Energy Efficiency Regulations, 2016

Marginal note:Energy efficiency standards

• 451 (1) The energy efficiency standards set out in column 3 of the table to this section apply to fluorescent lamp ballasts described in column 1 that are manufactured during the periods described in column 4.

• Marginal note:Testing standard

  (2) A fluorescent lamp ballast complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a fluorescent lamp ballast as defined in section 449.

  	Column 1	Column 2	Column 3	Column 4
  Item	Energy-using Product	Testing Standard	Energy Efficiency Standard	Period of Manufacture
  1	Fluorescent lamp ballasts	CSA C654-10	CSA C654-10, clause 4 for power factor CSA C654-10, Table 2 for ballast efficacy factor	On or after February 3, 1995 and before November 14, 2014
  2	Fluorescent lamp ballasts, other than T12 dimming ballasts	CSA C654-14 or 10 C.F.R. Appendix Q	CSA C654-14, clause 4 for power factor CSA C654-14, clause 5.2 for ballast luminous efficiency	On or after November 14, 2014
  3	T12 dimming ballasts that are low-frequency and designed to operate one F34T12 lamp	CSA C654-14 or 10 C.F.R. Appendix Q	CSA C654-14, clause 4 for power factor Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)	On or after November 14, 2014
  4	T12 dimming ballasts that are high-frequency and designed to operate one F34T12 lamp	CSA C654-14 or 10 C.F.R. Appendix Q	CSA C654-14, clause 4 for power factor Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)	On or after November 14, 2014
  5	T12 dimming ballasts that are low-frequency and designed to operate two F34T12 lamps	CSA C654-14 or 10 C.F.R. Appendix Q	CSA C654-14, clause 4 for power factor Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)	On or after November 14, 2014
  6	T12 dimming ballasts that are high-frequency and designed to operate two F34T12 lamps	CSA C654-14 or 10 C.F.R. Appendix Q	CSA C654-14, clause 4 for power factor Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)	On or after November 14, 2014
  7	T12 dimming ballasts that are low-frequency and designed to operate two F96T12/ES lamps	CSA C654-14 or 10 C.F.R. Appendix Q	CSA C654-14, clause 4 for power factor Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)	On or after November 14, 2014
  8	T12 dimming ballasts that are high-frequency and designed to operate two F96T12/ES lamps	CSA C654-14 or 10 C.F.R. Appendix Q	CSA C654-14, clause 4 for power factor Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)	On or after November 14, 2014
  9	T12 dimming ballasts that are low-frequency and designed to operate two F96T12HO/ES lamps	CSA C654-14 or 10 C.F.R. Appendix Q	CSA C654-14, clause 4 for power factor Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)	On or after November 14, 2014
  10	T12 dimming ballasts that are high-frequency and designed to operate two F96T12HO/ES lamps	CSA C654-14 or 10 C.F.R. Appendix Q	CSA C654-14, clause 4 for power factor Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)	On or after November 14, 2014