CUSTOMS TARIFFUnited States Surtax Remission Order (2025)P.C.2025-46620254
16
Her Excellency the Governor General in Council, on the recommendation of the Minister of Finance, makes the annexed United States Surtax Remission Order (2025) under section 115a of the Customs Tariffb.S.C. 2005, c. 38, par. 145(2)(j)S.C. 1997, c. 36Remission — public health, public safety and national securitySubject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1), the United States Surtax Order (Steel and Aluminum 2025) or the United States Surtax Order (Motor Vehicles 2025) in respect of goods imported for use by any of the following entities for the purpose of health care, public health, public safety, national defence or national security:a government health research organization or clinical health research organization;an organization that produces or stores medical countermeasures, including pharmaceuticals or medical devices;the office of a public health official, as defined in subsection C.10.001(1) of the Food and Drug Regulations;an organization that provides ambulance or other emergency response services;a firefighting service;a law enforcement agency;a federal or provincial correctional service;the Department of National Defence;the Canadian Forces; orthe Canadian Security Intelligence Service.SOR/2025-210, s. 23Remission — health careSubject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1), the United States Surtax Order (Steel and Aluminum 2025) or the United States Surtax Order (Motor Vehicles 2025) in respect of goods importedfor use in the provision of medically necessary health care services, including services provided ata hospital,a health care or dental clinic,a medical, dental or diagnostic laboratory, ora long-term care facility; orfor use by any of the following entities for the purpose of health care or public health:an entity that provides products or services related to blood, cells, tissues or organs for medically necessary health care, ora federal, provincial, local or Indigenous health authority.SOR/2025-210, s. 24Remission — manufacture, processing, production or packagingSubject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of goods imported for use, in Canada, in the manufacture or processing of any good, in the production of any agricultural product or in the packaging of a food product or beverage.SOR/2025-210, s. 25Remission — United States Surtax Order (Steel and Aluminum 2025)Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (Steel and Aluminum 2025) in respect of goods importedfor use in the manufacture of motor vehicles or chassis for motor vehicles or in the manufacture of parts of or accessories for motor vehicles or chassis for motor vehicles; orfor use in aircraft, ground flying trainers or spacecraft or in parts of aircraft, ground flying trainers or spacecraft.SOR/2025-269, s. 1Remission — goods referred to in Schedule 1Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) in respect of the goods referred to in column 1 of Schedule 1 that are classified under a tariff classification number set out in column 2.SOR/2025-147, s. 8Remission — goods referred to in Schedules 2 and 3Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods referred to in column 2 of Schedule 2 or 3 that are classified under a tariff classification number set out in column 1.SOR/2025-147, s. 8Remission — goods referred to in Schedule 4Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods that are classified under a tariff classification number set out in column 2 of Schedule 4.SOR/2025-147, s. 8SOR/2025-210, s. 26Remission — goods referred to in Schedule 4.1Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods that are classified under a tariff classification number set out in column 2 of Schedule 4.1.SOR/2025-210, s. 26Remission — motor vehiclesSubject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (Motor Vehicles 2025) in respect ofmotor vehicles that are classified under a tariff classification number set out in Schedule 5;all-terrain vehicles, including utility terrain vehicles and side-by-side vehicles; andhearses and hearse limousines.SOR/2025-147, s. 8SOR/2025-210, s. 27ConditionsRemission is granted on the following conditions:in the case of a good in respect of which remission is granted under section 1 or 2, it is imported into Canada before July 1, 2026;in the case of a good that is referred to in Schedule 1 to the United States Surtax Order (Steel and Aluminum 2025) and in respect of which remission is granted under section 3, it is imported into Canada before July 1, 2026;in the case of a good that is referred to in Schedule 2 to the United States Surtax Order (Steel and Aluminum 2025) and in respect of which remission is granted under section 3, it is imported into Canada before February 1, 2026;in the case of a good in respect of which remission is granted under section 3.1, it is imported into Canada on or after February 1, 2026 and before July 1, 2026;in the case of a good referred to in Schedule 3, it is imported into Canada before the date specified in column 3 of that Schedule;in the case of a good that is classified under a tariff classification number set out in column 2 of Schedule 4,it is imported into Canada by a person whose business number is set out in column 1,it conforms to the description set out in column 3, if any,it is imported before September 1, 2025, andit is imported in accordance with the conditions set out in column 4, if any;in the case of a good that is classified under a tariff classification number set out in column 2 of Schedule 4.1,it is imported into Canada by a person whose business number is set out in column 1,it conforms to the description set out in column 3, if any,it is imported during the period specified in column 4, if any, andit is imported in accordance with the conditions set out in column 5, if any;no other claim for relief of the surtax has been granted under the Customs Tariff in respect of the good; andthe importer makes a claim for remission to the Minister of Public Safety and Emergency Preparedness within two years after the date of importation.SOR/2025-147, s. 9SOR/2025-210, s. 28SOR/2025-269, s. 2For greater certaintyFor greater certainty, there is no time limit that applies in respect of the importation of goods referred to in section 4.3 or in Schedule 1, 2 or 5.SOR/2025-269, s. 3Coming into forceThis Order comes into force on the day on which it is registered.(Section 4)
GoodsColumn 1Column 2ItemGoodsTariff Classification Number1Specialized infant formulas2202.99.39.102202.99.39.202Nutrition formulas, metabolic products, formulated liquid diet or human milk fortifiers1901.90.34.901902.19.11.001902.19.12.301902.19.12.901902.19.19.001902.30.11.001902.30.19.002106.90.35.002106.90.39.902106.90.95.902202.99.39.102202.99.39.203Medical compression garments6115.10.106115.10.916115.10.994Sterile barrier film or pouches for use in medical manufacturing3923.21.90.906305.39.00.005The following freezers and refrigerators:blood bank or plasma freezers;laboratory freezers;blood bank refrigerators;blood bank pass-thru refrigerators;laboratory refrigerators;pharmaceutical refrigerators;pharmaceutical or laboratory pass-thru refrigerators8418.69.906Inter-hospital transfer vans with fewer than 10 passengers8703.24.00.92
SOR/2025-147, s. 10SOR/2025-210, s. 29SOR/2026-16, s. 1(Section 4.1)
GoodsColumn 1Column 2ItemTariff Classification NumberGoods10404.10.10Instantized whey protein concentrate, with a minimum 80% protein on a dry basis;Instantized whey protein hydrolysate, with a minimum 80% protein on a dry basis and a level of hydrolysis of 1 to 4%;Whey protein concentrate 80%21006.20.00.10Long grain brown rice, husked for bulk processing in Canada31006.30.00.11Long grain rice, semi-milled or wholly milled, whether or not polished or glazed, parboiled3.11205.10.00.10Low erucic acid rape or colza seeds, for sowing3.22204.29Wine of fresh grapes, other than sparkling wine, including fortified wines, in containers holding more than 10 litres, for further processing in Canada42505.10.00Silica sand and quartz sands53502.20.00Instantized whey protein isolate with a minimum of 90% protein on a dry basis;Whey protein isolate 90%;Hydrolyzed whey protein concentrate 80%5.13918.90.90.90Linear low density polyethylene (LLDPE) grass in 200 foot long rolls, with a width of 26.75 inches5.23923.21.90Three-ply form-fit packaging, constructed entirely of linear low-density polyethylene, each ply with a thickness of 3.2 thousands of an inch, with a 2-inch fill port with membrane and cutter, and a 2-inch dispense port, with internal seal dimensions of a length of 45 inches, of a width of 45 inches, of a height of 47 inches63923.29.90Sacks and bags (including cones), of plastics73925.90.00Fibreglass bullet-resistant wall panels7.14011.70New pneumatic tires, of rubber, of a kind used on agricultural or forestry vehicles and machines84011.80.10New pneumatic tires, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines, for use with combination excavating and transporting scrapers of subheading 8429.30 or 8430.69, of a size of 36.00 inches × 51 inches or 40.00 inches × 57 inches94011.80.90New pneumatic tires, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines with rim diameters of 27 inches or more9.14011.90.10New pneumatic tires, of rubber, for use with appliances of subheading 8424.82, combination excavating and transporting scrapers of subheading 8429.30 or 8430.69, horticultural machinery for soil preparation and lawn or sports-ground rollers of heading 84.32, horticultural mowers (other than mowers for lawns, parks or sports-grounds) of heading 84.33 and of a size of 36.00 × 51 or 40.00 × 57104012.90.90Tire treads and tire flaps, of rubber114407.29.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of tropical wood: Cabreuva or Jatoba124407.91.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of oak (Quercus spp.): white oak or red oak134407.93.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of maple (Acer spp.)144407.94.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of cherry (Prunus spp.), in bundles of debarked and sliced, raw (no coating, unshaped) sawn lumber, with a length of 8 to 12 feet, with a width of 4 to 24 inches, with a moisture content of 50 to 80%, No. 2 or No. 3 common grade154407.95.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of ash (Fraxinus spp.), in bundles of debarked and sliced, raw (no coating, unshaped) sawn lumber, with a length of 8 to 12 feet, with a width of 4 to 24 inches, with a moisture content of 50 to 80%164407.99.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of hickory (Carya spp.) or black walnut (Juglans spp.)174408.10.00Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Of coniferous wood184408.39.00Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Of tropical wood: Other194408.90.00Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Other204409.29.90Wood continuously shaped along any of its edges, ends or faces, whether or not planed, sanded or end-jointed. Of shagbark hickory (Carya ovata) or mockernut hickory (Carya tomentosa), with straight grain and free of knots and defects: squares of a width of 1 inch, height of 1 inch and length of 18.5 inches or dowels of a diameter of 0.805 inches or 0.875 inches20.14411.94.00Compressed paperboard strips, with a thickness of 0.4375 inch, with a width of 2.5 inches, with a length of 96 inches, plain or coated with plastic214412.33.00Plywood sheets, of poplar (Populus spp.), of a thickness of 3/8 inch, of dimensions 4 feet × 8 feet, industrial grade, 4-ply, C-C finish224412.99.00High density wood fibre panels, certified to be formaldehyde-free, of a thickness of 2.3 mm, sandblasted on both sides, light in colour22.14819.10.00Cardboard containers, 8-ply, of interior dimensions of 42.5 inches length by 34.5 inches width, exterior dimensions of 46.5 inches length by 38.5 inches width by 42 inches height22.24819.20.00.90Paperboard crates, of pressed or formed laminated paperboard, of a thickness of at least 0.160 inch but not exceeding 0.200 inch, with a cross-section of 5.0 inches by 5.0 inches, of a length of at least 21 feet but not exceeding 23 feet234819.30.00.10Sacks and bags, having a base of a width of 40 cm or more, multiwall, of paper244819.40.00.20Other sacks and bags, including cones, multiwall, of paper255703.21.00Synthetic turf for sports applications for conversion into a modular system made in Canada, of straight fibres extruded and tapered (layer 1) and texturized fibres extruded then texturized, stretched and tapered (layer 2)266305.33.00Polywoven bags, of a kind used for the packing of goods, of polyethylene or polypropylene strip or the like26.17106.92.00.90Composite strip made of beryllium copper (C17200) with silver overlay277113.11.10.90Clasps, posts, cups, earring backs or posts with settings, of 14 carat or 10 carat sterling silver, for use in the manufacture of jewelry287113.19.10.90Rope chain or curb chain, of 14 carat or 10 carat gold, for use in the manufacture of jewelry28.17116.20.90Polycrystalline diamond compact (PDC) cutters and blanks28.27207.20.00.30Ductile iron bars, of cast iron, hot-rolled or rough turned, of grade 65-45-12 or 80-55-06, of specification ASTM A53628.217208.26.00Flat-rolled products of carbon steel, in coils, hot-rolled, pickled and oiled, of grade A506 4130 annealed, of a minimum spheroidization of 95%, with a width of 600 mm or more, of a thickness of at least 3.98 mm but not exceeding 4.20. mm;Flat-rolled products of carbon steel, in coils, hot-rolled, pickled and oiled, of grade WSS M1A365 A5, of a width of 600 mm or more, of a thickness of at least 3.54 mm but not exceeding 3.65 mm;Flat-rolled products of high-carbon steel, in coils, of grades 1050 or 1035, of specification SAE J403, of a thickness of 0.114 or 0.118 inch, of a width of at least 43.275 inches but not exceeding 51.375 inches, pickled, dry and spheroidize annealed28.227208.27.00Flat-rolled products of carbon steel, in coils, hot-rolled, pickled and oiled, of grade SAE J2340 490XF or 550XF, of a thickness of at least 1.06 mm but not exceeding 1.58 mm, of a width of 600 mm or more;Flat-rolled products of steel, hot-rolled, in coils, of specifications SAE J2340 340XF, 420XF, 490XF, 550XF, and ASTM A606 Type 4, of a thickness of at least 0.049 inch but not exceeding 0.108 inch, whether or not slit, with slit widths of at least 3.018 inches but not exceeding 35.700 inches, with full coil widths of at least 36.000 inches but not exceeding 54.375 inches28.237208.38.00.10Flat-rolled products of non-alloy steel, in coils, hot-rolled, of a specification ASTM A606 Type 4, of a thickness of at least 0.171 inch but not exceeding 0.184 inch, with a width of 48 inches, with a mill surface finish or an untreated surface finish28.37208.38.00.50Flat-rolled steel sheets, hot-rolled, of a length of 240 inches, of a width of 84 inches, with a thickness of 11GA, and grade of SAE J403GR101028.317208.39.00Flat-rolled products of carbon steel, in coils, hot-rolled, of grade SAE J403 1050, spheroidized annealed, of a thickness of at least 0.090 inch but not exceeding 0.097 inch, with a width of 48 inches, with a hot-rolled surface finish;Flat-rolled products of carbon steel, in coil, hot-rolled, of grade SAE J403 1037, of a thickness of at least 0.055 inches but not exceeding 0.071 inch, of full coil widths of at least 47.500 inches but not exceeding 48.375 inches, of slit widths of at least 6.75 inches but not exceeding 24.00 inches, with a hot-rolled surface finish28.327209.15.00Flat-rolled products of carbon steel, in coils, not further worked than cold-rolled (cold-reduced), annealed, of grade SAE J403 1018, with a minimum spheroidization of 95%, of a thickness of at least 4.24 mm but not exceeding 4.35 mm, with a width of 600 mm or more28.337209.16.00Flat-rolled products of carbon steel, in coils, not further worked than cold-rolled (cold reduced), of grade SAE J2340 550Y, JIS G3135 SPFC 590 or GMW 3032 M-ST-S 210B2, of a thickness of at least 1.00 mm but not exceeding 1.68 mm, of a width of 600 mm or more, uncoated;Flat-rolled products of carbon steel, in coils, not further worked than cold-rolled (cold reduced), of grade SAE J403 1050, fully annealed, with 95% minimum spheroidization, of a thickness of at least 2.54 mm but not exceeding 2.70 mm, with a width of 600 mm or more28.347209.16.00.40Flat-rolled products of iron or non-alloy steel, in coils, of specification SDI, of a width of 600 mm or more, of a thickness exceeding 1 mm but less than 3 mm28.47209.16.00.90Flat-rolled products of iron or non-alloy steel, of a width of at least 600 mm, cold-rolled not clad, plated or coated, in coils, not further worked than cold-rolled, with a thickness of at least 1 mm but not exceeding 3 mm, with zinc aluminum magnesium coating28.57209.17.00Flat-rolled products of carbon steel, in coils, not further worked than cold-rolled (cold reduced), of grade GMW 3032 M - ST-S 210B2 or GMW3032M-ST-S-CR180B2, of a thickness of at least 0.74 mm but not exceeding 1.00 mm, with a width of 600 mm or more;Flat-rolled products of non-alloy steel, in coils, cold-rolled (cold-reduced), of a specification SAE J2340 340XF, of a thickness of at least 0.019 inch but not exceeding 0.022 inches, with a slit width of 23.425 inches, with a full coil width of 48 inches, gauge range from 0.019 to 0.022 inch, with a pickled and oiled finish297209.18.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness of less than 0.5 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070307210.12.00Tinplate sheets of dimensions 28.5 inches × 28.875 inches, 30 inches × 30 inches or 34.875 inches × 34.875 inches, with a thickness of 0.0135 inches, coated with up to 0.25 pounds of tin on both sides, of specification ASTM A623 or A624 (Material T1, batch annealed)30.017210.30.00Flat-rolled products, in coils, sheets and plates of carbon steel, electro-galvanized, of grade WSS-M1A365-A14 CR4 60g/60g u/o Exposed, with a width of 600 mm or more;Flat-rolled products, in coils, of non-alloy steel, cold-rolled, electro-galvanized, of grade M-190, of specification ASTM A980, with a thickness of at least 0.028 inch but not exceeding 0.031 inch, with a width 50.5 inches, with a slit width of 9.95 inches, with a zinc coating ZN132, unpassivated and oiled finish;Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, with a width of 600 mm or more, hot-dipped, galvanized and chemically treated dry30.027210.49.00Flat-products, in coils, sheets and plates, of non-alloy steel, cold-rolled, galvanized, of grade ASTM A1008 J2329, with a width of 600 mm or more, of a thickness of at least 0.80 mm but not exceeding 0.91 mm;Flat-rolled products, in coils, of low-alloy steel, galvanized, of specification SAE J2340 550XF, of a thickness of at least 0.0374 inch but not exceeding 0.0413 inch, with a slit width of 21.8504 inches, with a full coil width of 44.100 inches, with a hot-dip galvanized coating, unpassivated and oiled;Flat-rolled products, in coils, of galvanized steel, of specification SAE J2340 250B, of a thickness of at least 0.044 inch but not exceeding 0.049 inch, with a slit width 8.431 inches, with a full coil width of 42.655 inches, with a hot-dip galvanized coating, unpassivated and oiled;Flat-rolled products, in coils, of galvanized low-alloy steel, of specification SAE J2340 550XF, of a thickness of at least 0.047 inch but not exceeding 0.049 inch, with a slit width of 35.19 inches, with a full coil width of 43.7 inches, with a hot-dip galvanized coating, unpassivated and oiled;Flat-rolled products, of steel strip in oscillated coils, galvanized, of a standard CSA C22.2 No. 56-17 Section 7.2.2, with a depth of 0.0170 inch or 0.0185 inch, with a width of 0.3560 inch or 0.0394 inch30.047210.49.00.70Flat-rolled products, of non-alloy steel, galvanized with zinc, not corrugated, with a thickness of at least 1.849 mm but not exceeding 2.052 mm, of a width of at least 662 mm but not exceeding 989 mm, with a zinc coating or a zinc phosphate conversion coating, with a surface finish;Flat-rolled products, of non-alloy steel, cold-rolled, not corrugated, of a thickness of at least 1.275 mm but not exceeding 1.326 mm, of a width of at least 1 073 mm but not exceeding 1 076 mm, electrogalvanized with zinc, with a zinc coating and surface finish30.17210.61.00Flat-rolled steel, in coils, of specification CSA G401-24, of a thickness of 1.6, 2.0 or 2.8 mm, of a width of 690 mm, 692 mm or 863 mm, with an aluminium and zinc coating of 1 ounce per square feet;Flat-rolled products, in coils, sheets or plates, of carbon steel, of grade ASTM A463 CQ T-125, with a width of 600 mm or more, plated or coated with aluminum-zinc alloys317210.69.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, plated or coated with aluminum, other than with aluminum-zinc alloys327210.70.00Flat-rolled products of iron or non-alloy steel, with a width of 600 mm or more, painted, varnished or coated with plastic337210.90.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated: PVC coated metal sheets that have all of the following characteristics:Grade: G90Specification: ASTM A653-23-CS, type BThickness/diameter: 24 gauge steelWidth: 96 inchesLength: 48 inchesCoating: 20 mil (0.5 mm) Duradek PVC film33.017211.14.00.90Flat-rolled products, of non-alloy steel, in coils, not further worked than hot-rolled, of grade SAE/AISI 1070 to 1075, SAE/AISI C1050 or SAE/AISI 4130, of a thickness of at least 4.75 mm but not exceeding 6.35 mm, uncoated but oiled33.027211.23.00Flat-rolled products of carbon steel, in coils, sheets, and plates, not further worked than cold-rolled (cold-reduced), annealed, of grade SAE J404 8620, annealed, of a thickness of at least 4.95 mm but not exceeding 5.06 mm, of a width of less than 600 mm33.17211.29.00Flat-rolled products of iron or non-alloy steel, cold-rolled, not clad, plated or coated, of a thickness not exceeding 0.0098 inch, of a width not exceeding 23.625 inches, of grade AISI 1045, 1050, 1055, 1067 to 1070 or 1075, of specification ASTM A682 or ASTM A684;Flat-rolled steel strips, cold-rolled and annealed, of high-carbon SAE 1095 spring steel, of a thickness of 0.9 mm, of a width of 500 mm;Flat-rolled products, of spring-steel strip, hardened and tempered, of grade SAE/AISI 1095, of a thickness of at least 0.2 mm but not exceeding 2.5 mm, uncoated but lightly oiled347212.10.00Tinplate coil of a length of 3 inches, 4.625 inches, 6.3125 inches, 11.3 inches or 16 inches, with a thickness of 0.0135 inches, coated with up to 0.25 pounds of tin on both sides, of specification ASTM A623 or A624 (Material T1, batch annealed)34.0017212.20.00Flat-rolled products, of coils, sheets or plates of carbon steel, of a thickness of at least 0.45 mm but not exceeding 4.00 mm, of a width of less than 600 mm, electrolytically plated or coated with zinc34.0027212.30.00.40Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, with a width of less than 600 mm34.0037212.40.00.21Flat-rolled products, of coils, sheets or plates, of carbon steel, of a width of less than 600 mm, plated or coated with zinc, electrolytically, and painted, varnished or coated with plastics34.0047212.40.00.90Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, of a width of less than 600 mm, hot-dipped, galvanized, polymer-laminated34.0057212.50.00Flat-rolled products, in coils, sheets or plates, of aluminized carbon steel, of grade ASTM A463 CQ T-125, of a width of less than 600 mm34.0067212.50.00.60Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, of a width of less than 600 mm34.0077213.99.00Bars and rods, of iron or non-alloy steel, in irregularly wound coils, hot-rolled, of special bar quality carbon steel, of grade AISI 1536M, of a diameter of at least 0.8125 inch but not exceeding 1.1250 inches, of a length not exceeding 65 inches34.017214.91.00Continuous cast iron bars, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling, of grade 65-45-12, 65-40-18, or 60-55-06, with rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches and a length of at least 2 inches but not exceeding to 40 inches34.027214.99.00Continuous cast iron bars of grade 65-45-12, 65-40-18, 60-55-06, with a circular cross-sectional diameter of at least 0.5 inch up but not exceeding 20 inches, with a rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches, a length of at least 2 inches but not exceeding to 40 inches;Special quality bars and rods of non-alloy steel, not further worked than forge, hot-rolled, of a diameter of at least 1 inch but not exceeding 10 inches, of grade 1018, 1020, 1022, 1040, 1045, 1055, ASTM105, ASTM108, ASTM350, ASTM36, or SA105 (VAR- vacuum degassed)34.0217214.99.00.41Round steel bars, hot rolled, of grades 55 and 105, of a diameter of at least 0.50 inch but not exceeding 3.00 inches, uncoated34.0227215.10.00Other bars, of iron or non-alloy steel, not further worked than cold-formed or cold-finished, including ground, turned or polished, of grade 1018, without coating or plating34.0237215.10.00.20Other round steel bars, not further worked than cold-formed or cold-finished, of grade C1018, of specification ASTM A108, of an outside diameter of at least 0.625 inch but not exceeding 5.750 inches34.037215.10.00.90Bars and rods of free cutting steel, cold formed, of a diameter of 1.46 inches, of grade B 1018;Bars and rods of free cutting steel, cold formed, of a diameter of 1.312 inches, of grade 10B21;Bars and rods of free cutting steel, cold formed, of a diameter of 1 inch, of grade SAPH P and 1022;Bars and rods of free cutting steel, cold formed, of a diameter of 1.078 inches, of grade 102234.047215.50.00Bars and rods of cast iron, continuous, not further worked than cold-formed or cold-finished, of grade 65-45-12, 65-40-18 or 60-55-06, with a circular cross-sectional diameter of at least 0.5 inch but not exceeding 20.0 inches or with a rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches and a length of at least 2 inches but not exceeding to 40 inches;Bars, cold-rolled, of grade C1018 or C1045, of a thickness of at least 0.75 inch but not exceeding 4 inches, of a length of 20 feet;Bars, cold-rolled of grade C1045, of yield of 90 ksi, of a thickness of 2.125 inches, of a length of 20 feet;Other bars, of iron or non-alloy steel, not further worked than cold-finished, including ground, turned or polished, of grade 1018, without coating or plating34.0417215.50.00.29Steel round bars, not further worked than cold-formed or cold-finished, quenched and tempered, of grade 1045, with an outer diameter of 1.50 inches or 1.75 inches, of a length of at least 12 feet but not exceeding 21 feet34.057215.90.00Other bars and rods of iron or non-alloy steel34.067216.32.00I sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more34.077216.33.00H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more34.087219.11.00Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness exceeding 10 mm, of a width of 600 mm or more34.097219.12.00Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness of at least 4.75 mm but not exceeding 10.00 mm, of a width of 600 mm or more34.17219.13.00Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness of at least 3.00 mm but not exceeding 4.75 mm, of a width of 600 mm or more34.117219.14.00Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness of less than 3 mm, of a width of 600 mm or more34.127219.21.00Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 10 mm, of a width of 36 inches, 48 inches, 60 inches, or 72 inches, of a length of at least 60 inches but not exceeding 400 inches34.1217219.21.00.10Flat-rolled products of stainless steel, not in coils, not further worked than hot-rolled, of a thickness exceeding 10 mm, of a width of 600 mm or more but not exceeding 1 830 mm34.137219.22.00Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 4.75 mm but not exceeding 10 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches34.147219.23.00Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 3 mm but not exceeding 4.75 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches34.157219.24.00Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of less than 3 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches34.167219.31.00Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of a thickness of 4.75 mm or more, of a width of 600 mm or more34.177219.32.00Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of a thickness of at least 3.00 mm but not exceeding 4.75 mm, of a width of 600 mm or more34.187219.33.00Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm34.197219.34.00Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm34.27219.35.00Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness of less than 0.5 mm34.2017219.90.00Flat-rolled products of stainless steel, in coils, sheets or plates, of grades 304/304L, 316/316L, 409, 409Ni, 430, 436/436L or 439, of specification ASTM A240, of a width of 600 mm or more34.217220.11.00Flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than hot-rolled, of a thickness of 4.75 mm or more34.2117220.12.00Flat-rolled products of stainless steel, not further worked than hot-rolled, of a thickness of less than 4.75 mm, of a width of less than 600 mm34.2127220.20.00Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of a width of less than 600 mm34.237220.90.00Flat-rolled products of stainless steel, of a width of less than 600 mm, other34.247221.00.00Bars and rods, of stainless steel, hot-rolled, in irregularly wound coils34.257222.11.00Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section34.2517222.19.00Other bars and rods, in angles, shapes and sections including hexagonal sections, of stainless steel, not further worked than hot-rolled, of grades 420, 440, 17-4 and 15-534.267222.20.00Bars and rods of stainless steel, not further worked than cold-formed or cold-finished34.277222.30.00Bars and rods of stainless steel, other34.287222.40.00Angles, shapes and sections of stainless steel34.297223.00.00Wire of stainless steel, hot-rolled, of grades 304, 304L, 304M, 310S, 316 and 316L, of specifications ASTM A555 and ASTM A580, of a diameter of at least 0.2165 inch but not exceeding 1.3750 inches, annealed and pickled357225.11.00Silicon-electrical steel, grain-oriented, of a width of 600 mm or more367225.19.00Flat-rolled products of silicon-electrical steel, of a width of 600 mm or more, other than grain-oriented36.17225.30.00Flat-rolled products of other alloy steel, in coils, hot-rolled, pickled and oiled of grade 420XF (modified), according to specification WSS M1A365 A5, with a width of 600 mm or more, of a thickness of at least 3.54 mm but not exceeding 3.65 mm;Flat-rolled products of other alloy steel, in coils, hot-rolled, pickled and oiled of grade 550XF, of specification SAE J2340, with a width of 600 mm or more, of a thickness of at least 1.42 mm but not exceeding 1.58 mm;Flat-rolled products of other alloy steel, in coils not further worked than hot-rolled of grade 4130, with a width of 600 mm or more, of a thickness of at least 3.98 mm but not exceeding 4.20 mm, pickled and oiled, annealed;Flat-rolled products of other alloy steel, in coils, hot-rolled, pickled and oiled of grade 490XF, of specification SAE J2340, with a width of 600 mm or more, of a thickness of at least 1.06 mm but not exceeding 1.27 mm;Flat-rolled products of alloy steel, in coils, hot-rolled, pickled and oiled, of grade SAE J2340 490XF, of specification SAE J2340, with a width of 600 mm or more, of a thickness of at least 1.49 mm but not exceeding 1.71 mm;Flat-rolled products of other alloy steel, in coils, not further worked than hot-rolled, of grade 550X, 420XF or 340XF, of specification SAE J2340, of a minimum thickness of at least 0.055 inch but not exceeding 0.059 inch, of a width of at least 44.00 inches but not exceeding 53.46 inches36.27225.40.00Flat-rolled products of other alloy steel, in sheets and plates, hot-rolled, pickled and oiled of grade 420XF (modified) according to specification WSS M1A365 A5, with a width of 600 mm or more, of a thickness of at least .54 mm but not exceeding 3.65 mm;Flat-rolled products of other alloy steel, in sheets and plates, hot-rolled, pickled and oiled of grade JIS G3113 SAPH 440, with a width of 600 mm or more, of a thickness of at least 2.26 mm but not exceeding 2.30 mm; Flat-rolled products of other alloy steel, in sheets and plates, hot-rolled, pickled and oiled of grade SAE J2340 340XF, with a width of 600 mm or more, of a thickness of at least 1.49 mm but not exceeding 1.66 mm;Flat-rolled products of other alloy steel, in sheets and plates, hot-rolled, pickled and oiled of grade 550XF, of specification SAE J2340, with a width of 600 mm or more, of a thickness of at least 1.70 mm but not exceeding 1.91 mm;Flat-rolled products of other alloy steel, in sheets and plates, hot-rolled, pickled and oiled of grade 490XF, of specification SAE J2340, with a width of 600 mm or more, of a thickness of at least 1.49 mm but not exceeding 1.71 mm;Flat-rolled products of other alloy steel, not further worked than hot-rolled, of grades 4140, 1018, 1020, 1045, A2, D2, H13, L6, O1, P20, S7, M2, M7, M42, 4340, 8620 or 6150, with a width of 600 mm or more36.37225.50.00Flat-rolled products of other alloy steel, in coils, not further worked than cold-rolled (cold-reduced), of grade SAE J2340 490XF, with a width of 49.193 inches, 52.470 inches or 56.720 inches, with a thickness of at least 0.022 inch;Flat-rolled products of other alloy steel, in coils, cold-rolled, of a width of 600 mm or more, dual phase, uncoated36.47225.50.00.30Flat-rolled coils, sheets and plates of carbon steel, cold-rolled (cold-reduced), of grade JIS G3135 SPFC 590, of a width of 600 mm or more, of a thickness of at least 1.52 mm but not exceeding 1.68 mm;Flat-rolled coils, sheets and plates of alloy steel, cold-rolled (cold-reduced), of grade SAE J2340 550Y, with a width of 600 mm or more, of a thickness of at least 1.19 mm but not exceeding 1.30 mm36.57225.50.00.40Flat-rolled coils, sheets and plates of alloy steel, cold-rolled (cold-reduced), of grade 4130, with a width of 600 mm or more, of a thickness of at least 3.27 mm but not exceeding 3.38 mm, annealed36.67225.91.00Flat-rolled coils, sheets and plates of alloy steel, with a width of 600 mm or more, of a thickness of at least 0.45 mm but not exceeding 4.00 mm, electrolytically plated or coated with zinc36.77225.99.00Flat-rolled coils, sheets and plates of alloy steel, of grade ASTM A463 CQ T-125, with a width of 600 mm or more, plated or coated with aluminum or aluminum alloys377226.11.00Silicon-electrical steel, grain-oriented, of a width of less than 600 mm387226.19.00Silicon-electrical steel, non-oriented, of a width of less than 600 mm38.0017226.20.00Flat-rolled products, of other alloy steel, of grades M2, M7, M42, 8620 or 6150, with a width of less than 600 mm38.0027226.92.00Flat-rolled products of other alloy steel, in coils, sheets and plates, not further worked than cold-rolled (cold-reduced), of grade 8620, of specification SAE J404, with a width of less than 600 mm, of a thickness of at least 4.95 mm but not exceeding 5.06 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J403 1050 SA, of a thickness of at least 3.41 mm but not exceeding 3.49 mm, annealed, of a width of:at least 83.80 mm but not exceeding 84.05 mm,at least 99.75 mm but not exceeding 100.00 mm, orat least 153.80 mm but not exceeding 154.22 mm;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J403 1050 CR SA, annealed, of a thickness of at least 3.00 mm but not exceeding 3.10 mm, with a width of:at least 33.80 mm but not exceeding 34.05 mm,at least 38.10 mm but not exceeding 38.35 mm, orat least 41.80 mm but not exceeding 42.05 mm;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade SAE J403 1050 /55CR SA, of a thickness of at least 3.12 mm but not exceeding 3.22 mm, of a width of at least 47.75 mm but not exceeding 48.00 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced) of grade SAE J403 1050 SA, of a thickness of at least 2.95 mm but not exceeding 3.05 mm, of a width of at least 139.50 mm but not exceeding 139.75 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J404 4130 CR, of specification SAE, of a thickness of at least 2.95 mm but not exceeding 6.00 mm, with a width of at least 100.75 mm but not exceeding 186.50 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade SAE J404 4130, of a thickness of at least 4.92 mm but not exceeding 5.00 mm, of a width of at least 97.75 mm but not exceeding 98.00 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J404 4130, of a thickness of at least 2.90 mm but not exceeding 3.02 mm, annealed of a width of at least:at least 75.75 mm but not exceeding 97.00 mm, orat least 245.75 mm but not exceeding 246.00 mm;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade SAE J403 1050 SA, of a thickness of at least 3.93 mm but not exceeding 4.07 mm, of a width of at least 149.50 mm but not exceeding 149.75 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J403 6150 SA, of a thickness of at least 3.45 mm but not exceeding 3.55 mm, of a width of at least 103.49 mm but not exceeding 103.74 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade SAE J404 4130, of a thickness of at least 4.92 mm but not exceeding 5.08 mm, of a width of at least 97.75 mm but not exceeding 98.00 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold reduced), of grade SAE J404 4130, of a thickness of at least 6.23 mm but not exceeding 6.43 mm, of a width of at least 137.75 mm but not exceeding 138.00 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold reduced), of grade SAE J404 4130, of a thickness of at least 6.9 mm but not exceeding 7.1 mm, of a width of at least 96.75 mm but not exceeding 97.00 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade ASTM A109 C1020, of a thickness of at least 1.9 mm but not exceeding 2.0 mm, of a width of at least 33.800 mm but not exceeding 34.025 mm;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade SAE J403 1008 CR, of a thickness of at least 1.90 mm but not exceeding 1.98 mm, of a width of at least 201.75 mm but not exceeding 202.00 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J403 1050 SA, of a thickness of at least 3.41 mm but not exceeding 3.49 mm, of a width of at least 83.80 mm but not exceeding 84.05 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold reduced), of grade J403 1050 SA, of a thickness of at least 3.41 mm but not exceeding 3.49 mm, of a width of at least 99.75 mm but not exceeding 100.00 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade ASTM A506 4130, of a thickness of at least 6.05 mm but not exceeding 6.25 mm, of a width of at least 83.8 mm but not exceeding 84.0 mm, annealed;Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J403 1018 J403 SP, of a thickness of at least 3.91 mm but not exceeding 4.04 mm, of a width of at least 62.75 mm but not exceeding 63.00 mm, annealed;Flat‐rolled products of other alloy steel, not further worked than cold‐rolled (cold reduced), of grade SAE J404 4130 CR, of a thickness of at least 2.45 mm but not exceeding 2.57 mm, of a width of at least 75.75 mm but not exceeding 76.00 mm, annealed38.0027226.99.00Flat-rolled coils, sheets and plates of carbon steel, with a width of less than 600 mm, of a thickness of at least 0.45 mm but not exceeding 4.00 mm, electrolytically plated or coated with zinc;Flat-rolled coils, sheets and plates of aluminized alloy steel, of grade ASTM A463 CQ T-125, with a width of less than 600 mm, plated or coated with aluminum or aluminum alloys38.017227.10.00Bars and rods, of special bar quality, of other alloy steel (other than stainless steel), hot-rolled, in irregularly wound coils, with a diameter of at least 1 inch but not exceeding 10 inches, drawn or extruded of grades ASTM588, ASTM350 or SA350 (VAR- vaccum degassed)38.0117227.90.00.83Bars and rods of other alloy steel, of special bar quality alloy steel, hot rolled, in irregularly wound coils, of grades AISI 3130M, 4120M, 4320M or 4330M, of a diameter of 0.8125 inches but not exceeding 1.1250 inches, of a length of up to 65 inches38.027228.30.00Other bars and rods of other alloy steel, not further worked than hot-rolled, hot drawn or extruded, of grade 4130, of specification AISI 4130 or ASTM A29;Other bars and rods of other alloy steel, not further worked than hot-rolled, hot drawn or extruded, of grade 4140, of specification ASTM A29, ASTM A322, ASTM A304, ASTM A108 or UNS.G41400;Other bars and rods of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 4150, of specification ASTM A29, ASTM A322, ASTM A304, ASTM A108, AISI 4150 or UNS G41500;Other bars and rods of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 9310, of specification ASTM A29, ASTM A322, ASTM A304, ASTM A108 or AISI 9310;Other bars and rods of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade C1045, of a diameter of 1.5 inches, 2 inches, 3 inches or 3.5 inches, with a length of 20 feet;Other bars and rods of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade C1045, of specification ASTM A108 SRA, with a diameter of 0.75 inches, with a length of 20 feet;Other bars and rods of other alloy steel, not further worked than hot-rolled or hot-drawn, of grade 4140, of a diameter of 4.75 inches, of a length of 20 feet;Other bars and rods, of special quality other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 3125, 4130, 4130H, 4140, 4140AQ, 4140H, 4145, 4145H, 4340, 8620, 8620H, 8625, 8630, 8637, 8640 or 8735, of type AMS 6415 and AMS 2301, of a diameter of at least 1 inch but not exceeding 10 inches, vacuum degassed38.0217228.30.00.71Round bars, hot-rolled of other alloy steel, supplied in heat-treated and quenched-and-tempered conditions, of grade 4140 of a diameter of at least 0.5 inch but not exceeding 3.0 inches, uncoated, oiled38.0227228.30.00.72Bars and rods of other alloy steel, of special bar quality, hot-rolled, of a diameter of at least 92.075 mm but not exceeding 152.000 mm, with a length of 7 772 mm38.037228.40.00.90Alloy steel forged bars and rods, vacuum degassed, annealed or quenched and tempered, or normalized and tempered, of grade AISI4130, 4140,4340, or 8620, of specifications ASTM A29, ASTM A322, ASTM A304 or ASTM A108, with a circular cross-sectional diameter of less than 8 inches or a rectangular cross-sectional thickness of less than 4 inches38.047228.50.00Steel bar, of grade Aerospace M50 NIL VIM/VAR, Aerospace 52100 VIM/VAR, Aerospace 440C VAR or Aerospace 4340 VAR, of technical specifications AMS 6278, AMS 6491, AMS 6490, AMS 5618, AMS 6440, AMS 6444, AMS 6414 or AMS 6415, of specifications GE -B50TF347, PWA36140, EMS52526, B50TF346, P29TF48, CPW54, CPW378, MSRR6083, EMS83060, EMS52491, CAFM/L-01-119, DMD0119.20, EMS52494 ,PWA723, CPW52, EMS52493, EMS56627 or EMS83060, of a thickness of at least 0.5 inch but not exceeding 12 inches, with a length of 14 feet;Bars and rods, of alloy steel other than stainless steel, maraging steel 250M & 300M, not further worked than cold-formed or cold-finished, of grade H13, modified 4340, or 4330, with a circular cross-sectional diameter of at least 1 inch but not exceeding 10 inches or with minimum dimensions of 10 inches height, 20 inches width and 16 inches length and maximum dimensions of 14 inches height, 28 inches width and 40 inches length for rectangular bars38.057228.50.00.90Alloy steel bars and rods, cold formed or cold finish, of grade 4130, 4140, 4150, 4320, 4330, 4340, 52100, 8620 or 9310; vacuum degassed, annealed or quenched and tempered, or normalized and tempered, of specifications ASTM A29, ASTM A322, ASTM A304, ASTM A108, with a circular cross-sectional diameter not exceeding 8 inches or a rectangular cross-sectional thickness not exceeding 4 inches;Round bars of uncoated alloy steel, of grade 4140, with an annealed cold finish, with a diameter of 1 inch, with a length of 144 inches;Round bars of other alloy steel, not further worked than cold-formed or cold-finished, of grade 8620, of specification ASTM A108, of diameters of 0.6875 inch, 0.8750 inch or 1.0625 inches, including 0.030-inch undercut variants, of a length of at least 24 feet but not exceeding 36 feet38.067228.60.00Bars or rods, of alloy steel, hot rolled or rough turned, vacuum degassed, annealed or quenches and tempered, or normalized and temperedof grade 4130, other specification ASTM A20, with a circular cross-sectional diameter of less than 8 inches or a rectangular cross-sectional thickness of less than 4 inches;of grade AISI 4130, 4140, or 4150, of specifications ASTM A29, ASTM 322, ASTM A304, or ASTM A10838.0617301.10.00Steel sheet piling, hot-rolled, of a Z-profile section designated PZC 26, with a height of 450 mm, with a length of 708 mm, with a thickness of at least 13.3 mm but not exceeding 15.2 mm, with an untreated surface38.0627302.10.00.12Steel rail joints, head-hardened, insulated and pre-bonded, of specification AREMA Manual for Railway Engineering, Chapter 4 – Part 3 – Section 3.8 for bonded insulated joints, of a length of 20 feet, of a weight of 115, 132, or 136 pounds per yard, insulated with aramid-fabric insulation and including a 0.19-inch fiberglass end post38.0637302.30.90Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails. Switch blades, crossing frogs, point rods and other crossing pieces - Other38.0647302.40.00Railroad cut spike tie plates, of specification AREMA Manual for Railway Engineering, Chapter 5 Track, Section 1 Tie Plates, of a length of at least 14 inches but not exceeding 18 inches, with a width of 8 inches38.0657302.90.00Railroad clips and fasteners of steel, of specification AREMA Manual for Railway Engineering, Chapter 30 Ties and Fasteners, 1.7 Fasteners, type E-2055, with an outer diameter of 20 mm, with a length of 106 mm, with a width of 101.5 mm;Railroad track and shimming spikes of carbon steel, of specification AREMA Manual for Railway Engineering, Chapter 5 Track, Section 2 Track Spikes, with a reinforced throat of 0.625 inches, with a width of 0.625 inches, and a length of 6 inches;Track-circuit connector fasteners of carbon steel, with a length of 3 inches, with a width of 3 inches, with a height of 2 inches38.077304.19.00Hydraulic line tube, of carbon steel, grade C1026, pressure rated at 3000 PSI, with 1.25 inch outer diameter by 0.120 inch wall thickness, of a length of 72 inches, zinc-plated38.0717304.31.00Tubes, pipes and hollow profiles, seamless of non-alloy steel, cold-drawn, of grade 1026, of an outer diameter of at least 0.875 inch but not exceeding 5.250 inches, of an inner diameter of at least 0.50 inch but not exceeding 3.75 inches38.0727304.59.00Tubes, pipes and hollow profiles, seamless, of circular cross-section, of other alloy steel, other38.087304.90.00Hydraulic line tube, carbon steel grade C1026, pressure rated at 3000 PSI, with outer diameter 1-1/4 inches and wall thickness 0.120 inch, available in lengths of 24 inches, 30 inches ,60 inches, 90 inches, and 120 inches, ends fitted with male-male JIC connections, size 1-5/16 inch (thread outside diameter), zinc plated38.0817305.31.00.11Other standard pipes, of iron or non-alloy steel, of grade 42, of specification ASTM A572, with a wall thickness of 25.4 mm, with an outer diameter of 2642.0 mm, with backing rings and grouting ports, with a polyurethane lining and coating38.0827306.29.00Coiled tubing of carbon or low-alloy steel, of specification API 5ST , of a yield strength of at least 70 000 psi but not exceeding 140 000 psi, of an outside diameter of at least 19.05 mm but not exceeding 88.90 mm, of a wall thickness of 2.03 mm but not exceeding 7.62 mm, of a length of at least 1 000 m but not exceeding 15 000 m38.097306.29.00.49Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter not exceeding 60.2 mm38.17306.29.00.59Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter of 60.3 mm38.117306.29.00.69Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter exceeding 60.3 mm but not exceeding 73 mm38.127306.29.00.79Tubing of iron or steel, of a kind used in drilling for oil or gas of an external diameter exceeding 73 mm38.137306.30.00In-line galvanized steel tubes, of high strength yield and customized tensile properties, with a thickness of at least 0.71 mm but not exceeding 4.57 mm, of specification ASTM A-1057;Steel tubes, of low carbon, in coils, of specifications SAE J526, GMW17334, GMW3059, and GM124M, with a wall thickness of 0.70 mm, 0.79 mm or 0.89 mm, with an outer diameter of 9.52 mm, 12.70 mm, 15.88 mm or 19.05 mm, with a zinc–aluminum coating and an epoxy coating38.147306.30.00.41Tubes of carbon steel, drawn over mandrel, of grade 1026, of specifications ASTM A513, ASTM A106 or ASTM A519;Welded circular hollow structural sections, of iron or non-alloy steel, of grade 350W or A500C, of specification ASTM A53 or CSA G40.21, with a wall thickness of 4.8 mm, with an outer diameter of 60.3 mm, with a length of at least 2 m but not exceeding 6 m, uncoated38.157306.30.00.49Tubes of carbon steel, drawn over mandrel, of grade 1026, of specifications ASTM A513, ASTM A106 or ASTM A519;Steel tubes, drawn over mandrel, of specification ASTM A513, of grade 4130, of an outside diameter of 1.25 inches with a wall thickness of 0.250 inch or of an outside diameter of 3.0 inches with a wall thickness of 0.312 inch;Steel tubes, drawn over mandrel, of grade 4130, of specification A513, with the following dimensions:1.375 inches of diameter by 0.188 inch of wall thickness,1.625 inches of diameter by 0.25 inch of wall thickness,1.76 inches of diameter by 0.193 inch of wall thickness,2.0 inches of diameter by 0.188 inch of wall thickness,2.0 inches of diameter by 0.25 inch of wall thickness,2.125 inches of diameter by 0.188 of wall thickness,2.25 inches of diameter by 0.188 inch of wall thickness,2.25 inches of diameter by 0.25 inch of wall thickness,2.375 inches of diameter by 0.2 inch of wall thickness,2.625 inches of diameter by 0.25 inch of wall thickness,2.75 inches of diameter by 0.187 inch of wall thickness,3 inches of diameter by 0.25 inch of wall thickness,3 inches of diameter by 0.285 inch of wall thickness,3.25 inches of diameter by 0.375 inch of wall thickness,3.375 inches of diameter by 0.281 inch of wall thickness,3.625 inches of diameter by 0.281 inch of wall thickness,3.875 inches of diameter by 0.313 inch of wall thickness;Tubes of low-carbon steel, in coils, of a specification SAE J526, with a wall thickness of 1.25 mm or 0.89 mm, with an outer diameter of 9.52 mm or 12.70 mm, with a zinc–aluminum coating and an epoxy coating38.167306.30.00.51Round steel tubes, of an outside diameter of at least 1.0 inch but not exceeding 4.5 inches, with a coating of G120 hot-dipped galvanized zinc base coat, conversion coating and clear finish coating, with a wall thickness of at least 0.138 inch but not exceeding 0.153 inch38.177306.30.00.59Other tubes, of iron or non-alloy steel, drawn over mandrel, of grade 1026 and ST52.3, of specification ASTM A513 Type 5, of an outer diameter of at least 2.50 inches but not exceeding 5.25 inches, of an inner diameter of at least 1.25 inches but not exceeding 3.75 inches397306.30.00.89Other tubes, pipes and hollow profiles of iron or steel, welded, of circular cross-section, of iron or non-alloy steel, that have all of the following characteristics:Grade: 1008, 1010, 1015 or 1020Yield/tensile strength: 40 000 psi yield / 45 000 psi tensile, 45 000 psi yield / 48 000 psi tensile or 50 000 psi yield / 55 000 psi tensileSpecification: ASTM A500 or A513Diameter: 0.5 to 5 inchesCoating: in-line galvanizing process utilizing a triple layer of protection (first, a 99.99% pure SHG zinc coating is applied to the surface, followed by a conversion coating and a clear organic topcoat that seals the surface and produces a smooth, shiny finished product)Steel tubes, honed, of specification ASTM 513 Type 5, of an outside diameter of at least 1.875 inches but not exceeding 2.375 inches and an inside diameter of at least 1.500 inches but not exceeding 2.003 inches, with a minimum yield strength of 75 ksi;Steel tubes, drawn over mandrel, of specification ASTM 513 Type 5, of an outside diameter of at least 2.375 inches but not exceeding 2.625 inches and an inside diameter of at least 1.984 inches but not exceeding 2.241, with a minimum yield strength of 75 ksi39.017306.40.00Tubes, of stainless steel, welded, of circular cross-section, of grade 304/304L or 316/316L, of specification ASTM A270, with an outside diameter not exceeding 25.3 mm, with a wall thickness of less than 1.65 mm;Tube assemblies, of stainless steel, incorporating bends, of grade 304L, of specification ASTM 269, with a wall thickness of 1.24 mm, with an outside diameter of 12.70 mm, and including at least one end of:brazed blocks of grade 304SS and specification ASTM A314, or0.75 inch-16 Unified National Fine (UNF) fittings, of grade EN1A low-carbon mild steel, of specification BS 970, with Zn/Ni plating of the standard ASTM B84139.027306.40.00.20Other tubes, of stainless steel, welded, of circular cross-section, of grade 304/304L or 316/316L, of specification ASTM A270, of an outside diameter of at least 25.3 mm but not exceeding 114.9 mm39.037306.40.00.30Other tubes, of stainless steel, welded, of circular cross-section, of grade 304/304L or 316/316L, of specification ASTM A270, with an outside diameter exceeding 114.9 mm39.047306.50.00Tube assemblies, of low-carbon mild steel, of specification SAE J526, with a wall thickness of 1.24 mm, with an outer diameter of 12.7 mm, with a Zn/Al and epoxy coating on the tube, and including on one end a 0.75 inch-16 Unified National Fine (UNF) steel fitting, held in place by a tube endform39.17306.61.00Galvanized steel tubes, of square or rectangular cross section, of high yield strength and customized tensile properties, thickness of at least 0.89 mm but not exceeding 4.57 mm, with triple layer galvanized paint coating on the inside, an interior zinc paint coating, and an exterior hot-dip galvanized coating, of specification ASTM A-1057407306.61.00.39Other tubes, pipes and hollow profiles of iron or steel, welded, of square or rectangular cross-section, that have all of the following characteristics:Grade: 1008, 1010, 1015 or 1020Yield/tensile strength: 40 000 psi yield / 45 000 psi tensile, 45 000 psi yield / 48 000 psi tensile or 50 000 psi yield / 55 000 psi tensileSpecification: ASTM A500 or A513Thickness: 0.625 to 4.000 inches (12 and 14 gauge)Coating: in-line galvanizing process utilizing a triple layer of protection (first, a 99.99% pure SHG zinc coating is applied to the surface, followed by a conversion coating and a clear organic topcoat that seals the surface and produces a smooth, shiny finished product);Other tubes, pipes and hollow profiles of iron or steel, welded, of square cross-section, that have all of the following characteristics:Grade: 50 or betterSpecification: ASTM A1011Dimensions: 1.5 inches × 1.5 inches, 1.75 inches × 1.75 inches, 2.00 inches × 2.00 inches, 2.25 inches × 2.25 inches or 2.5 inches × 2.5 inchesCoating: galvanizing that meets ASTM A653;Hollow structural sections, of iron or non-alloy steel, of grade 350W or A500C, of specification ASTM A53 or CSA G40.21, with a width of 63.5 mm, with a wall thickness of 3.18 mm, 4.78 mm or 6.35 mm, with a height of 63.5 mm, with a length of at least 2 m but not exceeding 6 m, uncoated;Hollow structural sections, of iron or non-alloy steel, of grade 350W or A500C, of specification ASTM A53 or CSA G40.21, with a width of 76.2 mm, with a wall thickness of 4.78 mm, with a height of 76.2 mm, with a length of at least 2 m and 6 m, uncoated40.017306.61.00.49Other tubes, pipes and hollow profiles, welded, of square or rectangular cross-section, that have all of the following characteristics:Grade: 316 or 316LSpecification: ASTM 554Dimensions: of an external periphery not exceeding 812.8 mm, with a height of 50.8 mm, 101.6 mm, 152.4 mm, 154.4 mm or 203.2 mm, with a width of 50.8 mm, 101.6 mm, 152.4 mm, 203.2 mm, 254 mm or 304.8 mm, with a thickness of 6.35 mm, 9.53 mm, 12.7 mm or 15.88 mm40.17307.21.00Welded stainless steel fasteners (“weld studs”), cold-forged, threaded or unthreaded, tapped, flanged or unflanged, of a diameter of at least 2 mm but not exceeding 10 mm40.117307.29.00Stainless steel mechanical adapter, conforming to the standard ASME B31.3, with a 1.00-inch female precision-machined bayonet connection on one end and a 0.50-inch male precision-machined bayonet connection on the other, including clamp and O-ring40.127307.29.99.00Pipe fittings of tee shape, of stainless steel, of grade 316L, of specification ASTM F1545, with a 6-inch nominal diameter, with a length of at least 1 foot but not exceeding 10 feet, with forged lap-joint flanges, with a polytetrafluoroethylene lining40.27307.91.00Welded mild steel fasteners (“weld studs”), cold-forged, threaded or unthreaded, tapped, flanged or unflanged, of a diameter of at least 2 mm but not exceeding 10 mm417307.92.00Threaded elbows, bends and sleeves, of specification API 5CT427307.99.00Other tube or pipe fittings of iron or steel437308.10.00Bridges and bridge-sections, of iron or steel43.17308.30.00.28Motor-operated (gear head) rolling industrial galvanized steel service door, of specification ASTM 653, with coating of galvanized zinc or zinc-iron alloy (galvannealed) by hot-dip process, with slat and hood finish43.117308.40.00Steel overhang work platform attachment for trucks, with a 16-foot work platform43.127308.90.00Adapters for crossing gates, of steel, safety sensitive, with an assembled length of 32 inches, with an assembled width of 12 inches, with an assembled height of 7 inches;Glare screen systems, of 25-gauge steel sheet of grades AISI 1008 or 1010, hot-dip galvanized to ASTM A653 with a G90 coating and powder-coated, supplied with 0.75-inch attachment hardware, concrete expansion anchors, and splice plates of 4140/42 steel with a thickness of 0.375 inch, with all hardware galvanized43.27308.90.00.95Grills, air diffusers or ducts of iron or steel43.2017308.90.00.99Turnbuckle stud assemblies for cable-barrier systems, of steel, including threaded stud and nut, with a diameter of 1 inch, with a length of 7.87 inches, galvanized;Cable spacers for cable-barrier systems, of steel, with a length of 0.15 m, galvanized;Sleeve covers for cable-restraint system posts, of steel, with a width of 0.15 m, with a length of 0.2 m, hot-dip galvanized;Dust covers for cable-restraint system posts, of steel, with a diameter of 180 mm, with a depth of 50 mm, galvanized;Cable-barrier posts, of carbon steel, with a nominal height of 5.7 feet, with a length of 1.52 m, 10-gauge, galvanized;Short posts for cable-barrier systems, of carbon steel with a length of 1.2 m, galvanized;Post straps for cable-barrier systems, of steel, with a thickness of 6 mm, galvanized;Post caps for cable-barrier systems, of steel, stamped, with a nominal height of 7.7 feet, with a width of 0.15 m, with a length of 0.15 m, hot-dip galvanized;Washers, of carbon steel, with an inner diameter of 0.31 inch, with a zinc coating;Washers, of hardened steel, of specification ASTM F436, with a diameter of 0.75 inch;Hex nuts, of steel, of specification ASTM A194 2H, with a diameter of 0.75 inch;Hex bolts, of steel, of specification ASTM A307, with a diameter of 0.31 inch, with a length of 1.75 inches;Structural hex bolts, of steel, of a standard ASTM A325, with a diameter of 0.75 inch, with a length of 4.50 inches;Post straps, of steel, with a thickness of 6 mm, with a length of 0.2 m, galvanized;Hook bolts, of steel, with threaded section and formed hook end, with a diameter of 0.31 inch, with a length of 1.75 inches, for use with cable-barrier post assemblies;Guardrail offset blocks or king blocks, of high-density polyethylene (HDPE), with a thickness of 4 inches, with a height of 7.5 inches, with a length of 14 inches;Cable lock bolts, of steel, with a locking head for cable retention, with a diameter of 0.31 inch, for use in cable-barrier assemblies;Lower posts for cable restraint system, of galvanized steel, with a length of 84 inches, for use in roadside barrier systems;Post caps, of steel, stamped, galvanized, with a width of 150 mm, with a length of 150 mm;Washers, of hardened steel, of specification ASTM F436, with a diameter of 1 inch;Retroflective panels, of steel, with a width of 5 inches, with a length of 24 inches, galvanized or coated;Cable stud assemblies, of steel, with a diameter of 25 mm, machined threads;Terminal posts, of steel, for Test Level (TL-4) barrier systems, with a length of 71.62 inches, galvanized;Driven sleeves, of steel, with a wall thickness of 0.19 inch and with a length of 30.75 inches, galvanized finish;Base angles for cable anchor, of steel, with a thickness of 12 mm, with a width of 150 mm, with a length of 150 mm, galvanized finish;Cable-restraint post brackets, of steel, with a thickness of 6 mm;Line posts for a cable-control terminal of steel, galvanized;Cable-restraint posts, of steel, galvanized, with a length of 0.61 m, supplied as an upper release-post assembly;End terminals for roadside guardrail systems, of steel, meeting MASH Test Level 3 performance criteria, consisting of posts, release hardware and anchorage components;Hex nuts, of carbon steel, of a standard ASTM A563, with a diameter of 0.31 inch;Hex nuts, of steel, of a standard ASTM A194 2H, with a diameter of 1 inch;Insulated metal panels, consisting of two profiled steel facings bonded to a rigid polyisocyanurate foam core, with a width of 40 inches, with a thickness of 3.0 inches or 4.5 inches, of a length of at least 96 inches but not exceeding 374 inches, with a polyvinylidene fluoride (PVDF) coating on the exterior facing and a polyester coating on the interior facing;Insulated structural panels, consisting of a mineral-wool core bonded to steel facings of 22-gauge, 24-gauge or 26-gauge thickness, with a width of 42 inches or 43 inches, of a length of at least 8 feet but not exceeding 48 feet, with a thickness of 3 inches or of at least 4 inches but not exceeding 8 inches43.37309.00.00Reservoirs, tanks, vats and similar containers for any material other than compressed or liquefied gas, of iron or steel, of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment43.47310.10.00Reconditioned or remanufactured 55 US gallon steel drums, of specification UN recertified, both tighthead and openhead447310.21.00Cans which are to be closed by soldering or crimping, of iron or steel, of a capacity of less than 50 litres, whether or not lined or heat-insulted, but not fitted with mechanical or thermal equipment44.017310.29.00.20Cans, other than cans which are to be closed by soldering or crimping, of iron or steel, of a capacity of less than 50 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment44.027311.00.00Containers for compressed or liquefied gas, of iron or steel44.037312.10.00Stranded wire, ropes, and cables, of iron or steel, not electrically insulated44.047314.20.00Modular welded wire mesh security walls of steel, with steel tube posts and hinged doors, powder-coated finish44.057317.00.00Nails of iron or steel, certified for steel and metal manufacturing construction, of a diameter of at least 4 mm but not exceeding 1 inch, coated or uncoated44.0517318.11.00Railroad track bolts, of heat-treated carbon steel, with matching untreated carbon steel nuts, with a diameter of 1.000 inch or 1.125 inch44.067318.15.00Welded metal fasteners, “Weld Studs”, cold forged or hot forged, threaded or unthreaded, headed or unheaded, tapped, with or without a collar, flanged and un-flanged, with diameter of at least 2 mm but not exceeding 32 mm;Insulation fasteners and weld pins for HVAC ductwork and insulation installation44.0617318.15.00.42Armour bolts, of carbon or alloy steel, forged, hardened and tempered, with oval heads, oval collars (anti-rotation), UNC-2A threads, with a nominal diameter of at least 1.5 inches but not exceeding 2.0 inches, with a length under head of at least 7 inches but not exceeding 45 inches;Threaded hex bolts, of stainless steel, of grade 316L, of a nominal diameter of 0.375 inches or 0.500 inch, of a length of 3.25 inch, 3.50 inches or 5.50 inches, with thread pitches of 16 or 13 threads per inch44.077318.15.00.45Double-ended stud, of standard M8, with thread pitch of 1.25 mm and length of 37 mm, with external 6-lobe drive and 17.5 mm header point, with acid treatment and zinc or nickel coating;Double ended stud, of standard M8, with a thread pitch of 1.25 mm and length of 25 mm, pan head serrated neck, of grade 10.9, zinc coating;Double ended stud, of standard M6, with a thread pitch of 1.00 mm, of grade 10.9, with zinc coating;Projection weld stud of standard M8, with a length of 30 mm, with zinc coating;Round-interior studs, of standard M6, with a diameter of 18.75 mm, with a rod diameter of 0.3050 inch, plain coating;Studs, of M6 standards, with a 23.75 mm head diameter, with a 1.5 mm thread pitch, with a 25 mm length, with a rod diameter of 0.3450 inchStuds, of M6 standard, of 18.97 mm head diameter of the stud, with a thread pitch of 1.0 mm, with a length of 21 mm, with a rod diameter of 0.3050 inch;Studs, of M6 standard, with 18.97 mm head diameter, with a 1.0 mm thread pitch, with a length of 20 mm length, with a rod diameter of 0.3050 inch44.087318.15.00.49Bolts, flange head, self-tapping, of standard M10, with a thread pitch of 1.5 mm and a length of 30 mm, meeting GM6202M, with a thread-forming surface treatment;Socket bolts, of standard M12, with a thread pitch of 1.75 mm and a length of 120 mm, of grade 8.8, with a corrosion-protective surface treatment, meeting automotive specifications;Clinch pins, of steel grades SAE 10B21 or 10B22, of 6 mm diameter and 12.5 mm length, with zinc-plated coating for corrosion protection;Bolts, hex flange, of standard M12, with a thread pitch of 1.75 mm and a length of 80.0 mm, of property class 10, with a corrosion-protective aluminum-organic surface coating;Bolts, hex flange, of standard M12, with a length of 120 mm, of property class 10, with a corrosion-protective aluminum-organic surface coating44.097318.16.00.90Hex nuts, of projection weld type, of standard M12, with a thread pitch of 1.25 mm, of grade 8 steel, with a bare surface and rust-inhibitor treatment;Weld studs, of standard M6, with a thread pitch of 1.0mm, with a length of 16mm, of specification GMW25M (8.8) with a maximum carbon content of 0.26% and plain coating;Studs, projection-weld, of standard M6, with a thread pitch of 1.0 mm, with a length of 25 mm, of specifications GMW25M;Studs, projection weld type, of standard M6, of 1.0 mm thread pitch and 20 mm length, of property class 8.8;Weld hex nuts, of standard M8, of 1.25 mm thread pitch, with head diameter of 22.5 mm, of 0.59 inch wire rod;Threaded anchor nuts, of iron or steel, with a nominal diameter of 35 mm or 46 mm44.0917318.19.00.00Threadbars, of steel, of grade 150, of specification ASTM A722, with a nominal diameter of 1.375 inches or 1.750 inches, with a length of 16.8 feet, 17 feet, 20.62 feet or 22.5 feet44.17318.21.00Washers or retaining washers used in conjunction with “weld studs” or “weld pins” , with inside diameters of at least 1.6 mm but not exceeding 6 mm44.1017318.22.00.00Non-threaded washers, of stainless steel, of grade 316L, of nominal size 0.375 inch or 0.500 inch44.1027322.90.10Non-recirculating direct, gas-fired industrial air heaters, in compliance with ANSI Standard Z83.4 and CSA 3.744.1037326.11.00Semi-autogenous grinding balls for mills, of steel containing 0.6% carbon, forged or stamped, with a diameter of 5 inches;Forged or stamped steel grinding balls for mills, heat-treated, with a diameter of 3.5 inches44.117326.19.10Flanged wellhead tubing heads and flanged casing head spools, in the rough, for use in the manufacture of wellhead tubing heads or casing head spools44.127326.19.90Other articles of iron or steel, forged or stamped, but not further worked, other than grinding balls and similar articles for mills44.1217326.90.90Steel hose clamps, single-band type, of grade 51CrV4, of specification SAE J404 6150M, of a thickness of at least 0.98 mm but not exceeding 1.08 mm, with a width of 15 mm, of a nominal size of 16 mm or 17 mm, of a closed diameter of 14.9 mm or 15.6 mm, of a full-open diameter of 17.5 mm or 18.5 mm, of a clamping force of 145 mm or 195 mm, with a chrome-free zinc-based epoxy coating;Steel hose clamps with plastic removal clips, double-band type, of grade 51CrV4, of specification SAE J404 6150M for the band and of grade PA55 Type 6.6 , of a thickness of at least 0.98 mm but not exceeding 1.08 mm, with a width of 10 mm or 15 mm, of a nominal size of 16 mm or 17 mm, with a chrome-free zinc-based epoxy coating;Steel spools, cold-rolled, of grade CQ1008 or CQ1010, fabricated with an eight-rib design, with flange diameters of 8 inches and 10 inches, with a drum diameter of 4.5 inches, with a traverse length of 6 inches, with an arbor size of 1.25 inches, painted;Forged steel saw-blade blanks, with coating;Breakaway couplings, machined from round ETD 4142 alloy-steel bar stock, hot-wrought to a specification ASTM A29/A29M-20, galvanized after machining to ASTM A153 and packaged with hardware galvanized to ASTM A653;Breakaway couplings, of alloy steel, hot-wrought, of grade ETD 4142, galvanized to ASTM A513, with hardware;Female anchoring systems for concrete, comprising a pinch-welded assembly of a stainless steel washer of grade 304, a steel coil of grade 1080 with a diameter of 0.4375 inch, a stainless steel internally threaded ferrule of grade 304 with a 0.625-inch-11 thread, and a carbon steel rod of grade 1045 with a diameter of 0.4375 inch;Steel hinge assemblies, with hinge plates of grade 4140/42, galvanized to ASTM A153, and supplied with galvanized attachment hardware44.137326.90.90.90Welded metal fasteners, “weld studs”, of mild or stainless steel; cold forged, hot forged, threaded or unthreaded, headed or un-headed, tapped, with or without a collar, flanged or un-flanged diameters of at least 2 mm but not exceeding 32 mm;Step assemblies, of steel, with standard drive operation and power switch kit, with a step extension of 25.5 inches, with a load capacity of 300 pounds;Stainless-steel cylindrical shell, of 10-gauge SA240-304 stainless-steel plate, with an outer diameter of 38 inches, with a length of 82 inches, with