Deer Lake Airport Zoning Regulations (SOR/86-1135)

PART IDescription of the Airport Reference Point

The airport reference point, shown on Public Works Canada Deer Lake Airport Zoning Plans S-441-3, S-441-4, S-441-5 and S-441-6, dated November 30, 1984, is determined by measuring 975.36 m southwesterly along the centre line and centre line produced of runway 07-25 from the 07 end of the strip and thence measuring northwesterly at right angles 152.40 m from the centre line of the said runway 07-25.

PART IIDescription of the Approach Surfaces

The approach surfaces, shown on Public Works Canada Deer Lake Airport Zoning Plans S-441-1 to S-441-8 inclusive, dated November 30, 1984, are surfaces abutting each end of the strip associated with the runway designated 07-25 and are described as follows:

• (a) a surface abutting the end of the strip associated with runway approach 07 consisting of an inclined plane having a ratio of 1 m measured vertically to 50 m measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 15 000 m measured horizontally from the end of the strip; the outer ends of the imaginary horizontal line being 2 400 m from the projected centre line; said imaginary horizontal line being 300 m measured vertically above the elevation at the end of the strip; and

• (b) a surface abutting the end of the strip associated with runway approach 25 consisting of an inclined plane having a ratio of 1 m measured vertically to 50 m measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 15 000 m measured horizontally from the end of the strip; the outer ends of the imaginary horizontal line being 2 400 m from the projected centre line; said imaginary horizontal line being 300 m measured vertically above the elevation at the end of the strip.

PART IIIDescription of the Outer Surface

The outer surface, shown on Public Works Canada Deer Lake Airport Zoning Plans S-441-3, S-441-4, S-441-5 and S-441-6, dated November 30, 1984, is an imaginary surface located at a common plane established at a constant elevation of 45 m above the assigned elevation of the airport reference point, except that, where that common plane is less than 9 m above the surface of the ground, the imaginary surface is located at 9 m above the surface of the ground.

PART IVDescription of the Strip

The strip associated with runway 07-25, as shown on Public Works Canada Deer Lake Airport Zoning Plans S-441-3, S-441-4, S-441-5 and S-441-6, dated November 30, 1984, is 300 m in width, 150 m on each side of the centre line of the runway, and 1 948.8 m in length.

PART VDescription of Each Transitional Surface

Each transitional surface, shown on Public Works Canada Deer Lake Airport Zoning Plans S-441-3, S-441-4, S-441-5 and S-441-6, dated November 30, 1984, is a surface consisting of an inclined plane rising at a ratio of 1 m measured vertically to 7 m measured horizontally at right angles to the centre line and centre line produced of the strip extending upward and outward from the lateral limits of the strip and its approach surfaces to an intersection with the outer surface.

PART VIDescription of the Outer Limits of Lands

The boundary of the outer limits of lands, shown on Public Works Canada Deer Lake Airport Zoning Plans S-441-3, S-441-4, S-441-5 and S-441-6, dated November 30, 1984, is a circular area having a radius of 4 000 m from the airport reference point.