Energy Efficiency Regulations, 2016

Marginal note:Energy efficiency standards

• 751 (1) The energy efficiency standards set out in column 3 of the table to this section apply to electric motors described in column 1 that are manufactured during the periods set out in column 4.

• Marginal note:Testing standard

  (2) An electric motor complies with the energy efficiency standard if it meets the standard when tested at 100% of its nominal full load in accordance with testing procedures established by the standard set out in column 2 that are applicable to an electric motor as defined in section 749.

  	Column 1	Column 2	Column 3	Column 4
  Item	Energy-using Product	Testing Standard	Energy Efficiency Standard	Period of Manufacture
  1	Electric motors that are fire-pump motors	CSA C390-10, IEEE 112 or IEC 60034-2-1	CSA C390-10, Table 2	On or after February 3, 1995
  2	Electric motors that are medical-imaging motors	CSA C390-10, IEEE 112 or IEC 60034-2-1	NEMA MG-1, Table 12-12	On or after June 1, 2017
  3	Electric motors that are part of an integral gear assembly;	CSA C390-10	CSA C390-10, Table 2	On or after November 27, 1999 and before June 1, 2016
  4	Electric motors that are close-coupled pump motors	CSA C390-10	CSA C390-10, Table 2	On or after January 1, 2011 and before June 1, 2016
  5	Electric motors that are vertically-mounted solid shaft normal thrust motors	CSA C390-10	CSA C390-10, Table 2	On or after January 1, 2011 and before June 1, 2016
  6	Electric motors that (a) have an eight-pole construction; (b) have NEMA U frame dimensions; (c) are a NEMA design C or an IEC design H; (d) have a nominal output power of more than 150 kW (200 HP) and are a NEMA design B or an IEC design N; or (e) are footless.	CSA C390-10	CSA C390-10, Table 2	On or after January 1, 2011 and before June 1, 2016
  7	Electric motors other than motors described in items 1 to 6	CSA C390-10	CSA C390-10, Table 3	On or after February 3, 1995 and before June 1, 2016
  8	Electric motors other than fire-pump motors or medical-imaging motors	CSA C390-10, IEEE 112 or IEC 60034-2-1	NEMA MG-1, Table 12-12	On or after June 1, 2016