Transportation of Dangerous Goods Regulations

1.22 (1) Part 3 (Documentation), Part 4 (Dangerous Goods Safety Marks) and Part 5 (Means of Containment) do not apply to the handling, offering for transport or transporting of dangerous goods on a road vehicle if

• (a) in the case of

  • (i) dangerous goods included in Class 2, Gases, they are in one or more means of containment in compliance with the requirements for transporting gases in Part 5 (Means of Containment), or

  • (ii) dangerous goods not included in Class 2, Gases, they are in one or more means of containment designed, constructed, filled, closed, secured and maintained so that under normal conditions of transport, including handling, there will be no accidental release of the dangerous goods that could endanger public safety;

• (b) the dangerous goods are transported solely on land between a retail place of purchase and place of destination and the distance on public roads is less than or equal to 100 km;

• (c) the gross mass of all dangerous goods on the road vehicle is less than or equal to 3 000 kg;

• (d) the dangerous goods are to be or have been used by a farmer for farming purposes; and

• (e) the dangerous goods do not include

  • (i) Class 1, Explosives, other than explosives included in Class 1.4S,

  • (ii) Class 2.1, Flammable Gases, in a cylinder with a capacity greater than 46 L,

  • (iii) Class 2.3, Toxic Gases,

  • (iv) Class 6.2, Infectious Substances, or

  • (v) Class 7, Radioactive Materials.

(2) Despite the exemption from Part 3 (Documentation) in subsection (1), when an ERAP is required under Part 7 (Emergency Response Assistance Plan) the dangerous goods for which the plan is required must be accompanied by a shipping document.