an 2B interior finish and a 180-grit exterior finish, welded on two sides, wrapped in polyvinyl chloride on two sides;Steel anchor heads for post-tensioning, of specification EN ISO 683-1 or EN ISO 683-2, for strand sizes 19-0.6, 27-0.6 and 31-0.6, for intermediate grouting, comprising galvanized multi-port anchors with two 0.75-inch National Pipe Taper (NPT) ports and associated anchoring and grouting components;Grout caps for use with strand sizes 19-0.6, 27-0.6, 31-0.6, 1.375 inches and 1.750 inches, of specification EN 10130, including stainless steel pipe fittings and ball valves;Three-piece wedges of iron or steel, of specification EN 10277, with a nominal diameter of 0.62 inch;Couplings, of type ASTM C1277 or CSA B602, with a neoprene sleeve and stainless steel shield and clamps, of a diameter of at least 1.5 inches but not exceeding 15.0 inches44.147601.20.00Round bars of aluminum alloy, forge quality, of a diameter of at least 1 inch but not exceeding 12 inches, of grade 2014, 2219, 6061, 7075, or 7175, of specifications SAE-AMS-QQ-A-367 and QQ-A-22544.157601.20.00.90Aluminium alloys scrap ingot of casting alloys 380 or 39044.167604.10.00.30Aluminum alloy extrusions, of a cross-section, with retaining channels, with a length of 10 feet, of a height of at least 0.75 inch but not exceeding 2.50 inches, anodized or painted finish44.177604.29.00Aluminum bars, rods and profiles, of grades 6061, 2011, 7075, 3003 and 5052, including hollow profiles and angles, without further surface plating44.187604.29.00.30Aluminum profiles, of aluminum alloy 6063-T6, of square cross section of T-slot design, of 25.4 mm width, of a 25.4 mm height/thickness, of a standard ASTM B221, of a length of at least 34 inches but not exceeding 96 inches, with an anodized finish44.197606.11.00Aluminum plates, sheets and strip, of grade 6061, 2011, 7075, 3003 and 5052, with a thickness exceeding 0.2 mm457606.12.00Aluminum coils, with a thickness of 0.0106 to 0.018 inch, with a width of 1.1650 to 10.7086 inches, with a polyester or epoxy laminate, of alloys 5352 and 5042;Aluminum sheets coated with an electron beam cure, with a thickness of 0.045 inch, in sheets of 49 inches × 97 inches;Aluminum plates, sheets and strip, of alloy AA1350 of a thickness exceeding 0.2 mm but less than 7 mm;Aluminum plates, sheets and strip, rectangular (including square), of aluminum alloy 1000 series, 3000 series, 5000 series, or 6000 series, with a thickness exceeding 0.2 mm;Aluminum sheets, rectangular (including square), of an aluminum alloy 2024-T3, of a standard ASTM B209, of a thickness of at least 1.803 mm but not exceeding 2.286 mm, with a width of 2 121 mm, with a length of 2 629 mm;Aluminum sheets, rectangular (including square), of grade AA3105, of a standard ASTM B209, of a width of at least 2.5 inches but not exceeding 24.0 inches, of a thickness of 0.381 mm but not exceeding 0.508 mm, with a polyester paint coating45.0017606.12.00.11Aluminum plates, sheets and strip, rectangular (including square), of 3104 alloy, of a thickness of at least 0.254 mm but not exceeding 0.259 mm, of a width of at least 1 454.0 mm but not exceeding 1 692.4 mm, uncoated;Aluminum sheet, rectangular (including square), of a thickness of at least 0.032 inch but not exceeding 0.040 inch, painted;Aluminum plates, sheets and strip, rectangular (including square), of 3104 alloy, of a thickness of at least 0.254 mm but not exceeding 0.259 mm, with a 1735.2 mm width, uncoated;Aluminum sheets, rectangular (including square), of grade 3105-H24, 3003-H14 or 5005-H34, of a standard ASTM B209, of a thickness of 0.032 inch or 0.050 inch, with a width of 48 inches, with a length of 96 or 120 inches, painted or anodized45.017606.12.00.12Aluminum plates, sheets and strip, rectangular (including square), of aluminum alloys, not clad, of a thickness of 7 mm or more45.027606.12.00.20Flat-rolled aluminum coils, of alloy 5182 H24, of a thickness of 0.85 mm and a width of 194.3 mm, with a black fluoropolymer laminate coating45.0217606.92.00Aluminum sheet, non-rectangular, in coils, of grade AA3105, of specification ASTM B209, of a width of 2.5 inches but not exceeding 24.0 inches, of a thickness of 0.381 mm but not exceeding 0.508 mm, coated with a polyester paint45.0227607.11.00.10Aluminum foil, rolled but not further worked, of alloy 1100-O or 8011-H22, of a thickness (excluding any backing) not exceeding 0.2 mm, with a bright surface finish45.037608.20.00Aluminum tubes or pipes of aluminum alloys, cylindrical shape, seamless, of grade AA6101 or AA6063, of specification ASTMB241 or ASTMB317, with a wall thickness of at least 0.109 inch but not exceeding 0.500 inch, of an outer diameter not exceeding 10 inches, of a length of at least 5 feet but not exceeding 40 feet;Aluminum tubes, in coils, of grade H14, of specifications AA3003-H14 and ASTM B483, with a wall thickness of 1.24 mm, with an outer diameter of 9.52 mm;Aluminum tubes, in coils, of grade H13, of specifications AA3003-H13 and ASTM B483M-95, with a wall thickness of 1.24 mm, with an outer diameter of 12.7 mm;Aluminum tubes, in coils, of grade H13, of specifications AA3003-H13, ASTM B483M-95 and MS 8580-A9, with a wall thickness of 1.24 mm, with an outer diameter of 15.88 mm;Aluminum tubes, in coils, of grade H14, of specifications AA3003-H14 and ASTM B483, with a wall thickness of 1.24 mm, with an outer diameter of 12.7 mm;Aluminum tubes, in coils, of grade H14, of specifications AA3003-H14 and ASTM B483, with a wall thickness of 1.24 mm, with an outer diameter of 15.88 mm;Aluminum tubes, in coils, of grade H12, meeting specifications AA3103-H12 and ASTM B483M-03, with a wall thickness of 1 mm, with an outer diameter of 12 mm;Aluminum tubes, in coils, of grade H12, of specifications AA3003-H12 and ASTM B483M-95M, with a wall thickness of 1 mm, with an outer diameter of 10 mm;Aluminum tubes, in coils, of grade H14, of specifications AA3003-H14 and ASTM B483, with a wall thickness of 1.65 mm, with an outer diameter of 19.05 mm;Aluminum tubes, in coils, of grade H14, of specifications AA3003-H14 and ASTM B483, with a wall thickness of 1.65 mm, with an outer diameter of 15.88 mm;Aluminum tubes, in coils, of grade H12, of specifications AA3003-H12 and ASTM B483M-95M, with a wall thickness of 0.9 mm, with an outer diameter of 9.52 mm;Aluminum tubes, in coils, of grade H12, of specifications AA3003-H12, ASTM B483M-95M and MS 8580-A9, with a wall thickness of 1.25 mm, with an outer diameter of 15 mm;Aluminum tubes and pipes, of grade 6061, 2011, 7075, 3003 and 505245.047609.00.00Self locking vane and rail system in 2 or 4 inch configurations used to redirect airflow in HVAC ductwork;Adjustable elbows for round HVAC ductwork;Flexible duct connector to reduce vibration transmission in HVAC ductwork;HVAC ductwork components allowing for branching off main HVAC ductwork;Straight flange and cleat system including integrated mastic for joining HVAC ductwork;Rolled or stamped angle rings for connecting round HVAC ductwork;Aluminum mechanical adapters, of hardcoat-anodized alloy, with 5-inch or 6-inch coupling configuration, including polymer bearing ring, with NFPA 1964;Aluminum 30-degree elbows, hardcoat-anodized, with a 5-inch rigid Storz coupling and a 3-inch female NH swivel rocker lug coupling, compliant with NFPA 1964 Standard, with powder coat finish inside and out;Aluminum, blind cap Storz couplings, heat-treated, with a diameter of 5 inches, supplied with a suction gasket and an 18-inch lanyard with 0.25-inch eyelet for attachment45.057610.10.00Rolling steel fire door; aluminum construction with extruded aluminum rails, side lock, commercial grade hardware, 2 inch or 3 inch ten ball bearing rollers and galvanized 11 gauge hinges45.067610.90.90.90Aluminium structures designed to cover reservoirs, tanks and bulk material storage facilities;Aluminum composite sheets, of a thickness of at least 3 mm but not exceeding 4 mm, consisting of a non-aluminum core bonded to two painted aluminum skins with a width of 0.02 inch45.077616.10.00Welded aluminum fasteners, “weld studs”, cold forged, threaded or unthreaded, flanged or un-flanged, of a diameters of at least 2 mm but not exceeding 16 mm45.087616.99.90Monitor and tablet mounts and parts thereof, including rail mounts, monitor mount bases, of cast aluminum, suitable for agricultural use45.0817616.99.90.90Aluminium composite material sheets, with a width of 62 inches, with a length of 196 inches, with a thickness of 0.157 inch, consisting of two aluminum skins of 0.02 inch, each with a polyvinylidene fluoride finish (PVDF) or fluoroethylene vinyl ether finish (FEVE) bonded to a non-aluminum core45.098207.13.00Rock drilling or earth boring tools with working part of cermets, and bits and parts45.18207.19.00Drill bits, drill bit bodies, rock drilling and earth boring tools, including parts45.118308.20.00Welded metal refractory fasteners of mild steel or stainless steel, “refractory anchors”, cold forged or hot forged, unthreaded, headed or unheaded, tapped, with or without a collar. stamped, formed, cut, flanged or un-flanged, of a diameter of at least 2 mm but not exceeding 19 mm45.128309.90.00Aluminum food can easy open ends;Steel metal closures, inside surface includes a polyester coating, of technical specifications ASTM T2, T3, T4, T5, DR7.5 or DR8, in nominal diameters of 38 mm, 40 mm, 48 mm, 58 mm, 63 mm, 70 mm or 82 mm;Steel food can ends and lids, including those made from tinplate (steel coated with a thin layer of tin) or tin-free steel (electrolytic chromium-coated steel, ECCS), lined or unlined with a food-safe polymer coating;Aluminum can ends, of a nominal diameter of at least 2.324 inches but not exceeding 2.340 inches, coated45.138311.30.00Solder, welding wire, braze discs and coated braze rods45.148418.69.90.80Refrigeration units, of a kind used for trucks, trailers or vans45.158425.42.00Hydraulic jacks customized for above ground tanks468517.69.00Machines for the reception, conversion and transmission of voice: talk through units (TTU) that are UL-listed and designed to be mounted on a countertop or window to allow for communication through glass or another barrier
SOR/2025-147, s.11SOR/2025-210, s. 30SOR/2025-210, s. 31SOR/2025-210, s. 32SOR/2025-210, s. 33SOR/2025-210, s. 34SOR/2025-210, s. 35SOR/2025-210, s. 36SOR/2025-210, s. 37SOR/2025-210, s. 38SOR/2025-210, s. 39SOR/2025-210, s. 40SOR/2025-210, s. 41SOR/2025-210, s. 42SOR/2025-210, s. 43SOR/2025-210, s. 44SOR/2025-210, s. 45SOR/2025-210, s. 46SOR/2025-210, s. 47SOR/2025-210, s. 48SOR/2025-210, s. 49SOR/2025-210, s. 50SOR/2026-16, s. 2SOR/2026-16, s. 3SOR/2026-16, s. 4SOR/2026-16, s. 5SOR/2026-16, s. 6SOR/2026-16, s. 7SOR/2026-16, s. 8SOR/2026-16, s. 9SOR/2026-16, s. 10SOR/2026-16, s. 11SOR/2026-16, s. 12SOR/2026-16, s. 13SOR/2026-16, s. 14SOR/2026-16, s. 15SOR/2026-16, s. 16SOR/2026-16, s. 17SOR/2026-16, s. 18SOR/2026-16, s. 19SOR/2026-16, s. 20SOR/2026-16, s. 21SOR/2026-16, s. 22SOR/2026-16, s. 22.1SOR/2026-16, s. 23SOR/2026-16, s. 24SOR/2026-16, s. 25SOR/2026-16, s. 26SOR/2026-16, s. 27SOR/2026-16, s. 28SOR/2026-16, s. 29SOR/2026-16, s. 30SOR/2026-16, s. 31SOR/2026-16, s. 32SOR/2026-16, s. 33SOR/2026-16, s. 34SOR/2026-16, s. 35SOR/2026-16, s. 36SOR/2026-16, s. 37SOR/2026-16, s. 38SOR/2026-16, s. 39SOR/2026-16, s. 40SOR/2026-16, s. 41SOR/2026-16, s. 42SOR/2026-16, s. 43SOR/2026-16, s. 44SOR/2026-16, s. 45SOR/2026-16, s. 46SOR/2026-16, s. 47SOR/2026-16, s. 48SOR/2026-16, s. 49SOR/2026-16, s. 50SOR/2026-16, s. 51SOR/2026-16, s. 52SOR/2026-16, s. 53SOR/2026-16, s. 54SOR/2026-16, s. 55SOR/2026-16, s. 56SOR/2026-16, s. 57SOR/2026-16, s. 58SOR/2026-16, s. 59(Section 4.1 and subparagraph 5(a)(ii))
GoodsColumn 1Column 2Column 3ItemTariff Classification NumberGoodsExpiry date17209.16.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness exceeding 1 mm but less than 3 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070March 13, 202627209.17.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness of at least 0.5 mm but not exceeding 1 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070March 13, 202637211.23.00Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled or cold-reduced, containing by weight less than 0.25% carbon, of specification ASTM 1045, 1050, 1055 or 1067-1070March 13, 202647211.29.00Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled or cold-reduced, other, of specification of ASTM 1045, 1050, 1055 or 1067-1070March 13, 202657304.41.00Alloy 800 stainless steel cylindrical shape seamless tubes, cold drawn with a wall thickness of at least 0.054 inch but not exceeding 0.109 inch, with outer diameter 0.50 inch, 1.00 inch or and 1.25 inches and length of at least 215.38 inches but not exceeding 675.00 inchesMay 17, 20255.17308.40.00Steel foundation repair bracket system, with a face plate with a width of 9.875 inches and a length of 13 inches, with a steel pier pipe and a steel pier sleeveOctober 31, 202567308.90.00Redirective, non-gating crash cushion assembly consisting of high molecular weight/high density polyethylene (HMW/HDPE) energy-absorbing cylinders mounted on a self-contained or concrete backup structure;Gating, flared end terminal system for roadside W-beam guardrail applications, in 6-post and 8-post configurations;Tangent end-terminal for W-beam guardrail systems, consisting of galvanized steel components, including guardrail sections, extruder head, hardware, and postsMarch 5, 202777308.90.00.99Redirective, non-gating crash cushion assembly to shield fixed roadside objects, consisting of a modular framework of steel beam panels enclosing a series of crushable energy-absorbing cartridges and a self-supporting plastic noseMarch 5, 202787318.16.00.85Weld nut with high-flange, for metal applications, with steel grade of 10, with metric thread sizes of 10 mm, and coating of polytetrafluoroethylene;Weld nut with high-flange (projection weld) for metal applications, with steel grade of 10, with metric thread sizes of at least 8 mm but not exceeding 12 mm, with coating of polytetrafluoroethyleneApril 2, 202697606.12.00.11H21 recycled aluminum coil, conversion coated on both sides and a thickness of 0.027 inchMarch 5, 2027
SOR/2025-147, s.11SOR/2025-210, s. 51SOR/2026-16, s. 60SOR/2026-16, s. 61(Section 4.2 and paragraph 5(a.1))
GoodsColumn 1Column 2Column 3Column 4ItemBusiness NumberTariff Classification NumberGoodsConditions1100326198NP00044407.14.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, untreated structural timbers of hem-fir (Western hemlock) (Tsuga heterophylla) and fir (Abies spp.)4407.19.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, untreated structural timbers of other coniferous species1.11004442234410.11.00.00Particle boards of wood or of other ligneous materials, of grade M2 Industrial, of a thickness of at least 0.625 inch but not exceeding 1.000 inch, of a width of at least 49 inches but not exceeding 61 inches of a length of at least 85.0 inches but not exceeding 113.5 inches21008506350813.50.00Mixed nuts, in shell, consisting of almonds, walnuts, hazelnuts, and pecans2008.19.90Pecans, blanched, dried, roasted, and glazed;Walnuts, small pieces, blanched, dried, and glazed, of a size of 5/16 inch or less2.11010976994819.40.00.90Paper mailers, of recyclable paper, with an external length of at least 12 inches but not exceeding 14 inches, with an external width of at least 9 inches but not exceeding 18 inchesFor sale to company with business number 8502466043101569663RM00021006.30.00.91Semi-milled or wholly milled long grain white rice, whether or not polished or glazed4101803575RM00014012.90.90.30Tire treadsImported for sale to company with business number 1226445375101928125RM0802.99.00Raw pecans, chopped6101963361RM00014409.29.10Unfinished solid white oak wood boards, either quarter sawn or live sawn, with tongue and groove edges, with plank widths of at least 4 inches but not exceeding 10 inches, for further processing into custom-finished wood flooring4409.29.90Unfinished solid Hickory (Carya ovata) wood boards, live sawn, with tongue and groove edges, plank widths of at least 4 inches but not exceeding 6 inches, for further processing into custom-finished wood flooring7103609160RM00014202.92.90Holster of molded plastic with or without a spare cartridge for handheld conducted energy devices6211.33.00Training suit made up of hook and loop panels, designed for use with handheld conducted energy device training cartridges that deploy hook-and-loop fastener darts8517.62.00Six bay dock for handheld conducted energy devices;Single bay dock for handheld conducted energy devices9304.00.90Handheld conducted energy devices9306.30.90Cartridges for handheld conducted energy devices formed from plastic, containing metal probes connected to 25 inches wires that are deployed by a compressed nitrogen charge8104275359RT00014819.10.00Corrugated packaging and raw materials used for further processing into specific packaging9104671094RT00078307.10.00Imported for sale to company with business number 8728943328418.50.10Imported for sale to company with business number 8728943328419.81.00.20Imported for sale to company with business number 8728943328419.81.00.90Imported for sale to company with business number 8728943329403.20.00.99Imported for sale to company with business number 87289433210104813662RM00011006.30.00Semi-milled or wholly milled rice, whether or not polished or glazed, of the following types: sweet rice;long grain rice;white parboiled rice11105604938RM00018418.50.10Imported for sale to company with business number 87289433212121054431RM00018516.50.00Imported for sale to company with business number 8728943329403.20.00.20Imported for sale to company with business number 87289433212.1121381677RM0013304.10.003304.20.003304.30.003304.91.003304.99.90.203304.99.90.903307.10.003401.11.903506.10.004819.10.00.904819.20.00.9013121478390RC00014823.69.00.90Custom paperboard trays14122463953RM00018418.69.90Imported for sale to company with business number 8728943328419.81.00.90Imported for sale to company with business number 872894332151225745853925.90.00.20Polymer matrix of high-density polyethylene netting, of specification ASTM D-638, with 0.100 inch thick strands and 0.150 inch spacing between strands, of a roll length of at least 100 feet but not exceeding 150 feet, of a roll width of at least 12 inches but not exceeding 60 inchesImported for sale to the Ontario Ministry of Transportation (MTO)15.1126343326RM00019506.99.00.60Imported for sale to company with business number 12261716016128522992BN00018309.90.00Can lids16.1131927808RM00014407.19.00.99Imported for sale to the ministère des Transports et de la Mobilité durable du Québec to fulfill contracts 851011526, 851025982, 851028206, 851010466, 851028169Imported for sale to company with business number 1140169609 to fulfill contract 224014418.99.00Imported for sale to the ministère des Transports et de la Mobilité durable du Québec to fulfill contracts 851011526, 851025982, 851028206, 851010466, 851028169Imported for sale to company with business number 1140169609 to fulfill contract 2240117133405829RP00011701.14.00Organic light brown sugar1701.99.90.30Finely milled organic cane sugar, blended with organic starch1703.10.90Organic molasses;Organic light molasses;Fancy molasses18133586628RM00018309.90.00Stoppers, caps and lids of base metal19140851943RC00034408.90.00Veneer sheets, of conifers, of a thickness of 1.6 mm or 2.1 mm20143460764RM00014407.11.00.23Green and dry wood, sawn boards, of white pine, of grade stained, clear, premium, or select, of a width of at least 3 feet but not exceeding 10 feet, of a length of at least 4 feet but not exceeding 16 feet21718866494RP00013918.90.10Ethylene vinyl acetate/polyethylene (EVA/PE) foam sheet, with a thickness of 6 mm, with a width of 40 inches and length of 80 inches, with high-performance pressure-sensitive adhesive (PSA 9077) coating22731056107RT00018806.23.00Unmanned aircraft, for remote-controlled flight only, with maximum take-off weight at least 7 kg but not exceeding 25 kgGoods imported to fulfill contract CW238449522.17545564707110.11.007110.19.007112.99.0022.2819576968RM0001 and 7595325008207.20.00Steel dies, of a grade H13, with at least 1 but not exceeding 8 cavities, with a diameter of at least 10 inches but not exceeding 18 inches, and with a length of at least 3 inches but not exceeding 10 inches23770095529RM00018418.69.90Imported for sale to company with business number 87289433223.17710662718302.50.00Imported for sale to company with business number 896718327 or 1051955988517.62.00Imported for sale to company with business number 896718327 or 1051955989401.61.90Imported for sale to company with business number 896718327 or 1051955989401.71.90Imported for sale to company with business number 896718327 or 1051955989401.79.10Imported for sale to company with business number 896718327 or 1051955989401.79.90Imported for sale to company with business number 896718327 or 1051955989401.80.90Imported for sale to company with business number 896718327 or 1051955989403.10.00Imported for sale to company with business number 896718327 or 1051955989403.30.00Imported for sale to company with business number 896718327 or 1051955989403.60.90Imported for sale to company with business number 896718327 or 1051955989403.70.90Imported for sale to company with business number 896718327 or 1051955989403.89.90Imported for sale to company with business number 896718327 or 1051955989403.91.00Imported for sale to company with business number 896718327 or 1051955989403.99.00Imported for sale to company with business number 896718327 or 105195598247768532859506.91.00.90Articles and equipment for general physical exercise24.1797131323RM00013304.99.90.10Broad-spectrum zinc oxide-based sunscreen lotions and sticksImported for sale to company with business number 137466199 or 88218732125802556332RM00014819.20.00Non-corrugated cardboard boxes with pre-printed graphic design26805038247RT00014408.90.00Green wood, veneer, of red alder, white oak, douglas fir, or douglas fir VG, of a width of at least 5.5 feet but not exceeding 12 feet, of a length of at least 86 feet but not exceeding 144 feet, of premium slicing grade27810199612RM00011806.90.90.19Chocolate chips of the following types: 53% dark chocolate;milk chocolate;butter scotch flavoured;semi-sweet;caramel flavoredImported for sale to company with business number 137466199 RT0001 or 122235922RT000128824659155RM00011302.19.00.90Konjac flour, of grade G429825387335RT00010805.10.00Fresh oranges0805.40.00Fresh grapefruit0805.50.00Fresh lemons and limes308276225494407.91.00.11Green and dry wood, sawn boards, of red oak, of grade 3A, of a thickness of 1 inch, of a width of at least 4 inches but not exceeding 30 inches, of a length of at least 4 feet but not exceeding 16 feet4407.91.00.91Green and dry wood (sawn boards) of white oak, of grade 1C of a thickness of 1 inch (4/4), with a width of at least 4 inches but not exceeding 30 inches, with a length of at least 4 feet but not exceeding 16 feet4407.99.00Green and dry wood (sawn boards) of hickory or walnut, of grade 1C, with a thickness of 1 inch (4/4), with a width of at least 4 inches but not exceeding 30 inches, with a length of 4 feet but not exceeding 16 feet4411.13.00.90Medium-density fiberboard, of a thickness of at least 5 mm but not exceeding 9 mm, of a width of at least 4 feet but not exceeding 16 feet, of a length of at least 4 feet but not exceeding 30 feet31833044035RC00010805.10.00.10Oranges (Valencia variety), maximum size 110 mm, minimum size 60 mm0805.22.00Clementines (Corsica variety), certified organic, maximum size 70 mm, minimum size 45 mm0805.40.00.10Pink grapefruit, maximum size 110 mm, minimum size 70 mm0805.50.00Lemons (Eureka variety) and limes (Latifolia variety), certified organic, with a maximum size 110 mm for lemons and 70 mm for limes, and a minimum size of 55 mm of lemons and 45 mm for limes31.18411759534418.29.00.12Doors, of wood and wood particles, 20-minute fire-rated, machined for locks, with a width of 36 inches, a height of 80 inches, a thickness of 1.75 inches, and plastic laminate surface finishImported for sale to company with business number 89311915632843741349MC00024407.91.00Wood of oak rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)4407.93.00Wood of maple rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)4407.97.00Wood of poplar and aspen rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)4407.99.00Wood rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)33844690347RM00016307.90.99.90First aid tourniquet, one-handed application, consisting of a textile strap with a windlass (plastic or aluminum) or ratcheting self-locking mechanismFrom March 4, 2025 to July 31, 2025, for imports for sale to York Region Community and Health Services. or from March 4 to April 30, 2026, for imports for sale to Government of Saskatchewan34849922893RT00011006.30.00Semi-milled or wholly milled rice, whether or not polished or glazed35858245772RM00018419.81.00.90Imported for sale to company with business number 87289433235.18618576399401.80.109403.70.109503.00.109503.00.909506.99.0036864676531RM00018419.81.00Imported for sale to company with business number 8728943328516.72.90Imported for sale to company with business number 8728943323787965143RM00011902.19.23.30Unprepared pasta of the following types:1.125 inch heavy wall elbow;1.15 inch mafalda;1.25 inch ribbons;1.25 inch penne rigate;1/2 cut cavatappi;mini rigatoni;1.5 inch rotini38891093452RM00013924.10.00Imported for sale to company with business number 8728943329403.70.90Imported for sale to company with business number 87289433239891577132RT0010207.14.91Boneless or bone in frozen chicken cuts and offal1602.32.93Frozen cooked or processed chicken parts, bone in or boneless40892695016RC00018418.69.90.70Refrigeration condensing units41893039321RM00013923.21.90.90Printed polyethylene bags with a bottom gusset, butterfly vents and laser perforation4819.20.00.90Cartons, boxes and cases, folding, of non-corrugated paper or paperboard42893736447RC00031006.30.00Non-aromatic rice varieties of either long or medium grain, without additives438946341123925.10.00.00Imported for sale to company with business number 8872589608418.69.90.40Imported for sale to company with business number 8872589608516.10.90Imported for sale to company with business number 88725896044896297645RM00013925.10.00Agricultural water tanks, of medium-density polyethylene with UV inhibitors, with translucent walls for level visibility and US gallon indicators, designed for liquids with a specific gravity of up to 1.7 relative to water at 4°C, equipped with polymer baffles for fluid control, with molded-in legs and band locators for tie-down, of a capacity of 3250 US gallons, 3750 US gallons or 4250 US gallons45898667639RM00018202.31.00Circular, scalloped, saw blades for high-speed circular saws, with a heat-traded steel body, with an outside diameter of 10 inches, rated for operating speeds up to 5,000 rpm;Reinforced abrasive cut-off wheel for high-speed circular saws, with an outside diameter of 14 inches, rated for operating speeds up to 5,000 rpm8205.59.90Snap to connect release forks, deburring blades, swivel sockets and hose pusher bars of chrome‑plated high‑carbon steel, for hydraulic service8207.20.00Two‑piece collet sets of hardened alloy‑steel cages, for positive-stop crimping tools, designed for nominal diameters of at least 1/4 inch but not exceeding 2 inches, with precision spacer rings8207.30.00.20Heavy‑duty collets and spacer rings of hardened high-alloy steel, for four‑wire spiral hoses and fittings, of sizes rated for crimp forces achieving at least 35 mm but not exceeding 42 mm, rated for operating crimp pressures of approximately 62 MPa8207.30.00.90 Ancillary crimp tooling including die rings, adapters, storage cages, pusher blocks, used in hydraulic crimping operations, of through‑hardened high‑alloy tool steel8208.20.00Circular cutting media for hydraulic‑hose preparations, with 7 inch or 14 inch diameter blades and reinforced cut‑off wheels, high‑speed‑steel bodies with hollow‑ground, scalloped teeth or bonded‑abrasive rims, and 25.4 mm arbor hole, compatible with industrial hose-cutting saws9403.20.00.99Powder‑coated mild‑steel storage for crimp tooling and hose assembly components, with a 15‑drawer die‑ring cabinet with foam indexing and single‑door hose‑component cabinet, supplied with M8 anchoring hardware468995059450404.10.10.000901.21.000901.22.00.000904.12.10.000910.12.00.001101.00.20.001512.19.19.001602.31.11.901602.31.92.001602.32.11.201602.32.94.001602.32.95.001703.10.90.001704.90.90.201806.90.90.991902.19.21.301902.19.22.901902.30.20.001902.30.311902.30.401905.90.51.002103.10.00.002103.20.10.002103.20.90.922103.30.20.002103.90.10.202104.10.00.002106.90.39.102106.90.94.002106.90.95.902202.10.00.903923.21.90.403923.21.90.903924.10.00.994819.10.00.904819.20.00.104820.90.00.006307.90.99.907229.90.00.907310.21.00.107318.15.00.427318.21.00.007323.93.90.908203.10.00.008204.11.00.408204.12.00.908204.20.00.208205.20.90.008205.40.00.008205.59.90.008205.70.90.008425.42.00.008443.32.00.908467.29.00.118471.60.00.908513.10.10.00
SOR/2025-147, s.11SOR/2025-210, s. 51SOR/2026-16, s. 62SOR/2026-16, s. 63SOR/2026-16, s. 64SOR/2026-16, s. 65SOR/2026-16, s. 66SOR/2026-16, s. 67SOR/2026-16, s. 68SOR/2026-16, s. 69SOR/2026-16, s. 70SOR/2026-16, s. 71SOR/2026-16, s. 72(Section 4.21 and paragraph 5(a.2)))
GoodsColumn 1Column 2Column 3Column 4Column 5ItemBusiness NumberTariff Classification NumberGoodsPeriodConditions1100086768RC00017208.26.00Coil that has all of the following characteristics:Grade: LAH340Y410TSpecification: MS.50002Thickness: 0.138 inchesWidth: 26.575 inchesLength: 12.205 inchesCoating: P&OFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: HR270LASpecification: GMW3032M-ST-SThickness: 0.138 inchesWidth: 26.75 inchesLength: 8.5 inchesCoating: P&OFrom March 13, 2025 to December 31, 20277208.27.00Coil that has all of the following characteristics:Grade: HR340LASpecification: GMW2M-ST-SThickness: 0.079 inchesWidth: 47.44 inchesLength: 15.905 inchesCoating: P&OFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: HR340LASpecification: GMW3032M-ST-SThickness: 0.079 inchesWidth: 30 inchesLength: 21.5 inchesCoating: P&OFrom March 13, 2025 to December 31, 20277208.38.00.10Coil that has all of the following characteristics:Grade: HR270LASpecification: GMW3032M-ST-SThickness: 0.118 inchesWidth: 33.5 inchesLength: 9.125 inchesCoating: P&OFrom March 13, 2025 to December 31, 2026Coil that has all of the following characteristics:Grade: HR270LASpecification: GMW3032M-ST-SThickness: 0.118 inchesWidth: 34.5 inchesLength: 9.125 inchesCoating: P&OFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: HR270LASpecification: GMW3032M-ST-SThickness: 0.138 inchesWidth: 28.5 inchesLength: 9.25 inchesCoating: P&OFrom March 13, 2025 to December 31, 20277208.39.00Coil that has all of the following characteristics:Grade: HR270LASpecification: GMW3032M-ST-SThickness: 0.091 inchesWidth: 24.016 inchesLength: 9.646 inchesCoating: P&OFrom March 13, 2025 to December 31, 20277208.53.00Blank, cut to length, that has all of the following characteristics:Grade: HR270LASpecification: GMW3032M-ST-SThickness: 0.118 inchesWidth: 24 inchesLength: 86.85 inchesCoating: P&OFrom March 13, 2025 to December 31, 20277209.16.00.90Coil that has all of the following characteristics:Grade: CR3Specification: GMW2M-ST-SThickness: 0.047 inchesWidth: 32.362 inchesLength: 6.693 inchesFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR3Specification: GMW2M-ST-SThickness: 0.049 inchesWidth: 26.7 inchesLength: 6.5 inchesFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR980T/700Y-MP-LCESpecification: GMW3399M-ST-SThickness: 0.047 inchesWidth: 47.795 inchesLength: 9.252 inchesFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR420LASpecification: GMW3032M-ST-SThickness: 0.043 inchesWidth: 42.756 inchesLength: 6.375 inchesFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-SThickness: 0.059 inchesWidth: 39.75 inchesLength: 13.3 inchesFrom March 13, 2025 to December 31, 20267210.30.00Blank, cut to length, that has all of the following characteristics:Grade: CR180B2Specification: GMW3032M-ST-SThickness: 0.059 inchesWidth: 32.677 inchesLength: 14.094 inchesCoating: EG 70G70GFrom March 13, 2025 to December 31, 20277210.49.00.60Blank, cut to length, that has all of the following characteristics:Grade: CR3Specification: GMW2M-ST-SThickness: 0.035 inchesWidth: 58.74 inchesLength: 16.457 inchesCoating: HDG 90G90GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR3Specification: GMW2M-ST-SThickness: 0.039 inchesWidth: 68.504 inchesLength: 37.008 inchesCoating: HDG 70G70GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR420LASpecification: GMW3032M-ST-SThickness: 0.039 inchesWidth: 28.5 inchesLength: 8.8 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 20277210.49.00.70Coil that has all of the following characteristics:Grade: LAC240Y320TSpecification: MS.50002Thickness: 0.0787 inchesWidth: 27.56 inchesLength: 40.35 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: LAC240Y320TSpecification: MS.50002Thickness: 0.0787 inchesWidth: 27.6 inchesLength: 37.8 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: LAC340Y410TSpecification: MS.50002Thickness: 0.0787 inchesWidth: 36.4 inchesLength: 31.1 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: LAH340Y410TSpecification: MS.50002Thickness: 0.098 inchesWidth: 30.95 inchesLength: 8.25 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: LAH340Y410TSpecification: MS.50002Thickness: 0.098 inchesWidth: 38.5 inchesLength: 13.55 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: LAH340Y410TSpecification: MS.50002Thickness: 0.098 inchesWidth: 38.7 inchesLength: 13.3 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: LAH340Y410TSpecification: MS.50002Thickness: 0.118 inchesWidth: 42.5 inchesLength: 17.6 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: LAH340Y410TSpecification: MS.50002Thickness: 0.1185 inchesWidth: 27.64 inchesLength: 13 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR3Specification: GMW2M-ST-SThickness: 0.047 inchesWidth: 43.504 inchesLength: 11.713 inchesCoating: HDG 70G70GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR3Specification: GMW2M-ST-SThickness: 0.047 inchesWidth: 44.488 inchesLength: 13.819 inchesCoating: HDG 70G70GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR3Specification: GMW2M-ST-SThickness: 0.098 inchesWidth: 70.236 inchesLength: 14.173 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-S or GMW16056 type AThickness: 0.071 inchesWidth: 29.3 inchesLength: 107 inchesFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-S or GMW16056 type AThickness: 0.071 inchesWidth: 29.6 inchesLength: 111 inchesFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-S or GMW16056 type CThickness: 0.071 inchesWidth: 29.3 inchesLength: 107 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-S or GMW16056 type CThickness: 0.071 inchesWidth: 29.6 inchesLength: 111 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR180B2Specification: GMW3032M-ST-SThickness: 0.059 inchesWidth: 29.488 inchesLength: 14.508 