Prohibition of the Manufacture and Importation of Wheel Weights Containing Lead Regulations (SOR/2023-15)

Full Document:

Regulations are current to 2024-10-30 and last amended on 2024-02-03. Previous Versions

SCHEDULE(Subsections 4(1) and 6(2))Information to be Contained in an Application for a Permit or Renewal of a Permit

1 Information respecting the applicant:
- (a) their name, civic and postal addresses in Canada, telephone number and, if any, fax number and email address; and
- (b) the name, title, civic and postal addresses in Canada, telephone number and, if any, fax number and email address of any authorized representative.
2 Information respecting the product:
- (a) in the case of an application for a permit,
  - (i) the common or generic name of the product and its trade name, if any,
  - (ii) the estimated number of wheel weights to be imported or manufactured and the estimated total quantity of lead contained in the wheel weights, expressed in kilograms, and
  - (iii) the type of vehicle for which the product is designed; and
- (b) in the case of an application for the renewal of a permit, the information specified in paragraph (a) as well as information specifying the number of wheel weights manufactured or imported under the terms of the initial permit and the total quantity of lead contained in the wheel weights, expressed in kilograms.
3 Information establishing that, at the time of the application, there is no alternative to the manufacture or importation of wheel weights containing lead or, if there is an alternative, that it is not technically or economically feasible for the applicant.
4 The requested term of the permit.
5 The civic and postal addresses of the location where the records referred to in section 10 of these Regulations are retained in Canada.