Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Charlo Airport Zoning Regulations (SOR/78-771)

Regulations are current to 2024-10-30

SCHEDULE(ss. 2 and 4)

PART IDescription of Airport Reference Point Charlo Airport, County of Restigouche, New Brunswick

Being a point measured five hundred (500) feet perpendicular and northerly from a centreline point three thousand (3,000) feet westerly from the easterly end of the runway and having co-ordinate values of N. 1,544,317.27 feet and E. 1,041,507.02 feet, with reference to the New Brunswick Horizontal Control System.

PART IIDescription of the Outer Limits of Lands

A circular area having a radius of thirteen thousand (13,000) feet from the airport reference point as shown on Department of Transport Plans S-424B, C, D and E, dated September 2, 1977.

PART IIIDescription of the Approach Surface

Being an imaginary surface abutting each end of the strip consisting of an inclined plane having a ratio of one and sixty-six hundredths (1.66) feet measured vertically to one hundred (100) feet measured horizontally rising to an imaginary horizontal line drawn parallel to and ten thousand (10,000) feet measured horizontally from, each end of the strip, thence the approach surface shall rise at a ratio of two (2) feet measured vertically to one hundred (100) feet measured horizontally to an imaginary horizontal line drawn parallel to, and fifty thousand (50,000) feet measured horizontally from, each end of the strip and located at a height of nine hundred and sixty-six (966) feet above the elevation at each end of the strip, the outer ends of each surface being eight thousand (8,000) feet on each side of the projected centreline as shown on Department of Transport Plans S-424A, B, C, D, E and F dated September 2, 1977.

PART IVDescription of the Outer Surface

Being an imaginary surface consisting of

  • (a) a common plane established at a constant elevation of one hundred and fifty (150) feet above the assigned elevation of the airport reference point, and

  • (b) where the common plane described in paragraph (a) is less than thirty (30) feet above the surface of the ground, an imaginary surface located thirty (30) feet above the surface of the ground,

which outer surface is shown on Department of Transport Plans S-424B, C, D and E, dated September 2, 1977.

PART VDescription of the Strip

The strip is one thousand (1,000) feet in width, five hundred (500) feet being on each side of the centreline of the runway, and six thousand four hundred (6,400) feet in length as shown on Department of Transport Plan S-424C dated September 2, 1977.

PART VIDescription of Each Transitional Surface

Being an imaginary surface consisting of an inclined plane rising at a ratio of one (1) foot measured vertically to seven (7) feet measured horizontally at right angles to the centre line and centre line produced of the strip, and extending upward and outward from the lateral limits of the strip and its approach surfaces to an intersection with the outer surface as shown on Department of Transport Plan S-424C dated September 2, 1977.

 

Date modified: