Pacific Fishery Regulations, 1993
54 (1) Where a close time set out in Part I of Schedule VI is varied pursuant to section 6 of the Fishery (General) Regulations to permit salmon fishing by gill net, the notice referred to in section 7 of the Fishery (General) Regulations shall specify one of the gill net mesh sizes set out in column I, one of the maximum gill net depth limits set out in column II, one of the maximum gill net hang ratios set out in column III, one of the minimum corkline to web distances set out in column V and one of the maximum corkline to web distances set out in column VI of the table to this section.
(2) Where a close time has been varied to permit salmon fishing with a gill net in accordance with subsection (1), no person shall fish for salmon with a gill net that has
(a) any meshes that are not contiguous and uniform in size;
(b) a mesh size other than that specified in the notice;
(c) a depth greater than the maximum depth specified in the notice;
(d) webbing with a total length, when compared to the length of the corkline to which it is hung, in a ratio greater than the maximum hang ratio specified in the notice; or
(e) a corkline to web distance less than the minimum corkline to web distance or greater than the maximum corkline to web distance specified in the notice.
(3) Where a close time set out in an item of Part I of Schedule VI is varied pursuant to section 6 of the Fishery (General) Regulations to permit salmon fishing with a purse seine, the notice referred to in section 7 of the Fishery (General) Regulations shall specify one of the minimum purse seine bunt mesh sizes set out in column IV of the table to this section.
(4) Where a close time has been varied to permit salmon fishing with a purse seine in accordance with subsection (3), no person shall fish for salmon with a purse seine that has, in the final 18 m of the bunt, a mesh size that is less than the minimum bunt mesh size specified in the notice.
Column I Column II Column III Column IV Column V Column VI Gill Net Mesh Sizes Maximum Gill Net Depth Limits Maximum Gill Net Hang Ratios Minimum Purse Seine Bunt Mesh Sizes Minimum Corkline to Web Distances Maximum Corkline to Web Distances Not exceeding 114 mm 60 meshes 1:1 100 mm 0 cm 0 cm Not exceeding 121 mm 90 meshes 1.5:1 70 mm 45 cm 45 cm Not exceeding 124 mm 2:1 76 cm 76 cm Not exceeding 127 mm 2.5:1 1.0 m 1.0 m Not exceeding 133 mm 3:1 1.2 m 1.2 m Not exceeding 137 mm 1.5 m 1.5 m Not exceeding 140 mm 2.0 m 2.0 m Not exceeding 150 mm Not exceeding 165 mm Not exceeding 188 mm Not exceeding 216 mm Not less than 100 mm Not less than 149 mm Not less than 158 mm Not less than 171 mm Not less than 203 mm Not less than 216 mm
- SOR/94-391, s. 3
- SOR/97-267, s. 2
- SOR/2022-196, s. 20
- Date modified: