SOR/2016-19320166

22

20231

1

CANADA CONSUMER PRODUCT SAFETY ACTSurface Coating Materials RegulationsP.C.2016-62020166

21

His Excellency the Governor General in Council, on the recommendation of the Minister of Health, pursuant to section 37 of the Canada Consumer Product Safety Acta, makes the annexed Surface Coating Materials Regulations.aS.C. 2010, c. 21Interpretation

Definitions1The following definitions apply in these Regulations.accessible part means any part of a product that may be touched, licked, mouthed or swallowed during the reasonably foreseeable use of the product. (partie accessible)container means a container in which a surface coating material is sold to a consumer. (contenant)display panel means any part of a container on which the common or generic name of a surface coating material, or the description of its function, is displayed. (aire d’affichage)good laboratory practices means practices that are in accordance with the principles set out in the Organisation for Economic Co-operation and Development document entitled OECD Principles of Good Laboratory Practice, Number 1 of the OECD Series on Principles of Good Laboratory Practice and Compliance Monitoring, ENV/MC/CHEM(98)17, the English version of which is dated January 21, 1998 and the French version of which is dated March 6, 1998. (bonnes pratiques de laboratoire)surface coating material means a paint or other similar material, with or without pigment, that forms a solid film after it is applied to a surface and that can be removed. (revêtement)SOR/2022-122, s. 6

Surface Coating MaterialsLead

Lead content and test method2(1)A surface coating material must not contain more than 90 mg/kg total lead when a dried sample is tested in accordance with a method that conforms to good laboratory practices.Exceptions(2)Subsection (1) does not apply to a surface coating material that is used(a)as an anti-corrosive or anti-weathering coating on the interior or exterior surface of a building having an agricultural purpose or on equipment having an agricultural purpose;(b)as an anti-corrosive or anti-weathering coating on a structure, other than a building, having an agricultural or public purpose;(c)as a touch-up coating on metal surfaces;(d)in the production of outdoor graphic art, including billboard displays; or(e)in an art, craft or hobby activity, except if the surface coating material is used by children.

Warning3(1)Subject to subsections (2) and (3), if a surface coating material that is used for a purpose mentioned in subsection 2(2) contains more than 90 mg/kg total lead, the display panel on the container must contain the following warning, or its equivalent, with the italicized portion being replaced by the applicable uses:DANGERCONTAINS LEAD / CONTIENT DU PLOMBDO NOT APPLY TO SURFACES ACCESSIBLE TO CHILDREN OR PREGNANT WOMEN /NE PAS APPLIQUER SUR UNE SURFACE ACCESSIBLE AUX ENFANTS OU AUX FEMMES ENCEINTESMust be used exclusively [Insert the applicable uses mentioned in subsection 2(2)]. / Utiliser uniquement aux fins suivantes : [insérer les fins mentionnées au paragraphe 2(2) qui s’appliquent].Small containers(2)Subject to subsection (3), if the area of the display panel is less than 35 cm², the display panel may contain only the following warning:DANGERCONTAINS LEAD / CONTIENT DU PLOMBSignal word “DANGER”(3)If the warning required by subsection (1) or (2) is displayed in separate English and French display panels, the signal word “DANGER” must be displayed in each display panel, but if the warning is displayed in one bilingual display panel, the signal word “DANGER” need only be displayed once.

Legibility and type4(1)The warning required by section 3 must appear in(a)a permanent, clear and legible manner;(b)capital letters, except for the portion dealing with uses in the warning under subsection 3(1);(c)bold-face or medium-face sans serif type; and(d)type having the minimum height and size set out in columns 2 and 3 of the table to this subsection according to the display panel area set out in column 1.TABLEColumn 1Column 2Column 3ItemDisplay panel areaMinimum height of type (mm)Minimum size of type (points)1100 cm² or less1.542more than 100 cm² but not more than 330 cm²3.093more than 330 cm² but not more than 650 cm²6.0184more than 650 cm² but not more than 2 600 cm²9.0275more than 2 600 cm²12.036Calculation of display panel area(2)In the calculation of the area of a display panel, any seam and any convex or concave surface at the top or bottom of the container are to be excluded.Curved container — display panel area(3)In the case of a container that is curved in any way, other than a bag, the display panel area is 40% of the total area of the container, excluding the top and bottom.Determination of minimum height of type(4)For the purpose of paragraph (1)(d), the minimum height of type is determined by measuring an upper case letter or a lower case letter that has an ascender or descender, such as “b” or “p”.

Mercury

Mercury content and test method5A surface coating material must not contain more than 10 mg/kg total mercury when a dried sample is tested in accordance with a method that conforms to good laboratory practices.SOR/2022-122, s. 7(E)

Products With Applied Stickers, Films or Surface Coating Materials

Lead content6A sticker, film or other similar material that can be removed, or a surface coating material, that is applied to an accessible part of the following products must not contain more than 90 mg/kg total lead when it is tested in accordance with a method that conforms to good laboratory practices:(a)furniture;(b)products for children;(c)pencils; and(d)artist brushes.SOR/2022-122, s. 8

Repeal

7[Repeal]

Coming into Force

Registration8These Regulations come into force on the day on which they are registered.

SOR/2022-1222022-12-19