Energy Efficiency Regulations, 2016

Marginal note:Information

• 706 (1) For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of a dry-type transformer:

  • (a) if applicable, information that indicates whether the transformer is in the 1.2 kV voltage class;

  • (b) its BIL rating;

  • (c) if applicable, information that indicates whether the transformer is a three-phase transformer that has multiple high-voltage windings and a voltage ratio other than 2:1;

  • (d) its kVA rating;

  • (e) its phase — namely, single-phase or three-phase;

  • (f) the tested efficiency, expressed as a percentage;

  • (g) the loss, expressed in watts, when it is under load and when it is not under load; and

  • (h) if it is manufactured on or after January 1, 2010, the impedance, expressed as a percentage.

• Marginal note:Standard

  (2) The information must be collected in accordance with one of the following standards:

  • (a) CSA C802.2-12, if the product was manufactured on or after January 1, 2005 and before January 1, 2016; or

  • (b) 10 C.F.R. Appendix A, if the product is manufactured on or after January 1, 2016.