Marine Personnel Regulations (SOR/2007-115)

Regulations are current to 2019-06-20 and last amended on 2019-03-04. Previous Versions

PART 1Certification (continued)

Engineering Officers (continued)

Third-class Engineer, Motor Ship or Steamship

  •  (1) An applicant for a Third-class Engineer, Motor Ship or Steamship certificate who holds a Fourth-class Engineer certificate with STCW endorsement for the same type of vessel to which the certificate sought relates shall meet the requirements set out in column 1 of the table to this subsection and the corresponding specifications set out in column 2.

    TABLE

    ItemColumn 1Column 2
    RequirementsSpecifications
    1Hold a certificateFourth-class Engineer certificate with STCW endorsement.
    2Experience

    After having acquired the qualifying service required for a Fourth-class Engineer, Motor Ship or Steamship certificate, acquire at least 12 months of qualifying service as follows:

    • (a) at least 6 months of sea service as engineer in charge of the engineering watch or in charge of the machinery on one or more of the following vessels that have a propulsive power of at least 500 kW:

      • (i) a motor vessel other than a stationary MOU, in the case of an applicant for a motor ship certificate, or

      • (ii) on a steamship, in the case of an applicant for a steamship certificate;

    • (b) up to 3 months of qualifying service in respect of attendance at a program or course, other than an approved training course, at a maximum rate of one day of service for every three days of attendance, if

      • (i) the program or course substantially covers the subject-matter of at least one of the examinations referred to in item 4, and

      • (ii) the applicant provides a testimonial indicating that the applicant has successfully completed that program or course; and

    • (c) any remaining time in a combination of the following types of service on one or more of the following vessels that have a power of at least 500 kW:

      • (i) up to 3 months as an engineer on day work on board a vessel,

      • (ii) up to 3 months of qualifying service in respect of time spent in laying up, fitting out or refitting as an engineer on board a vessel to be credited at a maximum rate of one day of qualifying service for each calendar day of at least 8 hours of work,

      • (iii) service as an engineer on board a vessel without a propulsion system that is a motor or steam dredge, an MOU, a floating elevator or a similar vessel, to be credited at a rate of one-half the time served counting as qualifying service, and

      • (iv) service as an engine-room rating performing watchkeeping duties in an engine room on board a motor vessel or steamship, to be credited at a rate of one-third the time served counting as qualifying service.

    3Certificates to be provided to the examiner
    • (a) MED with respect to STCW basic safety;

    • (b) MED training with respect to proficiency in survival craft and rescue boats other than fast rescue boats;

    • (c) MED in advanced fire fighting;

    • (d) MED for senior officers;

    • (e) marine advanced first aid; and

    • (f) ship watchkeeping practices taught using a propulsive plant simulator.

    4Pass examinations
    • (a) The following written examinations at the third-class engineer level, after obtaining a Fourth-class Engineer certificate:

      • (i) applied mechanics,

      • (ii) thermodynamics,

      • (iii) electrotechnology, and

      • (iv) applied mathematics;

    • (b) an examination on ship watchkeeping practices using a propulsive plant simulator, after providing the certificate referred to in paragraph 3(f);

    • (c) written examination on general engineering knowledge at the third-class level, after meeting the requirements of items 2 and 3 and paragraphs (a) and (b);

    • (d) one of the following written examinations at the third-class level, after meeting the requirements of paragraph (c):

      • (i) engineering knowledge of motor vessels, in the case of an applicant for a Third-class Engineer, Motor Ship certificate, or

      • (ii) engineering knowledge of steamships, in the case of an applicant for a Third-class Engineer, Steamship certificate; and

    • (e) oral examination on the knowledge set out in paragraphs (a) to (d) and a knowledge of the legislation relevant to the certificate sought, after passing the examination referred to in paragraph (d).

  • (2) An applicant for a Third-class Engineer, Motor Ship certificate who holds a First-class, Second-class or Third-class Engineer, Steamship certificate shall

    • (a) after obtaining a Fourth-class Engineer, Motor Ship or Steamship certificate, acquire at least 6 months of service as an engineer on one or more motor vessels that have a propulsive power of at least 500 kW other than stationary MOUs; and

    • (b) pass a written and an oral examination to determine whether they have the engineering knowledge required by subparagraph 4(d)(i) of the table to subsection (1).

  • (3) An applicant for a Third-class Engineer, Steamship certificate who holds a First-class, Second-class or Third-class Engineer, Motor Ship certificate shall

    • (a) after obtaining a Fourth-class Engineer, Motor Ship or Steamship certificate, acquire at least 6 months of service as an engineer on one or more steamships that have a propulsive power of at least 500 kW; and

    • (b) pass a written and an oral examination to determine whether they have the engineering knowledge required by subparagraph 4(d)(ii) of the table to subsection (1).

Fourth-class Engineer, Motor Ship or Steamship

  •  (1) An applicant for a Fourth-class Engineer, Motor Ship or Steamship certificate shall meet the requirements set out in column 1 of the table to this subsection and the corresponding specifications set out in column 2.

    TABLE

    ItemColumn 1Column 2
    RequirementsSpecifications
    1Hold a certificateNo certificate is required, but the requirements set out in subsections (3) and (4) apply to the establishment of equivalency between the certificate held and the certificate sought.
    2Experience

    Either having successfully completed a 3-year approved cadet training program in marine engineering or having acquired at least 36 months of qualifying service comprising the following:

    • (a) at least 6 months as an engineer, engine-room rating or assistant engineer, performing the duties set out in subsection (2) in an engine room on one or more of the following vessels the main engines of which have a total power of at least 500 kW:

      • (i) a motor vessel, in the case of an applicant for a motor ship certificate, or

      • (ii) a steamship, in the case of an applicant for a steamship certificate;

    • (b) a credit of 6 months of qualifying service if the applicant submits the certificate referred to in subparagraph 3(f)(i); and

    • (c) any remaining time in any combination of the following types of service:

      • (i) up to 12 months of fitting, erecting or repairing machinery,

      • (ii) up to 6 months of metal turning,

      • (iii) up to 6 months of brass finishing,

      • (iv) up to 6 months of planing, slotting, shaping and milling,

      • (v) up to 3 months of welding,

      • (vi) up to 6 months in a drafting office as mechanical or electrical drafter engaged in arrangement, detail or design drawings,

      • (vii) up to 24 months as an engineer or assistant engineer on day work,

      • (viii) up to 6 months as an engineer, engine-room rating, assistant engineer or electrician during the fitting out, laying up or refitting of one or more vessels,

      • (ix) up to 24 months as the person responsible for operating pumps on one or more tankers,

      • (x) up to 24 months as an engine-room rating or assistant engineer performing watchkeeping duties in an engine room on board one or more towed barges or similar vessels, the boiler or boilers of which have a total heating surface of at least 92.9 m2,

      • (xi) up to 9 months as person responsible for operating tunnel machinery on one or more self-unloading bulk cargo ships,

      • (xii) up to 24 months as an electrician on one or more vessels that have a rated generator capacity of at least 300 kW,

      • (xiii) a credit of 12 months of service for successful completion of an approved training program in diesel engines,

      • (xiv) a credit of up to 3 months of service for each of the following courses that has been successfully completed, at an institution recognized by a provincial government or foreign administration:

        • (A) applied mechanics,

        • (B) thermodynamics,

        • (C) machine design,

        • (D) electrotechnology, and

        • (E) naval architecture, and

        • (xv) a credit of 12 months of service for successful completion, at an institution recognized by a provincial government or foreign administration, of a training program in mechanical or electrical engineering.

    3Certificates and other documents to be provided to the examiner
    • (a) MED with respect to STCW basic safety;

    • (b) MED training with respect to proficiency in survival craft and rescue boats other than fast rescue boats;

    • (c) MED in advanced fire fighting;

    • (d) marine advanced first aid;

    • (e) ship watchkeeping practices taught using a propulsive plant simulator; and

    • (f) for the sole purpose of obtaining a certificate with an STCW endorsement,

      • (i) practical skills for marine engineers, and

      • (ii) approved training record book for applicants for a Fourth-class Engineer certificate completed under the supervision of the vessel’s chief engineer.

    4Pass examinations
    • (a) An examination on ship watchkeeping practices using a propulsive plant simulator, after providing the certificate referred to in paragraph 3(e);

    • (b) after meeting the requirements of items 2 and 3 and paragraph (a), a written examination on general engineering knowledge at the fourth-class level;

    • (c) one of the following written examinations at the fourth-class level, after meeting the requirements of paragraph (b):

      • (i) in the case of an applicant for a Fourth-class Engineer, Motor Ship certificate, engineering knowledge of motor vessels, or

      • (ii) in the case of an applicant for a Fourth-class Engineer, Steamship certificate, engineering knowledge of steamships; and

    • (d) oral examination on the knowledge set out in paragraphs (a) to (c) and knowledge of the legislation relevant to the certificate sought, after passing the examination referred to in paragraph (c).

  • (2) The qualifying service set out in paragraph 2(a) of the table to subsection (1) shall include the following duties:

    • (a) preparing main machinery and auxiliary equipment for sea;

    • (b) shutting down main machinery;

    • (c) operating main machinery;

    • (d) preparing, starting, coupling and changing over alternators and generators;

    • (e) transferring fuel;

    • (f) preparing and operating evaporators and distillation plants;

    • (g) operating oily water separators and conducting appropriate tests to ensure the correct operation of those separators;

    • (h) preparing and operating air compressors;

    • (i) preparing and starting steering gear and conducting appropriate tests to ensure the correct operation of the steering gear;

    • (j) testing boiler water-level gauges under normal working conditions;

    • (k) operating boilers, including the combustion system;

    • (l) transferring ballast and fresh water;

    • (m) lubricating machinery;

    • (n) pumping bilges;

    • (o) taking machinery readings and compiling the data in the engine-room log books; and

    • (p) acting as assistant to the engineer in charge of the engineering watch.

  • (3) An applicant for a Fourth-class Engineer, Motor Ship certificate who holds a First-class, Second-class, Third-class or Fourth-class Engineer, Steamship certificate shall

    • (a) after obtaining a Fourth-class Engineer, Steamship certificate, acquire at least 6 months of service as an engineer on one or more motor vessels that have a propulsive power of at least 500 kW, other than stationary MOUs; and

    • (b) pass a written and an oral examination to determine whether they have the engineering knowledge required by subparagraph 4(c)(i) of the table to subsection (1).

  • (4) An applicant for a Fourth-class Engineer, Steamship certificate who holds a First-class, Second-class, Third-class or Fourth-class Engineer, Motor Ship certificate shall

    • (a) after obtaining a Fourth-class Engineer, Motor Ship certificate, acquire at least 6 months of service as an engineer on one or more steamships that have a propulsive power of at least 500 kW; and

    • (b) pass a written and an oral examination to determine whether they have the engineering knowledge required by subparagraph 4(c)(ii) of the table to subsection (1).

 
Date modified: