Off-Road Small Spark-Ignition Engine Emission Regulations
7 (1) The national emissions mark is the mark set out in the schedule.
(2) The national emissions mark shall be at least 7 mm in height and 10 mm in width.
(3) The national emissions mark shall be located
(a) on or immediately next to the engine information label referred to in paragraph 16(d); or
(b) if there is no such label applied to the engine, in a visible or readily accessible location.
(4) The national emissions mark shall be on a label that
(a) is permanently applied;
(b) is resistant to or protected against any weather condition; and
(c) bears inscriptions that are legible and indelible and that are indented, embossed or in a colour that contrasts with the background of the label.
(5) A company that has been authorized to apply the national emissions mark shall display the identification number assigned by the Minister in figures that are at least 2 mm in height, immediately below or to the right of the national emissions mark.
- Date modified: