Electricity and Gas Inspection Regulations (SOR/86-131)

Regulations are current to 2013-05-20 and last amended on 2009-02-26. Previous Versions

SCHEDULE

(s. 47)

FEES AND CHARGES

PART I

FEES FOR SERVICING ELECTRICITY METERS AND ELECTRICITY METERING INSTALLATIONS

Column IColumn IIColumn III
ItemElectricity Meter or Electricity Metering InstallationOperational Location FeeOther Location Fee
1.Energy meter of the induction, transducer or electronic type
  • (a) per element

$10.00$ 2.00
  • (b) per half element

5.001.00
2.Demand meter of the
  • (a) mechanical block interval type

20.0020.00
  • (b) mechanical summation type

20.0020.00
  • (c) thermal or recti-thermal type

20.0020.00
  • (d) transducer type

20.0020.00
  • (e) electronic type

  • (i) per measurement unit of demand

20.0020.00
  • (ii) per cumulative demand function

3.003.00
3.Register of the
  • (a) single-rate energy type

3.001.50
  • (b) single-rate demand type, per function not included in item 2

3.003.00
  • (c) multi-rate energy or demand type

  • (i) temperature-activated,

  • (A) per rate

3.003.00
  • (B) per temperature probe

3.003.00
  • (ii) time-activated type, per rate

3.003.00
  • (iii) power line, radio or other frequency-activated type, per rate

3.003.00
  • (d) multi-rate, microprocessor-based, time-of-use type

  • (i) per rate

3.003.00
  • (ii) per calendar

10.0010.00
  • (iii) per time clock

10.0010.00
4.Transformer-loss or line-loss meter of the induction or electronic type10.006.00
5.Output pulse initiator of the contact relay, optical pick-up, transistor output, telephone output, current loop or fibre-optic type, per output signal10.006.00
6.Pulse recorder of the punch tape, magnetic tape or electronic type, per channel10.006.00
7.Pulse totalizer10.006.00
8.Pulse duplicator, per output10.006.00
9.Telemetering system
  • (a) automatic meter-reader type

10.006.00
  • (b) remote register type

3.003.00
10.Pre-payment device
  • (a) mechanical type

10.006.00
  • (b) electronic type, per billing function

10.006.00
11.Auxiliary timing device of the mechanical, electro-mechanical, or electronic type10.006.00
12.Event logger10.006.00
13.Controller of the mechanical, electro-mechanical or electronic type, per controlling function5.003.00
14.Multiple-customer measuring systemthe fee payable under column II or III of item 1 or 2 for the equivalent energy or demand meter
15.Apportionment billing system, per customer$10.00$6.00
16.Instrument transformer of the voltage or current type, per secondary10.006.00
17.Other electricity meters or metering functions not set out in items 1 to 1610.006.00
18.A combination meter that performs, under one cover, the functions of more than one of the meters set out in items 1 to 17the sum of the fees payable under column II or III of items 1 to 17, as applicable, for each meter or metering function for the component meters in the combination meter
19.A meter that has unsealed, user programmable or user-reprofilable measurement functionsthe sum of the fees payable under column II or III of items 1 to 17, as applicable, for each function capable of being programmed into the meter
20.A meter where the initial reverification period has been extended under subsection 12(1) of the Actthe fee payable for that meter under column II or III of items 1 to 19, as applicable, multiplied by the length of the extension in years and divided by the initial reverification period in years referred to in subsection 12(1) of the Act for that meter

PART II

ELECTRICITY METER INSPECTION OR SERVICE

Column IColumn II
ItemInspection or ServiceFee
1.Voltage test referred to in section 25 of the Act$ 25.00

PART III

[Repealed, SOR/95-333, s. 4]

PART IV

FEES FOR SERVICING GAS METERS AND GAS METERING INSTALLATIONS

Column IColumn IIColumn III
ItemGas Meter or Gas Metering InstallationOperational Location FeeOther Location Fee
1.Diaphragm-type, volumetric meter with an air capacity, at standard conditions and 125 Pa (0.5 in H2O) differential pressure, of
  • (a) less than 28 m3/h (1000 ft3/h)

$ 50.00$ 3.00
  • (b) 28 m3/h (1000 ft3/h) or more

50.008.00
2.Rotary-type volumetric meter with an air capacity, at standard conditions, of
  • (a) 283 m3/h (10 000 ft3/h) or less

50.0015.00
  • (b) greater than 283 m3/h (10 000 ft3/h), for each additional 283 m3/h (10 000 ft3/h) or part thereof

10.0010.00
3.Turbine-type volumetric meter with an air capacity, at standard conditions and 500 Pa (2.0 in H2O) differential pressure, of
  • (a) 283 m3/h (10 000 ft3/h) or less

50.0015.00
  • (b) greater than 283 m3/h (10 000 ft3/h), for each additional 283 m3/h (10 000 ft3/h) or part thereof

10.0010.00
4.Register of the
  • (a) single-rate type

3.001.50
  • (b) multi-rate type

  • (i) temperature-activated type

  • (A) per rate

3.003.00
  • (B) per temperature probe

3.003.00
  • (ii) time-activated type, per rate

3.003.00
  • (iii) demand-activated type, per rate

3.003.00
  • (c) multi-rate, microprocessor-based, time-of-use type,

  • (i) per rate

3.003.00
  • (ii) per calendar

10.006.00
  • (iii) per clock

10.006.00
5.Temperature or pressure measuring, recording or converting meter of the
  • (a) mechanical type

12.008.00
  • (b) electronic type, per range

12.008.00
6.Prepayment device of the
  • (a) mechanical type

10.006.00
  • (b) electronic type, per billing function

10.006.00
7.Telemetering system of the
  • (a) automatic meter-reader type

3.003.00
  • (b) remote register type

3.003.00
8.Transmitter12.008.00
9.Output signal initiator of the contact relay, current loop, fibre-optic, optical pick-up, telephone output or transistor output, per output10.006.00
10.Pulse recorder, per channel10.006.00
11.Pulse totalizer10.006.00
12.Pulse translator or duplicator, per output10.006.00
13.Controller of the mechanical, electro-mechanical or electronic type, per controlling function3.003.00
14.Event logger10.006.00
15.Auxiliary timing device of the mechanical, electro-mechanical or electronic type10.006.00
16.Pressure regulator10.006.00
17.Apportionment billing system, per customer10.006.00
18.Supercompressibility correcting meter of the
  • (a) mechanical type

12.008.00
  • (b) microprocessor-based type using

  • (i) input method 1 set out in the specifications made under section 45

30.0020.00
  • (ii) input method 2 set out in the specifications made under section 45

15.0010.00
  • (iii) a user-programmable input method, per input range

15.0010.00
19.Orifice meter fitting and tubes100.0040.00
20.Orifice plate5.005.00
21.Flow conditioner5.005.00
22.Flow computer, per meter-run20.0020.00
23.Chromatograph40.0030.00
24.Energy density meter40.0030.00
25.Energy-calculating meter40.0030.00
26.Energy-sensing meter40.0030.00
27.Density or relative density meter40.0030.00
28.Gas-sampling system10.0010.00
29.Natural gas dispenser10.0010.00
30.Other gas meters or metering functions not set out in items 1 to 2910.006.00
31.A combination meter that performs, under one cover, the functions of more than one of the meters set out in items 1 to 30the sum of the fees payable under column II or III of items 1 to 30, as applicable, for each meter or metering function for the component meters in the combination meter
32.A meter that has unsealed, user-programmable or user-reprofilable measurement functionsthe sum of the fees payable under column II or III of items 1 to 30, as applicable, for each function capable of being programmed into the meter
33.A meter where the initial reverification period has been extended under subsection 12(1) of the Actthe fee payable for that meter under column II or III, as applicable, of items 1 to 30, as applicable multiplied by the length of the extension in years and divided by the initial reverification period in years referred to in subsection 12(1) of the Act for that meter

PART V

GAS METER INSPECTION OR SERVICE

Column IColumn II
ItemInspection or ServiceFee
1.Relative density test$ 30.00
2.Water vapour test30.00

PART VI

CHARGES FOR INSPECTOR’S TIME AND EXPENSES

Column IColumn II
ItemTime/ExpensesCharges
1.Time spent performing requested function, including necessary travel, per half hour or part thereof,
  • (i) during inspector’s normal working hours

$25.00
  • (ii) outside inspector’s normal working hours

50.00
2.Accommodation, meals, incidental expenses during time referred to in item 1In accordance with current Treasury Board guidelines
3.Travel fare or mileage charge, where applicable, for inspector relating to travel as referred to in item 1In accordance with current Treasury Board guidelines

PART VII

AUDITS

Column IColumn II
ItemAuditFee
1.An accreditation audit referred to in section 24$1,000
2.Audits carried out pursuant to a condition referred to in section 251,000

PART VIII

DETERMINATION OF ELECTRICITY MEASURING APPARATUS ACCURACY

Column IColumn II
ItemElectricity Measuring ApparatusFee
1.Apparatus for measuring consumption in watt hours, volt-ampere hours, var hours or joules$300.00 for up to 15 points
2.Apparatus for measuring demand in watts, volt-amperes or vars200.00 for up to 10 points
3.Apparatus for measuring voltage or current200.00 for up to 10 points
4.Instrument transformers for use with any apparatus set out in items 1 to 3350.00 for up to 5 burdens at 3 points per burden
5.An apparatus set out in items 1 to 3 that requires, for determination of its accuracy, testing at a number of points greater than the number set out for that measuring apparatus in column II of that itemFor each additional point tested, 10 per cent of the fee for that item
6.Meter calibration console:
single test station$300.00
each additional test station20.00

PART IX

DETERMINATION OF GAS MEASURING APPARATUS ACCURACY

Column IColumn II
ItemGas Measuring ApparatusFee
Apparatus for Measuring Volume
1.Bell types, 2 cubic foot capacity or metric equivalent$150.00 for up to 5 points
2.Bell types, 5 cubic foot capacity or metric equivalent200.00 for up to 6 points
3.Bell types, 10 cubic foot capacity or metric equivalent300.00 for up to 11 points
4.Bell types, 50 cubic foot capacity or metric equivalent400.00 for up to 6 points
5.Bell types, 100 cubic foot capacity or metric equivalent500.00 for up to 11 points
6.Bell provers using volumetric transfer standards500.00
7.Positive displacement diaphragm types50.00 for up to 3 flow rates
8.Rotary and turbine types100.00 for up to 5 flow rates
9.Variable area flow types100.00 for up to 5 flow rates
10.Wet test types100.00 for up to 3 flow rates
11.Transfer types500.00 for up to 15 flow rates
Apparatus for Measuring Pressure
12.Barometer types100.00 for up to 5 points
13.Manometer types120.00 for up to 5 points
14.Dead weight types50.00 for up to 5 points
15.Mechanical gauge types50.00 for up to 5 points
16.Electronic types, with readout125.00 for up to 10 points
17.Electronic types, without readout100.00 for up to 5 points
18.Recording types150.00 for up to 5 points
Apparatus for Measuring Temperature
19.Mercury in glass types25.00 for up to 5 points
20.Electronic types, with readout150.00 for up to 10 points
21.Electronic types, without readout100.00 for up to 5 points
22.Recording types150.00 for up to 5 points
Other Gas Measuring Apparatus
23.Relative density meter, indicator types150.00 for up to 3 points
24.Relative density meter, recorder types200.00 for up to 3 points
25.Energy density meter200.00 for up to 1 point
26.Chromatograph150.00 for up to 1 point
Measuring Apparatus Requiring Additional Points Tested
27.A measuring apparatus set out in items 1 to 26 that requires, for determination of its accuracy, testing at a number of points greater than the number specified for that measuring apparatus in column II of that itemFor each additional point tested, 10 per cent of the fee for that item
  • SOR/87-212, ss. 6 and 7;
  • SOR/89-425, ss. 2 to 5;
  • SOR/95-333, ss. 3, 4;
  • SOR/2007-89, s. 2.