of the import permit or permits;
  - (c) the name and telephone number of the individual who signs Part A;
  - (d) the civic address of the facility from which the shipment that contains hazardous waste or hazardous recyclable material is to be shipped;
  - (e) the foreign exporter’s name, telephone number, email address, mailing address and unique identification number;
  - (f) the civic address of the receiving facility to which the shipment is to be delivered;
  - (g) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the movement document,
    - (i) the shipping name and description that are set out in column 2 of Schedule 1 to the Transportation of Dangerous Goods Regulations and are associated with the UN number referred to in that line entry,
    - (ii) the quantity of the hazardous waste or hazardous recyclable material in kilograms or litres,
    - (iii) the number of containers used, if applicable, and the code 01 when the container is a drum, 02 when it is a tank, 03 when the hazardous waste or hazardous recyclable material is shipped in bulk, 04 when the container is a carton, 05 when it is a bag, 06 when it is roll off or lugger, 07 when it is palletized, wrapped with plastic wrap and not in any other container, 08 when it is a mix of containers or 09 in any other case, and
    - (iv) the applicable tariff item as defined in subsection 2(1) of the Customs Tariff; and
  - (h) the date on which the shipment is to be shipped and the date on which it is scheduled to be delivered to the receiving facility.
- (2) In the case of an export, the following information is required in Part A:
  - (a) the reference number that is provided by the Minister for the movement document;
  - (b) the name, telephone number, email address, mailing address and unique identification number of the holder of the export permit or permits;
  - (c) the name and telephone number of the individual who signs Part A;
  - (d) the civic address of the facility from which the shipment that contains hazardous waste or hazardous recyclable material is to be shipped;
  - (e) the foreign importer’s name, telephone number, email address, mailing address and unique identification number;
  - (f) the civic address of the receiving facility to which the shipment is to be delivered;
  - (g) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the movement document,
    - (i) the shipping name and description that are set out in column 2 of Schedule 1 to the Transportation of Dangerous Goods Regulations and are associated with the UN number referred to in that line entry,
    - (ii) the quantity of the hazardous waste or hazardous recyclable material in kilograms or litres,
    - (iii) the number of containers used, if applicable, and the code 01 when the container is a drum, 02 when it is a tank, 03 when the hazardous waste or hazardous recyclable material is shipped in bulk, 04 when the container is a carton, 05 when it is a bag, 06 when it is roll off or lugger, 07 when it is palletized, wrapped with plastic wrap and not in any other container, 08 when it is a mix of containers or 09 in any other case, and
    - (iv) the applicable tariff item as defined in subsection 2(1) of the Customs Tariff; and
  - (h) the date on which the shipment is to be shipped and the date on which it is scheduled to be delivered to the receiving facility.
- (3) In the case of an export from and import to Canada following transit through a foreign country, the following information is required in Part A:
  - (a) the reference number that is provided by the Minister for the movement document;
  - (b) the name, telephone number, email address, mailing address and unique identification number of the holder of the permit or permits;
  - (c) the name and telephone number of the individual who signs Part A;
  - (d) the civic address of the facility from which the shipment that contains hazardous waste or hazardous recyclable material is to be shipped;
  - (e) the civic address of the receiving facility to which the shipment is to be delivered;
  - (f) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the movement document,
    - (i) the shipping name and description that are set out in column 2 of Schedule 1 to the Transportation of Dangerous Goods Regulations and are associated with the UN number referred to in that line entry,
    - (ii) the quantity of the hazardous waste or hazardous recyclable material in kilograms or litres,
    - (iii) the number of containers used, if applicable, and the code 01 when the container is a drum, 02 when it is a tank, 03 when the hazardous waste or hazardous recyclable material is shipped in bulk, 04 when the container is a carton, 05 when it is a bag, 06 when it is roll off or lugger, 07 when it is palletized, wrapped with plastic wrap and not in any other container, 08 when it is a mix of containers or 09 in any other case, and
    - (iv) the applicable tariff item as defined in subsection 2(1) of the Customs Tariff; and
  - (g) the date on which the shipment is to be shipped and the date on which it is scheduled to be delivered to the receiving facility.
- (4) In the case of a transit through Canada, the following information is required in Part A:
  - (a) the reference number that is provided by the Minister for the movement document;
  - (b) the name, telephone number, email address, mailing address and unique identification number of the holder of the transit permit or permits;
  - (c) the name and telephone number of the individual who signs Part A;
  - (d) the civic address of the facility from which the shipment that contains hazardous waste or hazardous recyclable material is to be shipped;
  - (e) the foreign importer’s name, telephone number, email address, mailing address and unique identification number;
  - (f) the civic address of the receiving facility to which the shipment is to be delivered;
  - (g) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the movement document,
    - (i) the shipping name and description that are set out in column 2 of Schedule 1 to the Transportation of Dangerous Goods Regulations and are associated with the UN number referred to in that line entry,
    - (ii) the quantity of the hazardous waste or hazardous recyclable material in kilograms or litres,
    - (iii) the number of containers used, if applicable, and the code 01 when the container is a drum, 02 when it is a tank, 03 when the hazardous waste or hazardous recyclable material is shipped in bulk, 04 when the container is a carton, 05 when it is a bag, 06 when it is roll off or lugger, 07 when it is palletized, wrapped with plastic wrap and not in any other container, 08 when it is a mix of containers or 09 in any other case, and
    - (iv) the applicable tariff item as defined in subsection 2(1) of the Customs Tariff; and
  - (h) the date on which the shipment is to be shipped, the date on which it is scheduled to enter Canada and the date on which it is scheduled to be delivered to the receiving facility.
- (5) In the case of a return to Canada, the following information is required in Part A:
  - (a) the reference number that is provided by the Minister for the movement document;
  - (b) if the permit holder is the holder of the original export permit or permits, the name, telephone number, email address, mailing address and unique identification number of the foreign importer that is named in the original export permit or permits;
  - (c) the name and telephone number of the individual who signs Part A;
  - (d) the civic address of the facility from which the shipment that contains hazardous waste or hazardous recyclable material is to be shipped for return;
  - (e) the name, telephone number, email address, mailing address and unique identification number of the holder of the import permit for the return;
  - (f) the civic address of the facility in Canada to which the shipment is to be delivered;
  - (g) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the movement document,
    - (i) the shipping name and description that are set out in column 2 of Schedule 1 to the Transportation of Dangerous Goods Regulations and are associated with the UN number referred to in that line entry,
    - (ii) the quantity of the hazardous waste or hazardous recyclable material in kilograms or litres,
    - (iii) the number of containers used, if applicable, and the code 01 when the container is a drum, 02 when it is a tank, 03 when the hazardous waste or hazardous recyclable material is shipped in bulk, 04 when the container is a carton, 05 when it is a bag, 06 when it is roll off or lugger, 07 when it is palletized, wrapped with plastic wrap and not in any other container, 08 when it is a mix of containers or 09 in any other case, and
    - (iv) the applicable tariff item as defined in subsection 2(1) of the Customs Tariff; and
  - (h) the date on which the shipment is to be shipped and the date on which it is scheduled to be delivered to the facility.
- (6) In the case of a return to a foreign country of origin, the following information is required in Part A:
  - (a) the reference number that is provided by the Minister for the movement document;
  - (b) if the permit holder is the holder of the original import permit or permits, the name, telephone number, email address, mailing address and unique identification number of the foreign exporter that is named in the original import permit or permits;
  - (c) the name and telephone number of the individual who signs Part A;
  - (d) the civic address of the facility from which the shipment that contains hazardous waste or hazardous recyclable material is to be shipped for return;
  - (e) the name, telephone number, email address, mailing address and unique identification number of the holder of the export permit for the return;
  - (f) the civic address of the facility in the country of origin to which the shipment is to be delivered;
  - (g) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the movement document,
    - (i) the shipping name and description that are set out in column 2 of Schedule 1 to the Transportation of Dangerous Goods Regulations and are associated with the UN number referred to in that line entry,
    - (ii) the quantity of the hazardous waste or hazardous recyclable material in kilograms or litres,
    - (iii) the number of containers used, if applicable, and the code 01 when the container is a drum, 02 when it is a tank, 03 when the hazardous waste or hazardous recyclable material is shipped in bulk, 04 when the container is a carton, 05 when it is a bag, 06 when it is roll off or lugger, 07 when it is palletized, wrapped with plastic wrap and not in any other container, 08 when it is a mix of containers or 09 in any other case, and
    - (iv) the applicable tariff item as defined in subsection 2(1) of the Customs Tariff; and
  - (h) the date on which the shipment is to be shipped and the date on which it is scheduled to be delivered to the facility.

Movement Document — Part B

2 The following information in Part B is required from an authorized carrier:
- (a) the authorized carrier’s name, telephone number, email address, mailing address and unique identification number;
- (b) the name and telephone number of the individual who signs Part B;
- (c) in the case of an authorized carrier that is to transport a shipment that contains hazardous waste or hazardous recyclable material as described in Part A into or out of Canada, the port and date of any entry into, and of any exit out of, Canada; and
- (d) a confirmation
  - (i) that the authorized carrier has received, and will transport, the shipment in accordance with the permit or permits, and
  - (ii) if applicable, that they are to deliver the shipment to the receiving facility referred to in Part A of the movement document.

Movement Document — Part C

- 3 (1) In the case of an import to or an export from Canada, or an export from, and import to, Canada following transit through a foreign country, the following information is required in Part C:
  - (a) the receiving facility’s name, telephone number, email address, civic address and unique identification number;
  - (b) the name and telephone number of the individual who signs Part C;
  - (c) the date on which the shipment was delivered; and
  - (d) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the movement document, the quantity of the hazardous waste or hazardous recyclable material, in kilograms or litres, that was received.
- (2) In the case of a return to Canada or to a foreign country of origin, the following information is required in Part C:
  - (a) the name, telephone number, email address, civic address and unique identification number of the facility to which the shipment was delivered;
  - (b) the name and telephone number of the individual who signs Part C;
  - (c) the date on which the shipment was delivered; and
  - (d) for each type of hazardous waste or hazardous recyclable material that is recorded as a line entry in the movement document, the quantity of the hazardous waste or hazardous recyclable material, in kilograms or litres, that was received.

SCHEDULE 11(Clauses 78(1)(a)(iii)(A) and (C) to (F) and Schedules 3 and 4)

PART 1

Reasons Why Waste or Recyclable Material Is Intended for Disposal or Recycling

Item	Code	Reason
	Column 1	Column 2
1	Q1	Production residues that are not otherwise specified in this Part.
2	Q2	Off-specification products.
3	Q3	Products whose date for appropriate use has expired.
4	Q4	Material that has been spilled or lost or has undergone other mishap, including any material, equipment, etc., that has been contaminated as a result of the mishap.
5	Q5	Material that has been contaminated or soiled as a result of planned actions (e.g., residues from cleaning operations, packing material, containers).
6	Q6	Unusable parts (e.g., rejected batteries, exhausted catalysts).
7	Q7	Substances that no longer perform satisfactorily (e.g., contaminated acids, contaminated solvents, exhausted tempering salts).
8	Q8	Residues from industrial processes (e.g., slags, still bottoms).
9	Q9	Residues from pollution abatement processes (e.g., scrubber sludges, baghouse dusts, spent filters).
10	Q10	Machining or finishing residues (e.g., lathe turning, mill scales).
11	Q11	Residues from raw material processing (e.g., mining residues, oil field slop).
12	Q12	Adulterated material (e.g., oils contaminated with polychlorinated biphenyls).
13	Q13	Any material, substance or product whose use has been banned by law in the country of destination.
14	Q14	Products for which there is no further use (e.g., agricultural, household, office, commercial and shop discards).
15	Q15	Any material, substance or product that results from remedial actions with respect to contaminated land.
16	Q16	Any material, substance or product that the generator or exporter declares to be waste and that are not referred to in this Part.

PART 2

Generic Types of Potentially Hazardous Waste

Item	Code	Type
	Column 1	Column 2
1	1	Clinical waste from medical care in hospitals, medical centres and clinics. (Y1)
2	2	Waste from the production and preparation of pharmaceutical products. (Y2)
3	3	Waste pharmaceuticals, drugs and medicines. (Y3)
4	4	Waste from the production, formulation and use of biocides and phytopharmaceuticals. (Y4)
5	5	Waste from the manufacture, formulation and use of wood-preserving chemicals. (Y5)
6	6	Waste from the production, formulation and use of organic solvents. (Y6)
7	7	Waste from heat treatment and tempering operations that contains cyanides. (Y7)
8	8	Waste mineral oils that are unfit for their originally intended use. (Y8)
9	9	Waste oil and water, hydrocarbon and water mixtures and emulsions. (Y9)
10	10	Waste substances and articles that contain or are contaminated with polychlorinated biphenyls, polychlorinated terphenyls, or polybrominated biphenyls. (Y10)
11	11	Waste tarry residues from refining, distillation and any pyrolytic treatment. (Y11)
12	12	Waste from the production, formulation and use of inks, dyes, pigments, paints, lacquers and varnishes. (Y12)
13	13	Waste from the production, formulation and use of resins, latex, plasticizers, glues and adhesives. (Y13)
14	14	Waste chemical substances from research and development or teaching activities that are not identified or are new, and whose effects on humans or the environment are unknown. (Y14)
15	15	Waste of an explosive nature that is not subject to other legislation. (Y15)
16	16	Waste from the production, formulation and use of photographic chemicals and processing material. (Y16)
17	17	Waste from surface treatment of metals and plastics. (Y17)
18	18	Residues from industrial waste-disposal operations. (Y18)
19	19	Material that contains any of the constituents listed in column 2 of Part 3 and that consists of animal or vegetable soaps, fats or waxes.
20	20	Non-halogenated organic substances that are not employed as solvents.
21	21	Inorganic substances without metals.
22	22	Ashes or cinders.
23	23	Soil, sand or clay, including dredging spoils.
24	24	Non-cyanidic tempering salts.
25	25	Metallic dust or powder.
26	26	Spent catalyst material.
27	27	Liquids or sludges that contain metals.
28	28	Residue from pollution-control operations, except scrubber sludges and sludges from water-purification plants and wastewater treatment plants.
29	29	Scrubber sludges.
30	30	Sludges from water-purification plants and wastewater treatment plants.
31	31	Decarbonization residue.
32	32	Ion-exchange column residue.
33	33	Sewage sludges.
34	34	Wastewaters that are not otherwise taken into account in this Part.
35	35	Residue from the cleaning of tanks or equipment.
36	36	Contaminated equipment.
37	37	Contaminated containers whose contents included one or more of the constituents listed in column 2 of Part 3.
38	38	Batteries and other electrical cells.
39	39	Vegetable oils.
40	40	Material that has been segregated from households and that exhibits any of the characteristics listed in column 2 of Part 4.
41	41	Any other waste that contains any of the constituents listed in column 2 of Part 3.

PART 3

Constituents of Potentially Hazardous Waste

Item	Code	ConstituentFootnote for PART 3 Constituents of Potentially Hazardous Waste^a
	Column 1	Column 2
1	C1	Beryllium, beryllium compounds (Y20)
2	C2	Vanadium compounds
3	C3	Hexavalent chromium compounds (Y21)
4	C4	Cobalt compounds
5	C5	Nickel compounds
6	C6	Copper compounds (Y22)
7	C7	Zinc compounds (Y23)
8	C8	Arsenic, arsenic compounds (Y24)
9	C9	Selenium, selenium compounds (Y25)
10	C10	Silver compounds
11	C11	Cadmium, cadmium compounds (Y26)
12	C12	Tin compounds
13	C13	Antimony, antimony compounds (Y27)
14	C14	Tellurium, tellurium compounds (Y28)
15	C15	Barium, barium compounds, excluding barium sulfate
16	C16	Mercury, mercury compounds (Y29)
17	C17	Thallium, thallium compounds (Y30)
18	C18	Lead, lead compounds (Y31)
19	C19	Inorganic sulphides
20	C20	Inorganic fluorine compounds, excluding calcium fluoride (Y32)
21	C21	Inorganic cyanides (Y33)
22	C22	The following alkaline or alkaline earth metals: lithium, sodium, calcium, potassium and magnesium
23	C23	Acidic solutions or acids in solid form (Y34)
24	C24	Basic solutions or bases in solid form (Y35)
25	C25	Asbestos (dust and fibres) (Y36)
26	C26	Organic phosphorus compounds (Y37)
27	C27	Metal carbonyls (Y19)
28	C28	Peroxides
29	C29	Chlorates
30	C30	Perchlorates
31	C31	Azides
32	C32	Polychlorinated biphenyls, polychlorinated terphenyls, polybrominated biphenyls (Y10)
33	C33	Pharmaceutical or veterinary compounds
34	C34	Biocides and phyto-pharmaceutical substances
35	C35	Infectious substances
36	C36	Creosotes
37	C37	Isocyanates, thiocyanates
38	C38	Organic cyanides (Y38)
39	C39	Phenols, phenol compounds, including chlorophenols (Y39)
40	C40	Ethers (Y40)
41	C41	Halogenated organic solvents (Y41)
42	C42	Organic solvents, excluding halogenated solvents (Y42)
43	C43	Organohalogen compounds other than substances referred to in this Part (Y45)
44	C44	Aromatic compounds, polycyclic and heterocyclic organic compounds
45	C45	Organic nitrogen compounds, especially aliphatic amines
46	C46	Organic nitrogen compounds, especially aromatic amines
47	C47	Substances of an explosive character (Y15)
48	C48	Sulphur organic compounds
49	C49	Any congenor of polychlorinated dibenzo-furan (Y43)
50	C50	Any congenor of polychlorinated dibenzo-p-dioxin (Y44)
51	C51	Hydrocarbons and their oxygen, nitrogen and sulphur compounds that are not otherwise taken into account in this Part

Return to footnote ^aIf applicable, correspondence with codes referred to in Annex I to the Convention is indicated in brackets after the constituent.

PART 4

List of Hazardous Characteristics

Item	CodeFootnote for PART 4 List of Hazardous Characteristics^b	Hazardous Characteristic
	Column 1	Column 2
1	H3	Liquids, mixtures of liquids and liquids containing solids in solution or suspension that give off a flammable vapour at temperatures of not more than 60.5ºC, for a closed-cup test, or not more than 65.6ºC for an open-cup test. (Since the results of open- and closed-cup tests are not strictly comparable and even individual results by the same test are often variable, regulations varying from the above figures to make allowance for such differences would be within the spirit of this description.) Includes paints, varnishes, lacquers, etc., but does not include any substance or waste that is otherwise classified on account of its dangerous characteristics. (Flammable liquids)
2	H4.1	Solids or waste solids (other than those classed as explosives) that, under conditions encountered in transport, are readily combustible or may cause or contribute to fire through friction. (Flammable solids)
3	H4.2	Any substance or waste that is liable to spontaneous heating under normal conditions encountered in transport or to heating up in contact with air, and is liable to catch fire. (Spontaneous combustion)
4	H4.3	Any substance or waste that is liable, by interaction with water, to become spontaneously flammable or to give off flammable gases in dangerous quantities. (In contact with water, spontaneous combustion or emission of flammable gases)
5	H5.1	Any substance or waste that is not necessarily combustible itself but that may, generally by yielding oxygen, cause or contribute to the combustion of other material. (Oxidizing)
6	H5.2	Any organic substance or waste containing the bivalent-0-0-structure that may undergo exothermic self-accelerating decomposition due to its thermal instability. (Organic peroxides)
7	H6.1	Any substance or waste that is liable to cause death, serious injury or harm to human health if swallowed, inhaled or placed in contact with skin. (Poisonous (acute))
8	H6.2	Any substance or waste containing viable micro-organisms or their toxins that are known or suspected to cause disease in animals or humans. (Infectious Substances)
9	H8	Any substance or waste that, by chemical action, causes severe damage when in contact with living tissue or, in the case of leakage, materially damages or destroys other goods or the means of transport. It may also cause other hazards. (Corrosives)
10	H10	Any substance or waste that is liable, by interaction with air or water, to give off toxic gases in dangerous quantities. (Liberation of toxic gases in contact with air or water)
11	H11	Any substance or waste that, if it is inhaled or ingested, or if it penetrates the skin, may involve delayed or chronic effects, including carcinogenicity. (Toxic (delayed or chronic))
12	H12	Any substance or waste that, if it is released, presents or may cause immediate or delayed adverse impacts to the environment by means of bioaccumulation or has toxic effects on biotic systems. (Ecotoxic)
13	H13	Any substance or waste that is capable, by any means after disposal, of yielding another material (e.g., leachate that possesses any of the characteristics listed in this Part). (Leachate)

Return to footnote ^bCode numbers correspond to the hazard class numbering system in the United Nations Recommendations on the Transport of Dangerous Goods for H3 through H8.

PART 5

Activities That May Generate Potentially Hazardous Waste

Item	Code	Activity
	Column 1	Column 2
Agriculture — Farming Industry
1	A100	Agriculture and forest management
2	A101	Cultivation
3	A102	Animal husbandry
4	A103	Forest management and forest exploitation (lumbering)
5	A110	Animal and vegetable products from the food sector
6	A111	Meat industry, slaughterhouses and butchery
7	A112	Dairy industry
8	A113	Animal and vegetable oil and grease industry
9	A114	Sugar industry
10	A115	Other activities of the food sector
11	A120	Drink industry
12	A121	Distillation of alcohol and spirits
13	A122	Brewing of beer
14	A123	Manufacture of other drinks
15	A130	Manufacture of animal feed
Energy
16	A150	Coal industry
17	A151	Production and preparation of coal and coal products
18	A152	Coking operations
19	A160	Petroleum industry
20	A161	Extraction of petroleum and natural gas
21	A162	Petroleum refining
22	A163	Storage of petroleum and products derived from refining of natural gas
23	A170	Production of electricity
24	A171	Central thermal facilities
25	A172	Central hydraulic facilities
26	A173	Central nuclear facilities
27	A174	Other central electricity facilities
28	A180	Production of water
Metallurgy — Mechanical and Electrical Engineering
29	A200	Extraction of metallic ores
30	A210	Ferrous metallurgy
31	A211	Cast iron production (coke oven)
32	A212	Raw steel production (pig iron)
33	A213	Primary steel transformation (rolling mills)
34	A220	Non-ferrous metallurgy
35	A221	Production of alumina
36	A222	Aluminum metallurgy
37	A223	Metallurgy of lead and zinc
38	A224	Metallurgy of precious metals
39	A225	Metallurgy of other non-ferrous metals
40	A226	Ferro-alloy industry
41	A227	Manufacture of electrodes
42	A230	Foundry and metalworking operations
43	A231	Ferrous metal foundries
44	A232	Non-ferrous metal foundries
45	A233	Metalworking (not including machining)
46	A240	Mechanical, electrical and electronic construction
47	A241	Machining
48	A242	Thermal treatment
49	A243	Surface treatment
50	A244	Application of paint
51	A245	Assembly and wiring
52	A246	Production of batteries and dry cells
53	A247	Production of electrical wires and cables (cladding, plating, insulation)
54	A248	Production of electronic components
Non-Metallic Minerals — Construction Material — Ceramics — Glass
55	A260	Mining and quarrying of non-metallic minerals
56	A270	Construction material, ceramics and glass
57	A271	Production of lime, cement and plaster
58	A272	Fabrication of ceramic products
59	A273	Fabrication of products containing asbestos cement
60	A274	Production of other construction material
61	A275	Glass industry
62	A280	Building, building sites and landscaping
Primary Chemical Industry
63	A300	Production of primary chemicals and chemical feedstocks
64	A301	Chlorine industry
65	A351	Fertilizer fabrication
66	A401	Other manufacturing generators of primary inorganic industrial chemicals
67	A451	Petroleum and coal industry
68	A501	Manufacture of basic plastic material
69	A551	Other primary organic chemical manufacture
70	A601	Chemical treatment of fats and fabrication of basic substances for detergents
71	A651	Fabrication of pharmaceuticals, pesticides, biocides and weed killers
72	A669	Other manufacture of finished chemicals
Industries Producing Products Based Upon Primary Chemicals
73	A700	Production of inks, varnish, paints and glues
74	A701	Production of ink
75	A702	Production of paint
76	A703	Production of varnish
77	A704	Production of glue
78	A710	Fabrication of photographic products
79	A711	Production of photosensitive plates
80	A712	Fabrication of products for photographic treatments
81	A720	Perfume industry and fabrication of soap and detergent products
82	A721	Fabrication of soap products
83	A722	Fabrication of detergent products
84	A723	Fabrication of perfume products
85	A730	Finished rubber and plastic material
86	A731	Rubber industry
87	A732	Finished plastic material
88	A740	Fabrication of products based upon asbestos
89	A750	Production of powders and explosives
Textiles and Leathers — Various Wood Based and Furniture Industries
90	A760	Textile and clothing industry
91	A761	Combing and carding of textile fibres
92	A762	Threading, spinning and weaving
93	A763	Bleaching, dyeing and printing
94	A764	Clothing manufacture
95	A770	Leather and hide industry
96	A771	Tanneries, tanning
97	A772	Fur trade
98	A773	Manufacture of shoes and other leather products
99	A780	Wood and furniture industry
100	A781	Sawmills and production of wood panels
101	A782	Manufacture of wood and furniture products
102	A790	Various related industries
Paper — Cardboard — Printing
103	A800	Paper and cardboard industry
104	A801	Fabrication of paper pulp
105	A802	Manufacture of paper and cardboard
106	A803	Finished goods of paper and cardboard
107	A810	Printing, publishing and photographic laboratories
108	A811	Printing and publishing
109	A812	Photographic laboratories
Commercial Services
110	A820	Laundries, bleaching services and dyers
111	A830	Business enterprise
112	A840	Transport, automobile dealers and repair facilities
113	A841	Automobile dealers and automobile repair facilities
114	A842	Transportation
115	A850	Hotels, cafés and restaurants
General Services
116	A860	Health
117	A861	Health (hospitals, medical centres, nursing homes and laboratories)
118	A870	Research
119	A871	Research (including research laboratories)
120	A880	Administrative activities, offices
Households
121	A890	Households
Pollution Control — Waste Disposal
122	A900	Cleaning and maintenance of public areas
123	A910	Urban water treatment facilities
124	A920	Urban waste treatment
125	A930	Treatment of industrial effluents and waste
126	A931	Incineration
127	A932	Physico-chemical treatment
128	A933	Biological treatment
129	A934	Solidification of waste
130	A935	Collection or pre-treatment of waste
131	A936	Landbased disposal above, on or below the surface
Regeneration — Recovery
132	A940	Regeneration activities
133	A941	Regeneration of oils
134	A942	Regeneration of solvents
135	A943	Regeneration of ion exchange resins
136	A950	Recovery activities

SCHEDULE 12(Clause 78(1)(a)(iii)(I) and Schedules 3 and 4)

PART 1

Hazardous Waste and Hazardous Recyclable Material from Non-Specific Sources

Item	Code	Description of Hazardous Waste and Hazardous Recyclable Material
	Column 1	Column 2
1	F001	The following spent halogenated solvents used in degreasing: tetrachloroethylene, trichloroethylene, methylene chloride, 1,1,1 trichloroethane, carbon tetrachloride and chlorinated fluorocarbons; all spent solvent mixtures and blends used in degreasing containing, before use, a total of 10% or more (by volume) of one or more of the above halogenated solvents or those solvents listed as F002, F004 or F005; and still bottoms from the recovery of those spent solvents and spent solvent mixtures.
2	F002	The following spent halogenated solvents: tetrachloroethylene, methylene chloride, trichloroethylene, 1,1,1 trichloroethane, chlorobenzene, 1,1,2 trichloro 1,2,2 trifluoroethane, ortho dichlorobenzene, trichlorofluoromethane and 1,1,2-trichloroethane; all spent solvent mixtures and blends containing, before use, a total of 10% or more (by volume) of one or more of the above halogenated solvents or those listed as F001, F004 or F005; and still bottoms from the recovery of those spent solvents and spent solvent mixtures.
3	F003	The following spent non-halogenated solvents: xylenes, acetone, ethyl acetate, ethyl benzene, ethyl ether, methyl isobutyl ketone, n butyl alcohol, cyclohexanone and methanol; all spent solvent mixtures and blends containing, before use, only the above spent non-halogenated solvents; and all spent solvent mixtures and blends containing, before use, one or more of the above spent non-halogenated solvents, and a total of 10% or more (by volume) of one or more of those solvents listed as F001, F002, F004 or F005; and still bottoms from the recovery of those spent solvents and spent solvent mixtures.
4	F004	The following spent non-halogenated solvents: cresols, cresylic acid and nitrobenzene; all spent solvent mixtures and blends containing, before use, a total of 10% or more (by volume) of one or more of the above spent non-halogenated solvents or those solvents listed as F001, F002 or F005; and still bottoms from the recovery of those spent solvents and spent solvent mixtures.
5	F005	The following spent non-halogenated solvents: toluene, methyl ethyl ketone, carbon disulphide, isobutanol, pyridine, benzene, 2-ethoxyethanol and 2-nitropropane; all spent solvent mixtures and blends containing, before use, a total of 10% or more (by volume) of one or more of the above spent non-halogenated solvents or those solvents listed as F001, F002 or F004; and still bottoms from the recovery of those spent solvents and spent solvent mixtures.
6	F006	Wastewater treatment sludges from electroplating operations except for the following processes: (1) sulphuric acid anodizing of aluminum; (2) tin plating on carbon steel; (3) zinc plating (on a segregated basis) on carbon steel; (4) aluminum or aluminum zinc plating on carbon steel; (5) cleaning or stripping associated with tin, zinc or aluminum plating on carbon steel; and (6) chemical etching and milling of aluminum.
7	F007	Spent cyanide plating bath solutions from electroplating operations.
8	F008	Plating bath sludge from the bottom of plating baths from electroplating operations if cyanides are used in the process.
9	F009	Spent stripping and cleaning bath solutions from electroplating operations if cyanides are used in the process.
10	F010	Quenching bath sludge from oil baths from metal heat treating operations if cyanides are used in the process.
11	F011	Spent cyanide solutions from salt bath pot cleaning from metal heat treating operations.
12	F012	Quenching wastewater treatment sludge from metal heat treating operations if cyanides are used in the process.
13	F019	Wastewater treatment sludge from the chemical conversion coating of aluminum except from zirconium phosphating in aluminum can washing if the phosphating is an exclusive conversion coating process.
14	F020	Waste from the production or manufacturing use (as a reactant, chemical intermediate or component in a formulating process) of tri- or tetrachlorophenol or of intermediates used to produce their pesticide derivatives, excluding wastewater and spent carbon from hydrogen chloride purification and waste from the production of hexachlorophene from highly purified 2,4,5-trichlorophenol.
15	F021	Waste from the production or manufacturing use (as a reactant, chemical intermediate or component in a formulating process) of pentachlorophenol or of intermediates used to produce its derivatives, excluding wastewater and spent carbon from hydrogen chloride purification.
16	F022	Waste from the manufacturing use (as a reactant, chemical intermediate or component in a formulating process) of tetra-, penta- or hexachlorobenzenes under alkaline conditions, excluding wastewater and spent carbon from hydrogen chloride purification.
17	F023	Waste from the production of material on equipment previously used for the production or manufacturing use (as a reactant, chemical intermediate or component in a formulating process) of tri- and tetrachlorophenols, excluding wastewater and spent carbon from hydrogen chloride purification and waste from equipment used only for the production or use of hexachlorophene from highly purified 2,4,5-trichlorophenol.
18	F024	Process waste, including distillation residues, heavy ends, tars and reactor clean-out waste from the production of certain chlorinated aliphatic hydrocarbons by free radical catalyzed processes, the chlorinated aliphatic hydrocarbons being those having carbon chain lengths ranging from 1 to 5, with varying amounts and positions of chlorine substitution, and excluding wastewaters, wastewater treatment sludge, spent catalysts and waste set out in this Schedule.
19	F025	Condensed light ends, spent filters and filter aids, and spent desiccant waste from the production of certain chlorinated aliphatic hydrocarbons, by free radical catalyzed processes, the chlorinated aliphatic hydrocarbons being those having carbon chain lengths ranging from 1 to 5, with varying amounts and positions of chlorine substitution.
20	F026	Waste from the production of material on equipment previously used for the manufacturing use (as a reactant, chemical intermediate or component in a formulating process) of tetra-, penta- or hexachlorobenzene under alkaline conditions, excluding wastewater and spent carbon from hydrogen chloride purification.
21	F027	Discarded unused formulations containing tri-, tetra- or pentachlorophenol or discarded unused formulations containing compounds derived from those chlorophenols, excluding formulations containing hexachlorophene synthesized from prepurified 2,4,5-trichlorophenol as the sole component.
22	F028	Residues resulting from incineration or treatment of soil contaminated with waste listed as F020, F021, F022, F023, F026 or F027.
23	F032	Wastewaters, spent formulations from wood preserving processes generated at plants that currently use or have previously used chlorophenolic formulations, process residuals and preservative drippage, except wastewaters that have not come into contact with process contaminants, spent formulations that potentially cross-contaminated waste from wood preserving processes at plants that do not resume or initiate use of chlorophenolic preservatives, and bottom sediment sludge listed in Part 2 as K001.
24	F034	Wastewaters, process residuals, preservative drippage and spent formulations from wood preserving processes generated at plants that use creosote formulations, excluding bottom sediment sludge listed in Part 2 as K001 and wastewaters that have not come into contact with process contaminants.
25	F035	Wastewaters, process residuals, preservative drippage and spent formulations from wood preserving processes generated at plants that use inorganic preservatives containing arsenic or chromium, excluding bottom sediment sludge listed in Part 2 as K001 and wastewaters that have not come into contact with process contaminants.
26	F037	Petroleum refinery primary oil, water and solids separation sludge; sludge generated from the gravitational separation of oil, water and solids during the storage or treatment of process wastewaters and oil cooling wastewaters from petroleum refineries, including those generated in oil, water and solids separators, tanks and impoundments, ditches and other conveyances, sumps and stormwater units receiving dry weather flow; sludge generated in stormwater units that do not receive dry weather flow; sludge generated from non-contact once-through cooling waters segregated for treatment from other processes or oily cooling waters; sludge generated in biological treatment units that employ one of the following treatment methods: activated sludge, trickling filter, rotating biological contactor for the continuous accelerated biological oxidation of wastewaters, or high-rate aeration (including sludge generated in one or more additional units after wastewaters have been treated in biological treatment units). Waste listed in Part 2 as K051 is excluded.
27	F038	Petroleum refinery secondary (emulsified) oil, water and solids separation sludge; sludge or float generated from the physical or chemical separation of oil, water and solids in process wastewaters and oily cooling wastewaters from petroleum refineries, including sludge and floats generated in induced air flotation (IAF) units, tanks and impoundments, and in dissolved air flotation (DAF) units; sludge generated in stormwater units that do not receive dry weather flow; sludge generated from non-contact once-through cooling waters segregated for treatment from other processes or oily cooling water; sludge and float generated in biological treatment units that employ one of the following treatment methods: activated sludge, trickling filter, rotating biological contactor for the continuous accelerated biological oxidation of wastewaters, or high-rate aeration (including sludge and float generated in one or more additional units after wastewaters have been treated in a biological treatment unit). Waste listed as F037, or in Part 2 as K048 or K051, is excluded.
28	F039	Leachate (liquids that percolated through land disposed waste) resulting from the disposal of more than one waste classified as a hazardous waste by being included in this Schedule.

PART 2

Hazardous Waste and Hazardous Recyclable Material from Specific Sources

Item	Code	Description of Hazardous Waste and Hazardous Recyclable Material
	Column 1	Column 2
Wood Preservation
1	K001	Bottom sediment sludge from the treatment of wastewaters from wood preserving processes that use creosote or pentachlorophenol or both.
Inorganic Pigments
2	K002	Wastewater treatment sludge from the production of chrome yellow and orange pigments.
3	K003	Wastewater treatment sludge from the production of molybdate orange pigments.
4	K004	Wastewater treatment sludge from the production of zinc yellow pigments.
5	K005	Wastewater treatment sludge from the production of chrome green pigments.
6	K006	Wastewater treatment sludge from the production of chromeoxide green pigments (anhydrous and hydrated).
7	K007	Wastewater treatment sludge from the production of iron blue pigments.
8	K008	Oven residue from the production of chromeoxide green pigments.
Organic Chemicals
9	K009	Distillation bottoms from the production of acetaldehyde from ethylene.
10	K010	Distillation side cuts from the production of acetaldehyde from ethylene.
11	K011	Bottom stream from the wastewater stripper in the production of acrylonitrile.
12	K013	Bottom stream from the acetonitrile column in the production of acrylonitrile.
13	K014	Bottoms from the acetonitrile purification column in the production of acrylonitrile.
14	K015	Still bottoms from the distillation of benzylchloride.
15	K016	Heavy ends or distillation residues from the production of carbon tetrachloride.
16	K017	Heavy ends (still bottoms) from the purification column in the production of epichlorohydrin.
17	K018	Heavy ends from the fractionation column in ethyl chloride production.
18	K019	Heavy ends from the distillation of ethylene dichloride in ethylene dichloride production.
19	K020	Heavy ends from the distillation of vinyl chloride in vinyl chloride monomer production.
20	K021	Aqueous spent antimony catalyst waste from fluoromethanes production.
21	K022	Distillation bottom tars from the production of phenol and acetone from cumene.
22	K023	Distillation light ends from the production of phthalic anhydride from naphthalene.
23	K024	Distillation bottoms from the production of phthalic anhydride from naphthalene.
24	K025	Distillation bottoms from the production of nitrobenzene by the nitration of benzene.
25	K026	Stripping still tails from the production of methyl ethyl pyridines.
26	K027	Centrifuge and distillation residues from toluene diisocyanate production.
27	K028	Spent catalyst from the hydrochlorinator reactor in the production of 1,1,1 trichloroethane.
28	K029	Waste from the product stream stripper in the production of 1,1,1 trichloroethane.
29	K030	Column bottoms or heavy ends from the combined production of trichloroethylene and perchloroethylene.
30	K083	Distillation bottoms from aniline production.
31	K085	Distillation or fractionating column bottoms from the production of chlorobenzenes.
32	K093	Distillation light ends from the production of phthalic anhydride from ortho-xylene.
33	K094	Distillation bottoms from the production of phthalic anhydride from ortho-xylene.
34	K095	Distillation bottoms from the production of 1,1,1 trichloroethane.
35	K096	Heavy ends from the heavy ends columns from the production of 1,1,1 trichloroethane.
36	K103	Process residues from aniline extraction from the production of aniline.
37	K104	Combined wastewater streams from nitrobenzene and aniline production.
38	K105	Separated aqueous stream from the reactor product washing step in the production of chlorobenzene.
39	K107	Column bottoms from product separation from the production of 1,1-dimethyl-hydrazine (UDMH) from carboxylic acid hydrazines.
40	K108	Condensed column overheads from product separation and condensed reactor vent gases from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.
41	K109	Spent filter cartridges from product purification from the production of 1,1- dimethylhydrazine (UDMH) from carboxylic acid hydrazides.
42	K110	Condensed column overheads from intermediate separation from the production of 1,1-dimethylhydrazine (UDMH) from carboxylic acid hydrazides.
43	K111	Product washwaters from the production of dinitrotoluene via nitration of toluene.
44	K112	Reaction by-product water from the drying column in the production of toluenediamine via hydrogenation of dinitrotoluene.
45	K113	Condensed liquid light ends from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene.
46	K114	Vicinals from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene.
47	K115	Heavy ends from the purification of toluenediamine in the production of toluenediamine via hydrogenation of dinitrotoluene.
48	K116	Organic condensate from the solvent recovery column in the production of toluene diisocyanate via phosgenation of toluenediamine.
49	K117	Wastewater from the reactor vent gas scrubber in the production of ethylene dibromide via bromination of ethene.
50	K118	Spent adsorbent solids from the purification of ethylene dibromide in the production of ethylene dibromide via bromination of ethene.
51	K136	Still bottoms from the purification of ethylene dibromide in the production of ethylene dibromide via bromination of ethene.
52	K140	Floor sweepings, off-specification product and spent filter media from the production of 2,4,6-tribromophenol.
53	K149	Distillation bottoms from the production of alpha- (or methyl-) chlorinated toluenes, ring- chlorinated toluenes, benzoyl chlorides and compounds with mixtures of those functional groups, excluding still bottoms from the distillation of benzyl chloride.
54	K150	Organic residuals, excluding spent carbon adsorbent, from the spent chlorine gas and hydrochloric acid recovery processes associated with the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides and compounds with mixtures of those functional groups.
55	K151	Wastewater treatment sludge generated during the treatment of wastewaters from the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides and compounds with mixtures of those functional groups, excluding neutralization and biological sludge.
56	K156	Organic waste (including heavy ends, still bottoms, light ends, spent solvents, filtrates and decantates) from the production of carbamates and carbamoyl oximes, excluding waste generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.
57	K157	Wastewaters (including scrubber waters, condenser waters, washwaters and separation waters) from the production of carbamates and carbamoyl oximes, excluding waste generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.
58	K158	Bag house dusts and filter or separation solids from the production of carbamates and carbamoyl oximes, excluding waste generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate.
59	K159	Organics from the treatment of thiocarbamate waste.
60	K161	Purification solids (including filtration, evaporation and centrifugation solids), bag house dust and floor sweepings from the production of dithiocarbamate acids and their salts, excluding substances listed as K125 or K126.
Inorganic chemicals
61	K071	Brine purification sludge from the mercury cell process in chlorine production if separately prepurified brine is not used.
62	K073	Chlorinated hydrocarbon waste from the purification step of the diaphragm cell process using graphite anodes in chlorine production.
63	K106	Wastewater treatment sludge from the mercury cell process in chlorine production.
Pesticides
64	K031	By-product salts generated in the production of monosodium acid methanearsonate (MSMA) and cacodylic acid.
65	K032	Wastewater treatment sludge from the production of chlordane.
66	K033	Wastewater and scrub water from the chlorination of cyclopentadiene in the production of chlordane.
67	K034	Filter solids from the filtration of hexachlorocyclopentadiene in the production of chlordane.
68	K035	Wastewater treatment sludge from the production of creosote.
69	K036	Still bottoms from toluene reclamation distillation in the production of disulfoton.
70	K037	Wastewater treatment sludge from the production of disulfoton.
71	K038	Wastewater from the washing and stripping of phorate production.
72	K039	Filter cake from the filtration of diethylphosphorodithioic acid in the production of phorate.
73	K040	Wastewater treatment sludge from the production of phorate.
74	K041	Wastewater treatment sludge from the production of toxaphene.
75	K042	Heavy ends or distillation residues from the distillation of tetrachlorobenzene in the production of 2,4,5 T.
76	K043	2,6 Dichlorophenol waste from the production of 2,4 D.
77	K097	Vacuum stripper discharge from the chlordane chlorinator in the production of chlordane.
78	K098	Untreated process wastewater from the production of toxaphene.
79	K099	Untreated wastewater from the production of 2,4 D.
80	K123	Process wastewater, including supernates, filtrates and washwaters, from the production of ethylenebisdithiocarbamic acid and its salts.
81	K124	Reactor vent scrubber water from the production of ethylenebisdithiocarbamic acid and its salts.
82	K125	Filtration, evaporation and centrifugation solids from the production of ethylenebisdithiocarbamic acid and its salts.
83	K126	Baghouse dust and floor sweepings in milling and packaging operations from the production or formulation of ethylenebisdithiocarbamic acid and its salts.
84	K131	Wastewater from the reactor and spent sulfuric acid from the acid dryer from the production of methyl bromide.
85	K132	Spent absorbent and wastewater separator solids from the production of methyl bromide.
Explosives
86	K044	Wastewater treatment sludge from the manufacturing and processing of explosives.
87	K045	Spent carbon from the treatment of wastewater containing explosives.
88	K046	Wastewater treatment sludge from the manufacturing, formulation and loading of lead based initiating compounds.
89	K047	Pink and red water from the production of TNT.
Petroleum refining
90	K048	Dissolved air flotation (DAF) float from the petroleum refining industry.
91	K049	Slop oil emulsion solids from the petroleum refining industry.
92	K050	Heat exchanger bundle cleaning sludge from the petroleum refining industry.
93	K051	American Petroleum Institute (API) separator sludge from the petroleum refining industry.
94	K052	Tanks bottoms (leaded) from the petroleum refining industry.
95	K169	Crude oil storage tank sediment from refining petroleum.
96	K170	Clarified slurry oil tank sediment and in-line filter or separation solids from refining petroleum.
97	K171	Spent hydrotreating catalyst from refining petroleum, including guard beds used to desulfurize feeds to other catalytic reactors, excluding inert support media.
98	K172	Spent hydrorefining catalyst from refining petroleum, including guard beds used to desulfurize feeds to other catalytic reactors, excluding inert support media.
Iron and steel
99	K061	Emission control dust and sludge from the primary production of steel in electric furnaces.
100	K062	Spent pickle liquor from steel finishing operations of facilities within the iron and steel industry at steel works, blast furnaces (including coke ovens), rolling mills, iron and steel foundries, gray and ductile iron foundries, malleable iron foundries, steel investment foundries or other miscellaneous steel foundries, or at facilities in the electrometallurgical products (except steel) industry, steel wiredrawing and steel nails and spikes industry, coldrolled steel sheet, strip and bars industry or steel pipes and tubes industry.
Primary copper
101	K064	Acid plant blowdown slurry and sludge resulting from the thickening of blowdown slurry from primary copper production.
Primary lead
102	K065	Surface impoundment solids contained in and dredged from surface impoundments at primary lead smelting facilities.
Primary zinc
103	K066	Sludge from treatment of process wastewater and acid plant blowdown from primary zinc production.
Primary aluminum
104	K088	Spent potliners from primary aluminum reduction.
Ferroalloys
105	K090	Emission control dust or sludge from ferrochromiumsilicon production.
106	K091	Emission control dust or sludge from ferrochromium production.
Secondary lead
107	K069	Emission control dust and sludge from secondary lead smelting.
108	K100	Waste leaching solution from acid leaching of emission control dust and sludge from secondary lead smelting.
Veterinary pharmaceuticals
109	K084	Wastewater treatment sludge from the production of veterinary pharmaceuticals from arsenic or organo arsenic compounds.
110	K101	Distillation tar residues from the distillation of aniline based compounds in the production of veterinary pharmaceuticals from arsenic or organo arsenic compounds.
111	K102	Residue from the use of activated carbon for decolourization in the production of veterinary pharmaceuticals from arsenic or organo arsenic compounds.
Ink formulation
112	K086	Solvent washes and sludge, caustic washes and sludge or water washes and sludge from cleaning tubs and equipment used in the formulation of ink from pigments, driers, soaps and stabilizers containing chromium and lead.
Coking
113	K060	Ammonia still lime sludge from coking operations.
114	K087	Decanter tank tar sludge from coking operations.
115	K141	Process residues from the recovery of coal tar, including collecting sump residues from the production of coke from coal and the recovery of coke by-products produced from coal, excluding waste listed as K087.
116	K142	Tar storage tank residues from the production of coke from coal or from the recovery of coke by-products produced from coal.
117	K143	Process residues from the recovery of light oil, including those generated in stills, decanters and wash oil recovery units from the recovery of coke by- products produced from coal.
118	K144	Wastewater sump residues from light oil refining, including intercepting or contamination sump sludge from the recovery of coke by-products produced from coal.
119	K145	Residues from naphthalene collection and recovery operations from the recovery of coke by-products produced from coal.
120	K147	Tar storage tank residues from coal tar refining.
121	K148	Residues from coal tar distillation, including still bottoms.

Date modified:: 2024-12-10