inchesCoating: HDG 70G70GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: HR550LASpecification: GMW3032M-ST-SThickness: 0.071 inchesWidth: 32.25 inchesLength: 59.25 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: HR550LASpecification: GMW3032M-ST-SThickness: 0.071 inchesWidth: 44.45 inchesLength: 59.25 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: HR550LASpecification: GMW3032M-ST-SThickness: 0.071 inchesWidth: 47.205 inchesLength: 59.37 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR780T/420Y-DPSpecification: GMW3399M-ST-SThickness: 0.055 inchesWidth: 52.362 inchesLength: 14.921 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR04Specification: MS.50002Thickness: 0.098 inchesWidth: 28.189 inchesLength: 78.465 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-S or GMW16056 type AThickness: 0.071 inchesWidth: 27 inchesLength: 108 inchesFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-S or GMW16056 type AThickness: 0.063 inchesWidth: 28.85 inchesLength: 104.33 inchesFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-S or GMW16056 type AThickness: 0.106 inchesWidth: 23.75 inchesLength: 105.57 inchesFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR340 LASpecification: GMW3032M-ST-SThickness: 0.051 inchesWidth: 33.25 inchesLength: 5 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR240LASpecification: GMW3032M-ST-S or GMW16056 type CThickness: 0.063 inchesWidth: 27 inchesLength: 99.5 inchesCoating: HDG 60G60GFrom March 13, 2025 to January 2, 20277211.19.00.10Coil that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-SThickness: 0.079 inchesWidth: 22.598 inchesLength: 3.28 inchesFrom March 13, 2025 to December 31, 20277211.19.00.90Coil that has all of the following characteristics:Grade: HR270LASpecification: GMW3032M-ST-SThickness: 0.091 inchesWidth: 22 inchesLength: 5.25 inchesCoating: P&OFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: HR270LASpecification: GMW3032M-ST-SThickness: 0.091 inchesWidth: 22.17 inchesLength: 7 inchesCoating: P&OFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: HR270LASpecification: GMW3032M-ST-SThickness: 0.091 inchesWidth: 22.5 inchesLength: 3.752 inchesCoating: P&OFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: HR340LASpecification: GMW3032M-ST-SThickness: 0.071 inchesWidth: 8.937 inchesLength: 7.5 inchesCoating: P&OFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: MS.50002Specification: LAH240Y320TThickness: 0.067 inchesWidth: 10.2 inchesLength: 8.5 inchesCoating: P&OFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: HR270LASpecification: GMW3032M-ST-SThickness: 0.118 inchesWidth: 21.5 inchesLength: 85 inchesCoating: P&OFrom March 13, 2025 to December 31, 20277211.23.00Coil that has all of the following characteristics:Grade: CR3Specification: GMW2M-ST-SThickness: 0.04 inchesWidth: 13.1 inchesLength: 8.86 inchesFrom March 13, 2025 to December 31, 20277212.20.00.30Coil that has all of the following characteristics:Grade: CR180B2Specification: GMW3032M-ST-SThickness: 0.031 inchesWidth: 12.992 inchesLength: 4.252 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR180B2Specification: GMW3032M-ST-SThickness: 0.033 inchesWidth: 15.5 inchesLength: 10 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR180B2Specification: GMW3032M-ST-SThickness: 0.039 inchesWidth: 16.339 inchesLength: 11.654 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR180B2Specification: GMW3032M-ST-SThickness: 0.028 inchesWidth: 12.5 inchesLength: 2.65 inchesCoating: EG 60G60GFrom March 13, 2025 to December 31, 20277212.30.00.30Coil that has all of the following characteristics:Grade: CR180B2Specification: GMW3032M-ST-SThickness: 0.031 inchesWidth: 12.992 inchesLength: 4.252 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR180B2Specification: GMW3032M-ST-SThickness: 0.033 inchesWidth: 15.5 inchesLength: 10 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Coil that has all of the following characteristics:Grade: CR180B2Specification: GMW3032M-ST-SThickness: 0.039 inchesWidth: 16.339 inchesLength: 11.654 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 20277212.30.00.40Coil that has all of the following characteristics:Grade: LAH340Y410TSpecification: MS.50002Thickness: 0.1185 inchesWidth: 14.87 inchesLength: 71.43 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR240LASpecification: GMW3032M-ST-S or GMW16056 type AThickness: 0.063 inchesWidth: 23.476 inchesLength: 81 inchesFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-S or GMW16056 type CThickness: 0.071 inchesWidth: 20.445 inchesLength: 107.008 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR270LASpecification: GMW3032M-ST-SThickness: 0.071 inchesWidth: 20.445 inchesLength: 107.008 inchesFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: CR340LASpecification: GMW3032M-ST-SThickness: 0.079 inchesWidth: 16.25 inchesLength: 101.125 inchesFrom March 13, 2025 to December 31, 2027Blank, cut to length, that has all of the following characteristics:Grade: IFC180Y330TSpecification: MS.50002Thickness: 0.118 inchesWidth: 20 inchesLength: 34.5 inchesCoating: HDG 60G60GFrom March 13, 2025 to December 31, 20272100101070RC3924.90.00.99Elevated pet food bowl frame of plastic, with adjustable legs and stainless steel bowl insertsFrom March 6, 2025 to April 10, 20253100124221RM00027309.00.00.702,500 US gallon water tanks of carbon steel, designed for non-pressurized liquid storageFrom March 13, 2025 and March 27, 20253.11001808687308.30.00High-speed, low headroom rapid roll overhead doors comprised of anodized aluminum rigid double-wall panels, with a width of 120 inches, with a height of at least 81 inches but not exceeding 83 inches, with powder-coated or galvanized steel door frame components7610.10.00High-speed, low headroom rapid roll overhead doors comprised of anodized aluminum double-wall slats, with a width of 118 inches, with a height of 90 inches, with galvanized steel frame components3.21006822447606.12.00Aluminum plates, sheets and strip, of aluminum alloy, of grade 3105 or 3004, with a hardness of H25, with a thickness of at least 0.305 mm but not exceeding 1.600 mm, with a width of at least 2.875 inches but not exceeding 24.000 inches, whether uncoated or with a polyester and siliconized modified polyester (SMP) coating3.3100773043 RM00017318.15.00.49Steel wheel studs, zinc-plated and sealed, of Grade 8 or 8.2; with a thread diameter of at least 0.5 inches, 16-20 threads (unified fine threads per inch); class 2A thread length of at least 1.75 inches but not exceeding 4.00 inchesFrom March 4, 2025 to October 1, 20264101400760RT00017218.99.00.90Stainless steel in ingots or other primary forms: semi-finished products of stainless steel7219.21.00Flat-rolled products of stainless steel, of a width 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness exceeding 10 mm7220.11.00Hot-rolled stainless steel plate, of a width of less than 600 mm , of a thickness of 4.75 mm or more7220.20.00Flat-rolled products of stainless steel, not further worked than cold-rolled or cold-reduced, of a width of less than 600 mm7222.11.00.91Hot-rolled stainless steel bars, round, of a diameter of 25 mm or more7222.19.00.11Hot-rolled stainless steel flat bars, of a diameter of 25 mm or more7222.19.00.29Hot-rolled stainless steel bars, of rectangular cross section7222.20.00Cold-formed or cold-finished stainless steel bars, of rectangular cross section7222.30.00Other bars and rods of stainless steel: angles, shapes and sections of stainless steel7222.30.00.30Other bars and rods of stainless steel: angles, shapes and sections of stainless steel, high nickel alloy7228.50.00.90Other bars and rods of solid alloy steel, not further worked than cold-formed or cold-finished7228.60.00300M AMS 6419 alloy steel round bars7326.19.90Steel forgings7326.90.90.90Open-die forged steel plate7604.29.00Aluminum alloy rods and bars7606.12.00Aluminum alloy plate, not clad7608.20.00Aluminum tubes and pipes, of aluminum alloys7616.99.90.29Aluminum castings7616.99.90.30Aluminum forgings4.11021773189401.31.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.39.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 13123106.9401.41.00From April 1, 2025 to September 1, 2025Imported for sale to company with business number 13123106.9401.49.00From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.52.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.52.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.53.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.53.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.59.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.59.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.61.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.61.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.69.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 13123106.9401.69.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.71.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.71.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.79.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.79.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.80.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069401.80.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.10.00From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.20.00From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.30.00From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.40.00From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.50.00From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.60.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.60.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.70.10From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.70.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.82.11From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.82.19From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.82.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.83.11From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.83.19From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.83.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.89.11From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.89.19From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231069403.89.90From April 1, 2025 to September 1, 2025Imported for sale to company with business number 131231064.21026082709406.20.00From March 19, 2025 to August 31, 2025Imported for sale to company with business number 1389100214.3103615142RM00019406.90.90Prefabricated modular building components, in wall, ceiling, door and floor sections, of steel, with a thickness of at least 4 inches but not exceeding 10 inches, a width of at least 5 inches but not exceeding 60 inches, and a length of at least 84 inches but not exceeding 160 inchesFrom August 1, 2025 to September 1, 2025Imported for sale to company with business number 808589568 or 7239857195104671094RT00077324.10.00.10From March 13, 2025 to October 31, 2025Imported for sale to company with business number 8728943327324.10.00.90From March 13, 2025 to October 31, 2025Imported for sale to company with business number 8728943325.1104708409RM0013 and 104708409RM00257208.27.00Flat-rolled products of carbon steel, in coils, hot-rolled, pickled and oiled of grade JIS G3113 SAPH 440, of a width of 600 mm or more, with a thickness of at least 2.26 mm but not exceeding 2.30 mmFrom March 4, 2025 to December 31, 2026Imported for sale to company with business number 8461708507209.16.00Flat-rolled products of carbon steel, in coils, not further worked than cold-rolled (cold reduced), of grade JIS G3135 SPFC 440, of a thickness of at least 1.32 mm but not exceeding 1.48 mm, with a width of 600 mm or more, uncoatedFrom March 4, 2025 to December 31, 2026Imported for sale to company with business number 8461708507225.30.00Flat-rolled products of alloy steel, in coils, hot-rolled, pickled and oiled, of grade JIS G3113 SAPH 440, of a width of 600 mm or more, with a thickness of at least 2.26 mm but not exceeding 2.30 mmFrom March 4, 2025 to December 31, 2026Imported for sale to company with business number 8461708507225.50.00Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade JIS G3135 SPFC 440, of a width of 600 mm or more, with a thickness of at least 1.32 mm but not exceeding 1.48 mmFrom March 4, 2025 to December 31, 2026Imported for sale to company with business number 8461708506119873420RM00027225.99.00Steel coils that have all of the following characteristics:Grade: Ductibor 1000Thickness: 1.14 mm to 2 mmWidth:1131 mm to 1240 mmCoating: Al-SiFrom March 13, 2025 to December 31, 2027Steel coils that have all of the following characteristics:Grade: Usibor 1500Thickness: 1.4 mmWidth: 1628 mmCoating: Al-SiFrom March 13, 2025 to December 31, 20277123307597RM00137210.49.00.60Imported for sale to vehicle manufacturers7212.30.00.30Imported for sale to vehicle manufacturers7318.16.00.90Imported for sale to vehicle manufacturers7318.19.00Imported for sale to vehicle manufacturers8123307597RM00197208.39.00Imported for sale to vehicle manufacturers7209.16.00.90Imported for sale to vehicle manufacturers7210.30.00Imported for sale to vehicle manufacturers7212.30.00.30Imported for sale to vehicle manufacturers7212.30.00.40Imported for sale to vehicle manufacturers7225.92.00.30Imported for sale to vehicle manufacturers7225.92.00.40Imported for sale to vehicle manufacturers7318.15.00.45Imported for sale to vehicle manufacturers7318.16.00.90Imported for sale to vehicle manufacturers7318.19.00Imported for sale to vehicle manufacturers9123307597RM00207210.11.00Imported for sale to vehicle manufacturers7211.19.00.90Imported for sale to vehicle manufacturers7211.23.00Imported for sale to vehicle manufacturers10123307597RM00227208.27.00Imported for sale to vehicle manufacturers7210.49.00.60Imported for sale to vehicle manufacturers7211.23.00Imported for sale to vehicle manufacturers7212.30.00.40Imported for sale to vehicle manufacturers7226.91.00Imported for sale to vehicle manufacturers7318.15.00.45Imported for sale to vehicle manufacturers7318.16.00.90Imported for sale to vehicle manufacturers11123307597RM00297212.30.00.20Imported for sale to vehicle manufacturers7212.30.00.30Imported for sale to vehicle manufacturers7226.99.00.12Imported for sale to vehicle manufacturers7226.99.00.13Imported for sale to vehicle manufacturers12123307597RM00307208.27.00Imported for sale to vehicle manufacturers7210.49.00.50Imported for sale to vehicle manufacturers7210.49.00.60Imported for sale to vehicle manufacturers7212.20.00.30Imported for sale to vehicle manufacturers7212.30.00.20Imported for sale to vehicle manufacturers7212.30.00.30Imported for sale to vehicle manufacturers7212.30.00.40Imported for sale to vehicle manufacturers7225.91.00.20Imported for sale to vehicle manufacturers7225.92.00.20Imported for sale to vehicle manufacturers7318.15.00.45Imported for sale to vehicle manufacturers7318.15.00.49Imported for sale to vehicle manufacturers7318.16.00.90Imported for sale to vehicle manufacturers13123307597RM00337208.27.00Imported for sale to vehicle manufacturers7210.49.00.70Imported for sale to vehicle manufacturers7211.19.00.90Imported for sale to vehicle manufacturers7212.30.00Imported for sale to vehicle manufacturers7226.99.00.99Imported for sale to vehicle manufacturers14123307597RM00407208.27.00Imported for sale to vehicle manufacturers7211.19.00.90Imported for sale to vehicle manufacturers7212.30.00.40Imported for sale to vehicle manufacturers15127109387RT00017308.90.00.99The following guard rail end barrier systems, of specification AASHTO M180, NCHRP-350 (test level TL-3) and MASH (test level TL-3), with an A123 coating:FLEAT-SP;FLEAT 350;SKT 350;SKT-SP;BEAT;FLEAT MT;BEAT MTFrom March 13, 2025 to April 22, 2027Imported for supply to the ministère des Transports et de la Mobilité durable of Quebec161295536737306.30.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607307.22.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607307.23.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607307.29.99March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607307.99.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607309.00.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607312.10.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607318.14.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607318.15.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607318.16.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607318.19.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607318.22.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607325.99.99March 13, 2025 to January 1, 2026Imported for supply to company with business number 8872589607326.90.90March 13, 2025 to January 1, 2026Imported for supply to company with business number 88725896016.1131927808RM00017308.90.00Semi-rigid guardrail end device systems for SKT-350 and Fleat-350 systems, of specifications AASHTO M180, NCHRP-350 (performance level TL-3) and MASH (performance level TL-3) with a A123 coatingFrom March 4, 2025 to December 12, 2027Imported for sale to the ministère des Transports et de la Mobilité durable du Québec and to fulfill contracts 851011526, 851025982, 851028206, 851010466, 851028169From March 4, 2025 to October 31, 2026 Imported for sale to company with business number 1140169609 to fulfill contract 22401Imported for sale to company with business number 1140169609 to fulfill contract 224017312.10.00.31Semi-rigid guardrail end system cables of specifications AASHTO M30-02 and ASTM A741 Type 2, Class A, with galvanized fittings of specification ASTM A-153 Class CFrom March 4, 2025 to December 12, 2027Imported for sale to the ministère des Transports et de la Mobilité durable du Québec and to fulfill contracts 851011526, 851025982, 851028206, 851010466, 851028169From March 4, 2025 to October 31, 2026Imported for sale to company with business number 1140169609 to fulfill contract 2240117133586628RM00017310.29.00Tanks, casks, drums or cans, of a capacity of less than 50 litres18897419461RM0002, 897264149RM0005 and 867876195RM00057208.39.00Imported for sale to company with business number 1009639417210.30.00Imported for sale to company with business number 1009639417210.49.00.50Imported for sale to company with business number 1009639417210.49.00.60Imported for sale to company with business number 1009639417210.49.00.70Imported for sale to company with business number 1009639417211.29.00Imported for sale to company with business number 1009639417212.30.00.40Imported for sale to company with business number 1009639417220.20.00.90Type 435 stainless steel coil, with a thickness of 0.5 mm, of a width of 324.0 mm, 400.0 mm or 495.3 mm, coated with protective film;From March 13, 2025 to December 31, 2025Type 436 stainless steel coil, with a thickness of 0.5 mm, with a width of 50.8 mm, coated protective film;From March 13, 2025 to December 31, 2025Type 436 stainless steel coil, with a thickness of 0.4826 mm, of a width of 222.25 mm, 450.90 mm, 596.90 mm, or 736.60 mm, coated protective film;From March 13, 2025 to December 31, 2025Type 430 stainless steel coil, with a thickness of 0.4 mm, with a width of 28.44 mm, used to produce a roof ditch moldingFrom March 13, 2025 to December 31, 20257225.91.00.10Imported for sale to company with business number 1009639417225.91.00.40Imported for sale to company with business number 1009639417225.92.00.40Imported for sale to company with business number 1009639417226.99.00.19Imported for sale to company with business number 10096394119140433293RC00027214.99.00Bars of steel, round, of grade 40, 50 or 60, of specification CSA G40.21, ASTM A706 or ASTM A615, of a diameter of at least 0.75 inch but not exceeding 1.5 inches, of a length of at least 20 feet but not exceeding 40 feet, coated with epoxy per ASTM A775/A775M.20712584135RM00019506.91.00.90Articles and parts of steel, galvanized steel, high-density polyethylene (HDPE) plastic or aluminum, used to construct outdoor play structures, including installation kitsFrom March 21, 2025 to April 4, 2025Imported for sale to company with the business number 857850044RT00001217212020187309.00.00Bolted steel glass coated wall panels for a 3.84 million litre custom-built potable water storage tank, of a thickness of 0.2188 inch, 0.25 inch or 0.3125 inch, with AWWA D103 standard, with a width of 57 inches, with a length of 112.03 inches;From March 13, 2025 to January 31, 2026Imported for sale to company with business number 104625660 or 108128166Bolted steel glass coated wall panels for a 3.84 million litre custom-built potable water storage tank of a thickness of 0.5 inch compliant with AWWA D103 standard, with a width of 18.92 inches, with a length of 116.29 inchesFrom March 13, 2025 to January 31, 2026Imported for sale to company with business number 104625660 or 108128166.7610.90.90.10Aluminum dome, disassembled, for a 3.84 million litre custom potable water storage tank, of AWWA D103 standardFrom March 13, 2025 to January 31, 2026Imported for sale to company with business number 104625660 or 10812816622723167151RM00019504.30.00Games operated by coins, bank notes, bank cards, tokens or by other means of paymentFrom March 4, 2025 to April 25, 202523742981707PG00014202.12.90Transport cases with exterior dimensions of 62.5 cm in length, 50 cm in width and 29.7 cm in height and interior dimensions of 55.9 cm in length, 43.2 cm in width and 25.4 cm in height, with lid depth of 51 mm, bottom depth of 203 mm and total depth of 254 mmFrom March 15, 2025 to September 1, 2025Imported for sale to the Royal Military College of Canada247475429349506.91.00.90Articles and equipment for general physical exerciseFrom March 20, 2025 to March 28, 202525755380318RT00017210.49.00.70Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, in coils, of a thickness of at least 1.6 mm but not exceeding 4.2 mm, chemically treated, with a zinc coating7211.29.00Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, in coils, of a thickness of at least 1.6 mm but not exceeding 4.2 mm, chemically treated, with a zinc coating7211.90.00Flat-rolled products of carbon steel, of a width of less than 600 mm, in coils, coated or plated with aluminum, of a thickness of at least 1.6 mm but not exceeding 4.2 mm;Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, in coils, of a thickness of 1.6 mm to 4.2 mm, with a polymeric or plastic coating25.17595325007601.20.00Aluminum alloy cylindrical billets, with a diameter of at least 7 inches but not exceeding 10 inches, and with a length of at least 23 inches but not exceeding 58 inches25.27710662717323.99.00From March 4, 2025 to August 31, 2025Imported for sale to company with business number 896718327; orFrom March 4, 2025 to December 15, 2025Imported for sale to company with business number 1051955987616.99.90From March 4, 2025 to August 31, 2025Imported for sale to company with business number 896718327; orFrom March 4, 2025 to December 15, 2025 Imported for sale to company with business number 10519559825.3774937114RM00017210.61.00.10Steel coils, of grade EDDS, of specification ASTM A463, with a nominal thickness of at least 0.0235 inches but not exceeding 0.0275 inches, a width of at least 32.875 inches but not exceeding 58.250 inches, and T1M-150 or T1M-120 coating, aluminizedFrom March 4, 2025 to July 1, 20267210.61.00.20Steel coils, of grade EDDS, of technical specification ASTM A463, with a minimum thickness of at least 0.060 inches but not exceeding 0.098 inches, a width of at least 31.625 inches but not exceeding 50.625 inches, with T1-40 coating, aluminizedFrom March 4, 2025 to July 1, 20267606.12.00.11Aluminum sheets, of grade 5052 H32, with a nominal thickness of 0.187 inches, with a width of 72 inches, with a length of 144 inchesFrom March 4, 2025 to July 1, 202625.4778840769RM00017211.23.00Flat-rolled products of non-alloy steel, not further worked than cold-rolled (cold-reduced), of grade SPC270D, with a thickness of at least 1.3487 mm but not exceeding 1.4503 mm, a width of at least 528.4089 mm but not exceeding 531.5839 mm26780854485RM0017228.60.00Unthreaded rod bars of alloy steel, cold finished, ground or turned and polished, of grade 4140, of specification ASTMA108, of a length of at least 22 feet but not exceeding 40 feet, with an outer diameter of at least 1.125 inches but not exceeding 1.5 inchesFrom March 13, 2025 to March 31, 20267304.31.00Cold drawn seamless tubes of non-alloy carbon steel, meeting ASTM 519, of an outer diameter of at least 1.625 inches but not exceeding 3.75 inches, of an inner diameter of at least 0.977 inch but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inchFrom March 13, 2025 to March 31, 20267304.51.00Cold-drawn seamless tubes of alloy steel, grades AISI 4130 or AISI 8630, meeting ASTM A519, of an outer diameter of at least 1.625 inches but not exceeding 3.75 inches, of an inner diameter of at least 0.977 inch but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inchFrom March 13, 2025 to March 31, 20267326.90.10Forged or extruded steel blanks for coupling, cold drawn seamless, of carbon or alloy steel, meeting ASTM A519, of an outsider diameter of at least 1.625 inches but not exceeding 3.75 inches, of inner diameters of at least 0.977 inches but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inchFrom March 13, 2025 to March 31, 202627791357346RT00019405.11.00Chandeliers and other electric ceiling or wall lighting fittings, designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 20259405.19.00Chandeliers and other electric ceiling or wall lighting fittings, other than those designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 20259405.21.00Electric table, desk, bedside or floor-standing luminaires, designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 20259405.29.00Electric table, desk, bedside or floor-standing luminaires, other than those designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 20259405.42Other electric luminaires and lighting fittings, designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 20259405.49Other electric luminaires and lighting fittings, other than those designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 202528816010631RT00015703.29.90Commercial-grade nylon carpet with custom-printed patterns that glow under UV lightingFrom March 27, 2025 to April 2, 2025.Imported for sale to company with business number 77923342828.1819576968 RM00017601.20.00Aluminum alloy billets, cylindrical, with a diameter of at least 7 inches but not exceeding 10 inches, with a length of at least 23 inches but not exceeding 58 inches298387829448419.81.00Portable pizza oven, of a kind for use in a food truckFrom March 4, 2025 to April 25, 202530841564214RT00011003.90.91Feed barleyFrom March 4, 2025 to May 31, 202531849087549RM00017606.12.00Aluminum alloy plates, sheets, and strip, rectangular (including square) of a thickness exceeding 0.2 mm32855808044RM00017209.16.00.40Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, in coils, of a thickness of at least 1 mm but not exceeding 3 mm, of specification SDIFrom March 13, 2025 to December 31, 20257225.50.00Flat-rolled products of other alloy steel, of a width of 600 mm or more, cold-rolled, in coils, of carbon specification, dual phase uncoatedFrom March 13, 2025 to December 31, 20257606.12.00.20Aluminum plates, sheets and strip, rectangular (including square) of aluminum alloys, in coils, clad, of a thickness exceeding 0.2 mmFrom March 13, 2025 to December 31, 2025338561191517616.99.90Aluminum composite material, with a thickness of 4 mm, comprised of two 0.5 mm thick sheets of aluminum that are bonded to a 3.0 mm thick thermal plastic core33.1869553560 RM00017213.91.00.50Carbon steel wire rods hot-rolled, of grade SAE 1006, 1008/1010, 1010/1012, 1012/1015 or SAE 102, of specification ASTM A510, with a diameter of at least 5.5 mm but not exceeding 13.0 mmFrom March 13, 2025 to October 1, 20267213.91.00.60Carbon steel wire rods, hot-rolled, of grade SAE 1030, 1042, 1047/1050, 1052/1055 or SAE 1057, of specification ASTM A510, with a diameter of at least 5.5 mm but not exceeding 11.0 mmFrom March 13, 2025 to October 1, 20267213.91.00.70Carbon steel wire rods, hot-rolled, of grade SAE 1062, 1065, 1072, 1077, 1078 or 1080, of specification ASTM A510, with a diameter of at least 5.5 mm but not exceeding 7.0 mmFrom March 13, 2025 to October 1, 20267213.99.00.11Carbon steel wire rods, hot-rolled, of grade SAE 1008/1010, 1010/1012 or 1047/1050, of specification ASTM A510, with a diameter of at least 14 mm but not exceeding 16 mmFrom March 13, 2025 to October 1, 20267213.99.00.31Carbon steel wire rods, hot-rolled, of grade SAE 1047/1050, of specification ASTM A510, with a diameter of 14 mmFrom March 13, 2025 to October 1, 202634883281107RT00017226.92.00Flat-rolled strip steel for automotive seat tracks, cold-rolled and annealed, of a width of less than 600 mm, 1.7 mm thick, not further workedFrom March 13, 2025 to December 31, 202535885957597RT00017308.30.00.29Rolling steel door: McKeon model IS3020E-M-PCRemission limited to one rolling steel door, imported for supply to building project at 400 Albert Street, Ottawa, Ontario368872589607304.39.00From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan7307.99.00From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan7308.10.00From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan7308.90.00.99From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan7309.00.00From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan7318.15.00From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan7326.19.90From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan7326.90.90From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan36.18907778817307.92.00.10Couplings for Oil Country Tubular Goods (OCTG) of iron or non-alloy steel, of grades H40, J55 and K55, manufactured to API 5CT, with an outer diameter of at least 2.375 inches but not exceeding 16.000 inches, with a length of at least 4.5 inches but not exceeding 12.0 inchesFrom March 4, 2025 to April 1, 20277307.92.00.20Couplings for Oil Country Tubular Goods (OCTG) of other alloy steel (non-stainless), of grades L80, P110 and MS110, manufactured to API 5CT, with an outer diameter of at least 2.375 inches but not exceeding 16.000 inches, with a length of at least 4.5 inches but not exceeding 12.0 inchesFrom March 4, 2025 to April 1, 202737890975758RM0017304.19.00Hydraulic line, male-to-male JIC, rated for a nominal pressure of 3,000 psi, with a wall thickness of 0.120 inch, with an outer diameter of 1.25 inches, of a length of 48 inches, 72 inches, 96 inches, or 108 inches, with zinc-plated coatingFrom March 13, 2025 to December 31, 20257318.22.00Washers, of a thickness of 1/4 inch, 1/2 inch, 1 inch, or 2 inches, suitable for shimming hydraulic cylindersFrom March 13, 2025 to December 31, 2025388946341127307.29.99.00From March 13, 2025 to January 1, 2026Imported for sale to company with business number 8872589607309.00.00From March 13, 2025 to January 1, 2026Imported for sale to company with business number 8872589607322.90.10From March 13, 2025 to January 1, 2026Imported for sale to company with business number 88725896038.1897475166RM00017308.20.00Support towers, of steel, with a width of 10 feet, with a length of 10 feet, with a height of 100 feet, hot-dip galvanized, supplied in knockdown form for on-site assembly of grain storage systemsFrom March 28, 2025 to May 2, 20257308.90.00.99Steel base plate assembly, four plates with connecting angles, hot-dip galvanized, with a width and length of 10 feet, supplied in components for on-site assembly to align and anchor freestanding grain storage support towers;From March 28, 2025 to May 2, 2025Steel formed rung ladder and safety cage system, hot-dip galvanized with a length of 100 feet, with a step-through entry allowing vertical access, continuous rung ladder with intermediate rest platform and swing gateFrom March 28, 2025 to May 2, 202539898667639RM00017307.29.99.00Stainless‑steel push‑to‑connect quick-disconnect couplings with matching hose‑support clamps, with 1/4 inch national pipe tapered (NPT), with nitrile seals7307.91.00.10Hydraulic flange hose ends of carbon steel, of nominal diameter of at least 3/4 inch but not exceeding 2 inches, straight or 90 degrees, of SAE J518 Code 61 standard, with corrosion-resistant zinc‑nickel finish7307.91.00.20Hydraulic flange hose ends of carbon steel, of nominal diameter of at least 3/4 inch but not exceeding 2 inches, straight or 90 degrees, of SAE J518 Code 61 standard, with corrosion-resistant zinc‑nickel finish7307.92.00.10SAE 45 degree flare and flareless adapters for refrigeration and instrumentation applications, in brass or zinc‑plated steel, with an outer diameter of at least 6 mm but not exceeding 12 mm7307.92.00.20Permanent‑crimp hose ends for braided hose, made of carbon steel with zinc‑nickel plating, of nominal diameter of at least 1/4 inch but not exceeding 2 inches7307.99.00.11Air-brake hose with brass sockets and nipples, U.S.DOT (FMVSS 106) and Canadian CMVSS standard, of hose sizes of at least 1/4 inch but not exceeding 2 inches internal diameter7307.99.00.19Crimpless refrigerant fittings with bite‑type sleeve, assembly, available in carbon‑steel or brass, equipped with hydrogenated nitrile butadiene rubber (HNBR) O‑rings, for hoses of a nominal diameter of at least 1/4 inch but not exceeding 2 inches7307.99.00.21Crimpless repair splices and female ORFS (o-ring face seal) terminations of carbon steel, with elastomeric seals7307.99.00.29Permanent‑crimp hose ends for braided and spiral hose, of carbon steel with zinc‑nickel or stainless steel, for hoses of a nominal diameter of at least 1/8 inch but not exceeding 2 inches7318.16.00.90Carbon steel flare nut, used in hydraulic fitting assemblies and general-purpose applications7320.20.00.90Helical spring guards of carbon‑steel, with inner diameter of at least 7.9 mm but not exceeding 19 mm, of a length of 3.05 meters or 6.10 meters, with a finish of black oxide or bright zinc coating7326.90.10Non‑standard spiral‑hose crimp fittings with profiles of carbon steel, with zinc‑nickel coating, of size of at least 1/4 inch but not exceeding 2 inches7326.90.90.90Residual steel components: crimp ends, clamp halves, bite‑to‑wire adapters and sleeves7609.00.0037 degree flare adapters (male, female, union, bulkhead) and reusable sleeves for nylon air‑brake tubing, of 6061‑T6 aluminium, for hoses of nominal diameter of at least 3/16 inch but not exceeding 1 inch, with blue anodised finish7616.99.90.90Reusable swivel ends for use with hoses, of 6061‑T6 aluminium, with black/clear anodised, straight finish
SOR/2025-210, s. 51SOR/2026-16, s. 73SOR/2026-16, s. 74SOR/2026-16, s. 75SOR/2026-16, s. 76SOR/2026-16, s. 77SOR/2026-16, s. 78SOR/2026-16, s. 79SOR/2026-16, s. 80SOR/2026-16, s. 81SOR/2026-16, s. 82SOR/2026-16, s. 83(Paragraph 4.3(a))Motor Vehicles8703.23.00.108703.24.00.108703.24.00.218703.24.00.228703.33.00.108703.33.00.218703.33.00.22SOR/2025-147, s.11SOR/2026-162026-02-05SOR/2025-2692025-12-11SOR/2025-2102025-10-15SOR/2025-1472025-06-26