Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

PCB Regulations

Version of section 33 from 2015-01-01 to 2024-10-30:


Marginal note:End of use of equipment and liquids — 2009

  •  (1) The owner of the equipment referred to in paragraph 16(1)(a) or subparagraph 16(1)(b)(i) — other than the equipment for which an extension is granted by the Minister in accordance with section 17 and the equipment referred to in subsection 16(2) or (2.1) — or of the liquids referred to in subsection 15(2) shall prepare a report that is current to December 31 of each calendar year in which the person owns the equipment or the liquids and that contains the following information:

    • (a) the name, civic and mailing addresses, telephone number, fax number, if any, and e-mail address, if any, of the owner and any person authorized to act on the owner’s behalf;

    • (b) for each piece of equipment, the civic addresses of the facilities where the equipment and liquids are located or, if there is no civic address, their location using the owner’s site identification system;

    • (c) for each piece of equipment, the quantity of liquids containing PCBs in the equipment and of liquids, expressed in litres, the quantity of solids containing PCBs in the equipment, expressed in kilograms, and the concentration of PCBs in the liquids and solids, expressed in mg/kg,

      • (i) that are in use on December 31,

      • (ii) that are stored on December 31 at the person’s PCB storage site,

      • (iii) that are sent, in that calendar year, to an authorized facility that is a transfer site,

      • (iv) that are sent, in that calendar year, to an authorized facility that is authorized to destroy them, or

      • (v) that are destroyed in that calendar year; and

    • (d) a certification that the information is accurate and complete and that is dated and signed by the owner or by a person authorized to act on the owner’s behalf.

  • Marginal note:Equipment and liquids with extension

    (2) The owner of the equipment referred to in paragraph 16(1)(a) or subparagraph 16(1)(b)(i) — other than the equipment referred to in subsection 16(2) or (2.1) — or of the liquids referred to in subsection 15(2) for which an extension is granted by the Minister in accordance with section 17 shall prepare a report that is current to December 31 of each calendar year in which the person owns the equipment or the liquids and that contains the following information for each piece of equipment or container of liquid:

    • (a) the information required under paragraphs (1)(a) and (d);

    • (b) the unique identification number that is on the label referred to in paragraph 29(4)(c);

    • (c) the civic address, function and technical description of the facility where the equipment or container of liquid is located or, if there is no civic address, its location using the owner’s site identification system;

    • (d) the progress on the plan’s implementation and the timelines for ending the use of the equipment;

    • (e) the measures taken to minimize or eliminate any harmful effect of the PCBs in the equipment on the environment and on human health; and

    • (f) the findings of the inspections of the equipment.

  • Marginal note:End of use of equipment — 2025

    (3) The owner of the equipment referred to in subparagraph 16(1)(b)(ii) and subsection 16(2) shall prepare a report that is current to December 31 of each calendar year in which the person owns the equipment and that contains the following information:

    • (a) the information required under paragraphs (1)(a) and (d);

    • (a.1) the civic addresses of the facilities where the equipment and liquids are located or, if there is no civic address, their location using the owner’s site identification system; and

    • (b) the quantity of liquids containing PCBs in the equipment, expressed in litres, the quantity of solids containing PCBs in the equipment, expressed in kilograms, and the concentration of PCBs in the liquids and the solids, expressed in mg/kg,

      • (i) that are stored on December 31 at the person’s PCB storage site,

      • (ii) that are sent, in that calendar year, to an authorized facility that is a transfer site,

      • (iii) that are sent, in that calendar year, to an authorized facility that is authorized to destroy them, or

      • (iv) that are destroyed in that calendar year.

  • Marginal note:End of use of equipment — 2025

    (4) The owner of the equipment referred to in subsection 16(2.1) shall prepare a report that is current to December 31 of each calendar year in which the person owns the equipment and that contains the following information:

    • (a) the information required under paragraphs (1)(a), (b) and (d); and

    • (b) for each piece of equipment, the quantity of liquids containing PCBs in the equipment, expressed in litres, the quantity of solids containing PCBs in the equipment, expressed in kilograms, and the concentration of PCBs in the liquids and the solids, expressed in mg/kg,

      • (i) that are in use on December 31,

      • (ii) that are stored on December 31 at the person’s PCB storage site,

      • (iii) that are sent, in that calendar year, to an authorized facility that is a transfer site,

      • (iv) that are sent, in that calendar year, to an authorized facility that is authorized to destroy them, or

      • (v) that are destroyed in that calendar year.

  • SOR/2010-57, s. 14
  • SOR/2014-75, s. 7

Date modified: