Playpens Regulations (SOR/2018-186)
Full Document:
- HTMLFull Document: Playpens Regulations (Accessibility Buttons available) |
- XMLFull Document: Playpens Regulations [139 KB] |
- PDFFull Document: Playpens Regulations [1488 KB]
Regulations are current to 2024-03-06 and last amended on 2019-04-03. Previous Versions
AMENDMENTS NOT IN FORCE
— SOR/2022-122, s. 9
9 Section 3 of the Playpens RegulationsFootnote 5 is replaced by the following:
Return to footnote 5SOR/2018-186
Stickers, films and surface coating materials
3 (1) A sticker, film or other similar material that can be removed, or a surface coating material, that is applied to an accessible part of a playpen or accessory must not contain, when it is tested in accordance with a method that conforms to good laboratory practices,
(a) more than 90 mg/kg total lead;
(b) any compound of antimony, arsenic, cadmium, selenium or barium if more than 1 000 mg/kg of the compound migrates from the material; or
(c) more than 10 mg/kg total mercury.
Definition of accessible part and surface coating material
(2) For the purposes of subsection (1), accessible part and surface coating material have the same meanings as in section 1 of the Surface Coating Materials Regulations.
- Date modified: