St. Anthony Airport Zoning Regulations (SOR/94-121)

PART IDescription of the Airport Reference Point

The airport reference point, shown on St. Anthony Airport Zoning Plan No. S-2211-2 dated March 30, 1990, is determined by measuring 610 m along the centre line of runway 11-29 from the westerly end of runway 11;

THENCE measuring southerly, at right angles to the centre line of runway 11-29, 150 m to the airport reference point, said point having Newfoundland Transverse Mercator Projection Grid Coordinates of North 5,694,747.54 m and East 298,969.50 m.

PART IIDescription of the Approach Surfaces

The approach surfaces, shown on St. Anthony Airport Zoning Plans Nos. S-2211-1, S-2211-2 and S-2211-3, dated March 30, 1990, are planes abutting each end of the strip associated with runway 11-29 and are described as follows:

• (a) an inclined plane abutting the end of the strip associated with the approach to runway 11 having a ratio of 1 m measured vertically to 50 m measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 15 000 m measured horizontally from the end of the strip; the outer ends of the imaginary horizontal line being 2 400 m from the projected centre line; said imaginary horizontal line being 300 m above the elevation at the end of the strip; and

• (b) an inclined plane abutting the end of the strip associated with the approach to runway 29 having a ratio of 1 m measured vertically to 50 m measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 15 000 m measured horizontally from the end of the strip; the outer ends of the imaginary horizontal line being 2 400 m from the projected centre line; said imaginary horizontal line being 300 m above the elevation at the end of the strip.

PART IIIDescription of the Outer Surface

The outer surface, shown on St. Anthony Airport Zoning Plan No. S-2211-2, dated March 30, 1990, is an imaginary plane established at a constant elevation of 45 m above the elevation of the airport reference point, except that, where that plane is less than 9 m above the surface of the ground, the outer surface is located at 9 m above the surface of the ground.

PART IVDescription of the Strip

The strip associated with runway 11-29, shown on St. Anthony Airport Zoning Plan No. S-2211-2 dated March 30, 1990, is 300 m in width, 150 m being on each side of the centre line of the runway, and 1 340 m in length.

PART VDescription of Each Transitional Surface

Each transitional surface, shown on St. Anthony Airport Zoning Plan No. S-2211-2, dated March 30, 1990, is an inclined plane rising at a ratio of 1 m measured vertically to 7 m measured horizontally at right angles to the centre line and projected centre line of the strip, extending upward and outward from the lateral limits of the strip and its approach surfaces to an intersection with the outer surface.

PART VIDescription of the Outer Limit

The outer limit, shown on St. Anthony Airport Zoning Plan No. S-2211-2, dated March 30, 1990, is a circle with a radius of 4 000 m centred on the airport reference point.