Energy Efficiency Regulations, 2016

Marginal note:Energy-using product

• 750 (1) A motor is prescribed as an energy-using product.

• Marginal note:Limits

  (2) However, for the purposes of sections 4, 5, 751 and 752, a motor is not considered to be an energy-using product

  • (a) if it was manufactured before February 3, 1995;

  • (b) if it was manufactured before November 27, 1999 and is an explosion-proof motor or a motor that is part of an integral gear assembly;

  • (c) if it was manufactured before January 1, 2011 and it

    • (i) has an eight-pole construction,

    • (ii) has NEMA U frame dimensions,

    • (iii) is a NEMA design C or an IEC design H,

    • (iv) is a close-coupled pump motor,

    • (v) is a vertically mounted solid shaft normal thrust motor,

    • (vi) is a fire pump motor or other NEMA design B motor with a nominal output power of more than 150 kW (200 horsepower) or is an IEC design N motor with a nominal output power of more than 150 kW (200 horsepower), or

    • (vii) is footless;

  • (d) if it was manufactured before June 1, 2016 and it

    • (i) is a NEMA design A with an output power of more than 150 kW (200 horsepower),

    • (ii) is an enclosed NEMA design with a NEMA frame number of 56,

    • (iii) has NEMA frame dimensions other than T or U,

    • (iv) has an IEC frame number of 80 or more but less than 90,

    • (v) is a partial electric motor, a brake motor or a vertical hollow shaft motor,

    • (vi) is designed to operate continuously in free air, but can operate continuously for a period of at least 30 minutes while completely immersed,

    • (vii) has a separately powered blower,

    • (viii) has a base, end shields or flanges that are not within the dimensions specified in NEMA MG-1, or

    • (ix) has a NEMA shaft that is not a standard shaft, R-shaft or S-shaft, as specified in NEMA MG-1; or

  • (e) if it is manufactured before June 1, 2017 and is a medical imaging motor.