Energy Efficiency Regulations, 2016

Marginal note:Information

• 756 (1) For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a small electric motor:

  • (a) its average full load efficiency;

  • (b) its type, namely, capacitor-start capacitor-run, capacitor-start induction-run or polyphase; and

  • (c) if the motor is one for which a unique motor identifier has not been provided under paragraph 5(1)(c), its nominal output power expressed in kilowatts (horsepower) and the number of poles.

• Marginal note:Standard

  (2) The information must be collected in accordance with one of the following standards:

  • (a) if the motor is polyphase and has a nominal output power ≥ 0.18 kW (0.25 horsepower) but ≤ 0.75 kW (1 horsepower), CSA C747-09, IEEE 112 (Test Method A) or IEC 60034-2-1 (Test Method 2-1-1A);

  • (b) if the motor is polyphase and has a nominal output power > 0.75 kW (1 horsepower) but ≤ 2.2 kW (3 horsepower), CSA C390-10, IEEE 112 (Test Method B) or IEC 60034-2-1 (Test Method 2-1-1B); or

  • (c) if the motor is capacitor-start capacitor-run or capacitor-start induction-run, CSA C747-09, IEEE 114-2010 or IEC 60034-2-1 (Test Method 2-1-1A).